Grid view List view

Showing 409–420 of 487 results

NI PXI-6683

¥4,260.00
The NI PXI-6683 is a high-performance synchronization module designed for PXI and PXI Express systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Synchronization Sources: The NI PXI-6683 can synchronize with GPS, IEEE 1588 (also known as Precision Time Protocol or PTP), IRIG-B, and PPS (Pulse Per Second) signals.
Clock Source: It has a board-mounted Temperature-Compensated Crystal Oscillator (TCXO) that can be disciplined to any of the synchronization sources mentioned above for long-term stability.
Trigger Routing: The module can route clock signals and triggers with low skew within a PXI chassis or across multiple chassis.
Timing Accuracy: With its ability to synchronize to precision time sources, the PXI-6683 can significantly improve measurement accuracy and trigger precision.
Dimensions and Weight:
Dimensions: The NI PXI-6683 measures approximately 6.3 inches x 3.9 inches (length x width).
Weight: The weight of the module is not explicitly provided in the available references. However, it is likely to be within the standard weight range for a PXI module.

NI PXI-6052E

¥5,124.00
The NI PXI-6052E is a multifunctional data acquisition (DAQ) device that offers a wide range of capabilities for various industrial and research applications. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Resolution: The NI PXI-6052E provides a 16-bit resolution, which ensures accurate data acquisition.
Sampling Rate: It offers a maximum sampling rate of up to 1.25 MS/s per channel. However, please note that depending on the configuration and the number of channels used, the sampling rate may vary.
Channels: This device has 16 analog inputs, 2 analog outputs, and 24 digital I/O lines. Some references also mention 8 analog inputs and 8 DIO channels, which might refer to different configurations or model variants.
Input Range: The analog input range is ±10v.
Input and Output Impedance: The input impedance is 1mohm with 25pf, and the output impedance is 50 ohms.
Counters and Timers: It is equipped with two counters/timers.
Compatibility: The NI PXI-6052E is compatible with various software development environments (ADE) such as LabVIEW, Visual Basic, C#, and C/C++.
Dimensions and Weight:
Exact dimensions and weight for the NI PXI-6052E are not provided in the available references. However, since it is a PXI module, it is likely to conform to the standard dimensions of a PXI card, which are typically defined by the PXI specification.
Series:
The NI PXI-6052E belongs to the National Instruments’ PXI series of modular instrumentation devices.

NI PXI-6052E

¥5,268.00
NI PXI-6052E Parameters, Specifications, Dimensions, Weight, Series, Features, and Applications in English
Parameters and Specifications:
The NI PXI-6052E is a multifunctional data acquisition (DAQ) device that offers high-performance data collection capabilities. Key specifications include:
Analog Inputs: 16 single-ended inputs or 8 differential inputs.
Analog Outputs: 2 outputs.
Digital I/O Lines: 24 digital I/O lines.
Counters/Timers: 2 counters/timers.
Resolution: 16 bits.
Maximum Sampling Rate: Up to 1.25 MS/s per channel.
Input Voltage Range: ±10v.
Output Voltage Range: ±10v.
Dimensions and Weight:
The exact dimensions and weight of the NI PXI-6052E may vary slightly depending on the manufacturer and any accessories included. However, it is typically designed to fit within standard PXI chassis dimensions. For precise measurements, it is recommended to consult the manufacturer’s official documentation.

NI PXI-6115

¥2,650.00
The NI PXI-6115 is a high-performance multifunction I/O module designed for PXI-based systems. It offers a comprehensive set of features that cater to various industrial and research applications. Here are the key parameters, specifications, dimensions, weight, series, features, and functions of the NI PXI-6115 in English:
Parameters and Specifications:
Analog Input: The module provides 4 channels of analog input with 12-bit resolution and a sampling speed of up to 10 MS/s per channel.
Analog Output: It offers 2 channels of analog output with 12-bit resolution and a maximum output rate of 4 MS/s for a single channel and 2.5 MS/s for dual channels.
Digital I/O: The module includes 8 lines of digital I/O with a timing rate of 10 MS/s.
Counters/Timers: It features 2 counters/timers with 24-bit resolution.
Dimensions and Weight:
The specific dimensions and weight of the NI PXI-6115 may vary, but it is typically designed to fit standard PXI slots. It is advisable to consult the official product documentation for precise measurements.
Series:
The NI PXI-6115 belongs to the NI PXI series of multifunction I/O modules.

NI PXI-6052E

¥5,326.00
The NI PXI-6052E is a multifunctional data acquisition (DAQ) device that offers a wide range of capabilities for various applications. Here’s a summary of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Resolution: The NI PXI-6052E provides a high resolution of 16 bits.
Sampling Rate: It offers a maximum sampling rate of up to 333 kS/s for 16 single-ended analog inputs.
Channels: It features 16 analog inputs, 2 analog outputs, 8 digital I/O (DIO) lines, and 2 counters/timers.
Input Voltage Range: ±10v.
Output Voltage Range: ±10v.
Input Impedance: 1mohm / 25pf.
Output Impedance: 50 ohms.
Digital I/O Voltage Level: TTL/CMOS.
Dimensions and Weight:
The exact dimensions and weight of the NI PXI-6052E are not provided in the search results. These specifications can vary depending on the manufacturer’s updates and product variations. It is recommended to refer to the official documentation or contact the manufacturer for accurate dimensions and weight information.

NI PXI-8461

¥2,360.00
Regarding parameters, specifications, dimensions, weight, series, features and functions of NI PXI-8461, I can provide the following information:
Parameters and specifications:
Model: NI PXI-8461.
Brand: National Instruments (NI)
Function: Support NI-CAN, is a 2-port high-speed PXI CAN interface module.
Voltage range: The input range is usually voltage -10 volts to +10 volts and current 4 to 20 MA.
Accuracy: Calibrated equipment has a high degree of accuracy.
Size and weight:
Size: 100mm x 50mm x 20mm.
Weight: The exact weight may vary from batch to batch and specific configuration, but in general, it may weigh about 1kg.

NI PXIE-6556

¥6,235.00
The NI PXIE-6556 is a high-performance digital waveform generator and analyzer designed for various testing and measurement applications. Here is a breakdown of its key parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Channels: The NI PXIE-6556 has 24 single-ended digital pins, allowing for multi-channel testing and measurement capabilities.
Clock Rate: It boasts a maximum clock rate of 200 MHz, enabling high-speed digital waveform generation and analysis.
Voltage Range: The voltage level range is -2 V to 7 V or -1 V to 7 V, providing flexibility for different testing scenarios.
Memory: Depending on the part number (781949-02 or 781949-01), each channel can have either 64 MB or 8 MB of memory.
Data Rate: The maximum data transmission rate is 200 Mbps, ensuring efficient data transfer.
Dimensions and Weight:
The device has a weight of approximately 28 ounces.
Its dimensions are 21.6 x 2.0 x 13.0 centimeters.
Series:
The NI PXIE-6556 belongs to the PXI Express (PXIe) series of modules designed for modular instrumentation and test systems

NI SCXI-1180

¥2,650.00
The NI SCXI-1180 is a modular signal conditioning device designed for use in data acquisition and control systems. Here’s a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters:
The SCXI-1180 offers high-precision signal conditioning capabilities, ensuring accurate data acquisition.
It supports a wide range of input signals, including analog and digital signals, making it suitable for various applications.
Specifications:
The module provides various signal conditioning functions such as amplification, filtering, and isolation.
It is compatible with National Instruments’ data acquisition hardware and software, allowing seamless integration into NI-based systems.
Dimensions and Weight:
The dimensions of the SCXI-1180 module are approximately 1.2×6.8×8.0 inches.
The exact weight of the module is not specifically mentioned, but it is typically lightweight for easy installation and portability.

NI SCXI-1302

¥2,065.00
The NI SCXI-1302 is a modular hardware component designed for signal conditioning and measurement applications. Here’s a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters:
The SCXI-1302 typically operates within a voltage range of 24VDC.
It is capable of handling input and output signals, with specified digital input and output counts.
Specifications:
The input voltage range of the SCXI-1302 is 10vdc to 30vdc, while the output voltage range is also 10vdc to 30vdc.
The input current is 5mA, and the output current per channel is 500mA.
Dimensions and Weight:
The dimensions of the SCXI-1302 are approximately 12.7cm x 8.9cm x 2.5cm.
The weight of the module is 2KG.
Series:
The NI SCXI-1302 belongs to the SCXI series of modular signal conditioning devices from National Instruments.

NI SCXI-1180

¥6,205.00
The NI SCXI-1180 is a modular signal conditioning device designed for use in data acquisition and control systems. Here’s a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters:
The SCXI-1180 offers high-precision signal conditioning capabilities, ensuring accurate data acquisition.
It supports a wide range of input signals, including analog and digital signals, making it suitable for various applications.
Specifications:
The module provides various signal conditioning functions such as amplification, filtering, and isolation.
It is compatible with National Instruments’ data acquisition hardware and software, allowing seamless integration into NI-based systems.
Dimensions and Weight:
The dimensions of the SCXI-1180 module are approximately 1.2×6.8×8.0 inches.
The exact weight of the module is not specifically mentioned, but it is typically lightweight for easy installation and portability.

NI GPIB-140A 186135G-01

¥3,412.00
NI GPIB-140A 186135G-01 is a high-performance data acquisition module produced by National Instruments. It is designed to communicate with various instruments and devices using the GPIB (General Purpose Interface Bus) interface, enabling data acquisition and control tasks in a wide range of applications. Here’s a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Interface: The module uses the GPIB interface for communication with instruments and devices.
Data Transmission Rate: It supports high-speed data transmission, exceeding 1.1 Mbytes/s (IEEE 488.1) or 2.8 Mbyte/s (HS488), suitable for real-time data acquisition and control applications.
Device Connectivity: The module allows connection of up to 26 GPIB devices, significantly expanding the system’s capacity.
Dimensions and Weight:
Exact dimensions are not provided in the available information, but it is typically designed to fit standard rack mount systems.
Weight: The approximate weight is not specifically mentioned, but it should be within a reasonable range for a module of its type.

NI USB-6525

¥6,231.00
The NI USB-6525 is a high-performance digital I/O device designed for a range of applications in industrial automation, testing, measurement, and scientific research. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Input Voltage Range: ±10V
Input Impedance: 1Mohm
Input Coupling: AC/DC
Input Types: Single-ended, differential, or pseudo-differential
Digital I/O Voltage Range: 0 to 5V
Counter/Timer Resolution: 32-bit
Counter/Timer Frequency Range: 0.1 Hz to 10 MHz
Maximum Sampling Rate: 1.25 MS/s
Temperature Range: -40°C to 85°C
Dimensions and Weight:
Specific dimensions and weight for the NI USB-6525 are not provided in the available search results. These details may vary depending on the specific model and its packaging. It is advisable to consult the official NI documentation or contact a sales representative for precise measurements.