Parameters and specifications
Main system CPU: Industrial Cortex-A8 embedded microprocessor, 720MHz
RAM: 512MB DDR2 SDRAM
Flash: 1GB NAND Flash
USB: High-speed USB2.0 Host, support SD memory card expansion
Network interface: LAN 10/100/1000Mbps adaptive, support IEEE1588 precision clock protocol
Isolation protection: 15KV air discharge and 8KV contact discharge protection
Serial interface: RS232/RS485, 15KV ESD protection
CAN interface: 2.5KV optical insulation CAN2.0A/B compatible
Display interface: Standard VGA interface, resolution up to 1280×854 (WXGA)
Digital input/output: dry node and wet node support, relay output, Type C relay
Analog input/output: 12-bit single-ended input (analog input), 16-bit output (analog output)
Output voltage: 24VDC (according to some search results)
Operating temperature range: -40℃ ~ +85℃ (according to some search results)
Electrical safety: in accordance with UL508, IEC/EN 61131-2 standards, hazard classification position in accordance with UL/CSA 60079-15
Size and weight
Size: Net length 127.5 mm, net height 185 mm, net width 59 mm
Weight: Net weight 0.62 kg
Parameters and specifications
Processor: 32-bit RISC processor
Main frequency: up to 200 MHz
Power supply voltage: 24V DC (according to multiple information in search results)
Power consumption: 20W (according to one search result), but another mentions 120W, which may refer to a different model or configuration.
Operating temperature: -25°C to +70°C (according to one search result), but another search result mentions -10 °C to +50 °C, which may be due to differences between different versions or application environments.
Storage temperature: -40°C to +85°C
Communication interface: RS232, RS485, Ethernet
I/O points: up to 256 points
Protection level: IP67
Size and weight
Dimensions: 225 mm x 165 mm x 80 mm
Weight: 2.5kg
Parameters and specifications
Rated excitation current: 10 ADC
Rated voltage: 350 VDC
Processor: 32-bit RISC processor up to 200 MHz
I/O points: up to 256 points
Communication interface: Support RS232, RS485, Ethernet and other interfaces
Power supply voltage: 24V DC
Power consumption: 20W
Operating temperature range:
-25°C to +70°C (some data shows -20°C to +50°C)
Storage temperature: -40°C to +85°C
Size and weight
Size:
Approximately 225 mm x 165 mm x 80 mm (one way to say it)
230mm x 140mm x 200mm (another word)
170mm x 105mm x 32mm
Weight:
About 2.5 kg (one way to say it)
15 kg
About 120g
Parameters and specifications
Model: REF615 HBFEAEAGNDA1ABA1XG
Brand: ABB
Voltage: 24V (according to one of the search results)
Weight: 2KG (again according to one of the search results)
Application fields: Widely used in power, water conservancy, transportation, petroleum, chemical, coal, power supply bureau distribution network, data center, shopping malls, schools, hospitals, new energy and other industries
Parameters and specifications
Operating voltage: 24V DC, it is also said that the input voltage range is 12-48VDC, and the output voltage range is 5VDC, but this statement may be related to the specific application scenario.
Power: 5W.
Temperature range: -40 ° C to 85 ° C, indicating that the module can work normally in a wide temperature range.
Protection rating: IP65, indicating that the module has a high degree of dust and water resistance.
Current: It is said that the current is 100-400A, but considering that this is a voltage measurement module, this current range may be related to the power supply or load of the module, rather than the current parameters of the module itself.
Size and weight
Size: Some say it is 10cm x 10cm x 10cm, another say is 170mm x 105mm x 32mm, and the weight is about 120g. However, there are also claims that the weight is 0.5kg or 2KG.
Parameters and specifications
Model: REF615C-D
Brand: ABB (sometimes referred to as GE, but according to most information, this is an ABB product)
Applications: Usually used in power systems, including power substations, power distribution, power quality monitoring, motor protection and equipment protection.
Functions: With current and voltage monitoring, overcurrent and overvoltage protection, fault detection, automatic reclosing and communication interface functions.
Communication protocols: Support IEC 61850, Modbus and other communication protocols, easy to communicate with other devices and monitoring systems.
Parameters and specifications
Bus consumption current: 80mA
Total power consumption: 3W
Number of input points: 10
Rated voltage: 24V DC
Continuous allowable voltage: 30V DC
Surge voltage: 35V DC, 0.5s
Logic “0” voltage range: 5V DC, 1mA
Logic “1” voltage range: 15V DC, 1mA
Input delay: 4.5ms
Signal input type: PNP/NPN photoelectric isolation
Cable length (shielded) : 500M
Cable length (unshielded) : 300M
Number of output points: 6
Output voltage: 24V DC or 250V AC
Rated current: 2.0A
Rated current of common end: 10A
PPC905AE101 Current: 5A, 4s@10% duty cycle
Parameters and specifications
Power supply voltage: 24V DC
Rated current: 5A
Maximum current: 10A
Output power: There are 120W and 360W two versions, may vary depending on the configuration or model
Response frequency: 500Hz
Accuracy: ±0.05%FS
Operating temperature range: -25~70℃
Maximum output current: Maximum 5mA per channel
Size and weight
Size: Different sources give different size information. Some say it is 8.0 inches x 2.0 inches x 13.0 inches (20.3 cm x 5.1 cm x 33.0 cm), while others say it is 96mm x 48mm x 16mm.
Parameters and specifications
Model: SDSS-CON-4
Brand: ABB
Product Type: Programmable Logic Controller (PLC)
Switch quantity: up to 40 in 40 out, analog quantity up to 8 in 4 out
Working voltage: 24VDC
Voltage range: The voltage is 24V and the current range may be from 100A to 400A
Rated frequency: 60HZ
Operating temperature: -20°C to 60°C
Storage temperature: -40°C to 85°C
Humidity: 5% to 95% non-condensing
Size and weight
Size: There is a variety of size information, such as 210mm x 95mm x 25mm, 2859036mm, and 100*100mm.
Parameters and specifications
Function: REM610 provides a variety of protection functions, such as three-phase thermal overload protection, three-phase overcurrent protection, three-phase short-circuit protection, non-directional ground fault protection, three-phase unbalance protection, reverse phase protection, etc.
Communication capability: Support to connect to the control and monitoring system through the serial communication bus to achieve remote control. Local control is possible from a computer connected to a front-end communication port.
Human interface: Includes a liquid crystal display (LCD) and navigation buttons to make local use of the relay safe and easy.
Power supply: The supply voltage is usually 100-240 V AC.
Parameters and specifications
Model: CI532V05 3BSE007297R1
Brand: ABB
Product type: controller or interface card module
Functions: Control and monitor various equipment and systems in industrial processes to achieve automated control and data acquisition
dimension
Product net depth/length: 140 mm
Product height: 30 mm
Net width: 360 mm
Parameters and specifications
REM615 HBMCAEAGANB6ANN1XG is a powerful motor protection measurement and control device, mainly used in manufacturing and processing industry asynchronous motor protection, control, measurement and monitoring.
Standard configuration: The unit comes in four standard configurations that cover all basic motor protection functions, voltage protection functions, and power and energy measurements.
Communication standards: Multiple communication standards are supported, including the substation IEC61850 communication standard, Parallel Redundancy Protocol (PRP), and High Availability Seamless Redundancy Protocol (HSR). It also supports DNP3, IEC 60870-5-103 and ModbusR protocols, and Profitbus DPV1 protocols by using the SPA-ZC 302 protocol adapter device.
