Grid view List view

Showing 601–612 of 7251 results

ABB PPE091A101

¥6,999.00

Technical Parameters

  • Device Type: Analog Input Module for ABB AC 800M / Freelance DCS Systems
  • Number of Channels: 8 differential analog inputs
  • Supported Input Signals: 4–20 mA DC, 0–20 mA DC, 0–10 V DC, thermocouple (Type J/K/T/E), RTD (Pt100)
  • Measurement Accuracy: ±0.1% of full scale (for 4–20 mA signals)
  • Sampling Rate: 10 Hz per channel (configurable up to 100 Hz for critical channels)
  • Operating Voltage: 24 V DC ±10%
  • Operating Temperature Range: -40°C to +70°C
  • Protection Rating: IP20 (cabinet-mounted installation)
  • Isolation: 2500 V AC between channels, between channels and controller logic
  • Compatibility: ABB AC 800M Controllers, ABB Freelance DCS, ABB Control Builder Professional
  • Certifications: CE, UL, CSA, IEC 61131-2, RoHS Compliant

ABB PHARPS32200000 F8-G2B9B3B6

¥5,299.00

Technical Parameters

  • Device Type: Industrial-grade DC power supply module for ABB control & protection systems
  • Input Voltage Range: 85–264 V AC (single-phase) / 120–375 V DC
  • Output Voltage: 24 V DC (regulated, ±1% accuracy)
  • Output Current: 5 A (continuous), 10 A (peak for 10 seconds)
  • Efficiency: ≥92% at full load
  • Operating Temperature Range: -40°C to +70°C
  • Protection Rating: IP20 (cabinet-mounted installation)
  • Protection Features: Overvoltage, overcurrent, short-circuit, overheating protection
  • Compatibility: ABB Relion 670/650 Series Relays, ABB System 800xA, ABB Control Builder Professional
  • Certifications: CE, UL, CSA, IEC 61010-1, RoHS Compliant

ABB UNS0119A-P V101

¥1,599.00

Technical Parameters

  • Device Type: Communication Interface Module for ABB Industrial Control & Protection Systems
  • Supported Protocols: IEC 61850, Modbus TCP/RTU, DNP3.0, ABB SPA Protocol
  • Communication Ports: 2× 10/100 Mbps Ethernet ports, 1× RS-485 serial port
  • Data Transfer Latency: ≤ 5 ms (for IEC 61850 GOOSE messages)
  • Operating Voltage: 24 V DC ± 15%
  • Operating Temperature Range: -40°C to +70°C
  • Protection Rating: IP20 (cabinet-mounted installation)
  • Isolation: 2500 V AC between communication ports and internal logic; galvanic isolation between Ethernet and serial ports
  • Compatibility: ABB Relion 670/650 Series Relays, ABB System 800xA, ABB Control Builder Professional
  • Certifications: CE, UL, CSA, IEC 61850-3, RoHS Compliant

ABB XUD194 XUD194A 3BHC018137R0001

¥5,299.00

Product Parameters

Parameter Category Specific Specifications
Product Model ABB XUD194 XUD194A 3BHC018137R0001
Working Voltage [To be supplemented with official data]
Operating Temperature Range [To be supplemented with official data]
Signal Transmission Interface [To be supplemented with official data]
Compatibility [Applicable ABB PLC system models, to be supplemented]
Protection Grade [To be supplemented with official data]
Service Life [To be supplemented with official data]

ABB 3BHL000986P0006

¥5,999.00

Technical Parameters

  • Device Type: Power module for ABB medium-voltage drive systems (ACS series)
  • Rated Voltage: 3.3 kV AC
  • Rated Current: 400 A
  • Operating Temperature Range: -25°C to +70°C
  • Cooling Method: Forced air cooling / liquid cooling compatible
  • Insulation Class: Class F (IEC 60085)
  • Protection Rating: IP20 (for cabinet-mounted installation)
  • Compatibility: ABB ACS 1000/2000 medium-voltage drives, ABB drive control units, ABB DriveMonitor software
  • Certifications: CE, UL, CSA, IEC 61800-3, RoHS compliant

ABB PDD205A1121

¥5,999.00

Technical Specifications ABB PDD205A1121

Parameter Value
Device Type Digital I/O Module for ABB AC 800M/Freelance DCS
I/O Configuration 16 digital inputs (24 V DC), 16 digital outputs (24 V DC, relay type)
Input Signal Type Sink/source configurable, dry contact support
Output Load Capacity 2 A per output channel, 8 A per module (total)
Response Time < 1 ms for input signals, < 2 ms for output switching
Channel Isolation 250 V AC (between channels, channels to ground)
Supported Protocols ABB Industrial Ethernet, Modbus TCP/IP, PROFIBUS DP
Power Supply 24 V DC ±10%, typical power consumption: 0.3 A
Protection Rating IP20 (when mounted in control cabinet)
Operating Temperature -40 °C to +70 °C
Vibration Resistance Complies with IEC 60068-2-6 standard
Compatibility ABB AC 800M controllers, ABB Freelance DCS, ABB Control Builder M software
Warranty Period 3 years

ABB UAC383AE01 HIEE300890R0001

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model ABB UAC383AE01 HIEE300890R0001
Operating Voltage 24V DC (±15% voltage tolerance)
Operating Temperature Range -25°C to +70°C
Signal Type Analog Input (AI) – fully configurable universal type
Analog Input Channels 16 channels (each independently configurable for 4-20mA, 0-10V, thermocouple (Type J/K/T/E/R/S/B), RTD (Pt100/Pt200/Pt500/Pt1000))
Signal Accuracy ±0.015% FS (full scale) for current/voltage; ±0.04% FS for thermocouple/RTD
Input Impedance ≥ 1.5MΩ (voltage input), ≤ 40Ω (current input)
Sampling Rate 250 samples/second per channel
Noise Immunity EN 61000-6-2 (industrial immunity) and EN 61000-6-4 (emission) compliant; built-in signal filtering
Communication Protocols PROFINET, Ethernet/IP, Modbus TCP, ABB AC 800M native protocol
Communication Interface 2 Gigabit Ethernet ports (RJ45), 1 RS-485 port
Power Consumption Maximum 11W under full load
Physical Dimensions 105mm × 85mm × 60mm (L × W × H)
Protection Level IP20 (for control cabinet installation)
MTBF (Mean Time Between Failures) ≥ 220,000 hours
Certifications IEC 61131-2, UL 508C, CE, RoHS, IEC 61010-1, ATEX compliant

ABB UAC326AE01

¥999.00

Product Parameters

Parameter Category Specific Specifications
Brand & Model ABB UAC326AE01
Compatible System ABB AC 800M, ABB Compact Control Builder, ABB Industrial IT Systems
Analog Input Channels 16 Differential Input Channels (Independently Configurable)
Input Signal Types 4-20mA, 0-10V, ±5V, ±10V, Thermocouple (Type J/K/T/E/R/S/B), RTD (Pt100/Pt1000, Ni100)
Signal Conversion Precision 16-bit Resolution (24-bit ADC for Enhanced Accuracy)
Input Impedance ≥1MΩ (Voltage Input); ≤250Ω (Current Input); 3-wire/4-wire RTD Support
Operating Voltage 24VDC ±10%
Operating Temperature Range -25°C to 70°C
Physical Dimensions 102mm × 81mm × 60mm (L×W×H)
Protection Level IP20 (Panel-Mounted)
Mean Time Between Failures (MTBF) ≥200,000 Hours
Certifications CE, UL 508, IEC 61131-2, ISO 9001, EN 61000 (EMC Compliance)
Terminal Type Spring-Clamp Terminals (0.5–2.5mm² Wire Gauge)
Fault Protection Built-in overvoltage, short-circuit, signal loss, and reverse polarity protection
Additional Features DIN Rail Mountable (35mm Standard), LED Channel Status Indicators, Hot-Swappable Design

ABB UAC318AE HIEE300744R0001

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model ABB UAC318AE HIEE300744R0001
Operating Voltage 24V DC (±15% voltage tolerance)
Operating Temperature Range -25°C to +70°C
Signal Type Analog Input (AI) – fully configurable universal type
Analog Input Channels 18 channels (each independently configurable for 4-20mA, 0-10V, thermocouple (Type J/K/T/E/R/S), RTD (Pt100/Pt1000/Ni100))
Signal Accuracy ±0.02% FS (full scale) for current/voltage; ±0.05% FS for thermocouple/RTD
Input Impedance ≥ 1MΩ (voltage input), ≤ 45Ω (current input)
Sampling Rate 150 samples/second per channel
Noise Immunity EN 61000-6-2 (industrial immunity) and EN 61000-6-4 (emission) compliant
Communication Protocols PROFINET, Ethernet/IP, Modbus TCP, ABB AC 800M native protocol
Communication Interface 2 Gigabit Ethernet ports (RJ45), 1 RS-485 port
Power Consumption Maximum 12W under full load
Physical Dimensions 110mm × 85mm × 60mm (L × W × H)
Protection Level IP20 (for control cabinet installation)
MTBF (Mean Time Between Failures) ≥ 210,000 hours
Certifications IEC 61131-2, UL 508C, CE, RoHS, IEC 61010-1, ATEX compliant

ABB UAC317AE HIEE300725R0001

¥999.00

Product Parameters

Parameter Category Specific Specifications
Brand & Model ABB UAC317AE HIEE300725R0001
Compatible Systems ABB AC 800M, ABB Compact Control Builder, ABB Industrial IT Systems
Compatible Auxiliary Modules DS200SDCIG1A, DS200SDCIG2A, DS200SDCIG2B, DS200SHCAG1B, DS200SHCBG1A, DS200SHVIG1A, DS200SHVIG1B, DS200SHVMG1A
Analog Input Channels 8 Differential Input Channels (Configurable)
Input Signal Types 4-20mA, 0-10V, ±5V, Thermocouple (Type J/K/T/E/R/S), RTD (Pt100/Pt1000)
Signal Conversion Precision 16-bit Resolution (Extended Accuracy Mode: 18-bit Effective Resolution)
Input Impedance ≥1MΩ (Voltage Input); ≤250Ω (Current Input)
Operating Voltage 24VDC ±10%
Operating Temperature Range -25°C to 70°C
Physical Dimensions 100mm × 80mm × 60mm (L×W×H)
Protection Level IP20 (Panel-Mounted)
Mean Time Between Failures (MTBF) ≥190,000 Hours
Certifications CE, UL 508, IEC 61131-2, ISO 9001, EN 61000 (EMC Compliance)
Terminal Type Spring-Clamp Terminals (0.5–2.5mm² Wire Gauge)
Fault Protection Built-in overvoltage, short-circuit, and signal loss detection
Additional Features DIN Rail Mountable (35mm Standard), LED Status Indicators, Hot-Swappable

ABB UAC096AE01 HIEE300794R0001

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model ABB UAC096AE01 HIEE300794R0001
Operating Voltage 24V DC (±15% voltage tolerance)
Operating Temperature Range -25°C to +70°C
Signal Type Analog Input (AI) – universal configurable
Analog Input Channels 8 channels (each configurable for 4-20mA, 0-10V, thermocouple (Type J/K/T/E), RTD (Pt100/Pt1000))
Signal Accuracy ±0.02% FS (full scale) for current/voltage; ±0.05% FS for thermocouple/RTD
Input Impedance ≥ 1MΩ (voltage input), ≤ 50Ω (current input)
Sampling Rate 200 samples/second per channel
Noise Immunity EN 61000-6-2 industrial immunity standard compliant
Communication Protocols PROFINET, Ethernet/IP, Modbus TCP, ABB AC 800M native protocol
Communication Interface 1 Gigabit Ethernet port (RJ45), 1 RS-485 port
Power Consumption Maximum 9W under full load
Physical Dimensions 95mm × 80mm × 60mm (L × W × H)
Protection Level IP20 (for control cabinet installation)
MTBF (Mean Time Between Failures) ≥ 200,000 hours
Certifications IEC 61131-2, UL 508C, CE, RoHS, IEC 61010-1 compliant

ABB UAA326A04 HIEE300024R4

¥999.00

Product Parameters

Parameter Category Specification Details
Brand & Model ABB TU8302
Signal Handling Voltage Up to 250V AC / 60V DC
Operating Temperature Range -25°C to +70°C
Core Functions Wiring termination, signal distribution, PLC module docking, surge protection, fault isolation
Terminal Type Screw-clamp terminals (tinned copper alloy, anti-corrosion, anti-loosening locking mechanism)
Terminal Quantity 60 terminals (quadruple-row layout, 15 per row)
Maximum Current per Terminal 20A (continuous load)
Wire Cross-Section Range 0.5mm² – 4mm² (solid/stranded wire, ferrule-compatible)
Compatibility ABB AC 800M I/O modules, ABB safety relay modules, third-party standard PLC units, 35mm DIN rails
Built-In Protection Varistor surge protection (up to 2.5kV), flame-retardant housing (UL94 V-0), short-circuit resistant terminals
Physical Dimensions 130mm × 85mm × 38mm (L × W × H)
Housing Material Reinforced flame-retardant polycarbonate, stainless steel mounting bracket
MTBF (Mean Time Between Failures) ≥ 230,000 hours
Certifications IEC 60947-1, UL 1059, CE, RoHS, IEC 61131-2 compliant