- processor : uses Xilinx Zynq-9607 reconfigurable FPGA, has a dual-core processor
- memory : 512 MB of non-volatile memory and volatile memory (DRAM)
- Processor speed : up to 667 MHz
-I/O interface : provides a RIO Mezzanine Card (RMC) connector, has 96 single-ended digital input/output lines
- size : the overall size is about 16.3cm×19.6cm×20.6cm
- Weight : 2.3kg
Package form: PXIe.
Analog input impedance: 50 Ω, 1 MΩ.
Analog input voltage range: -15 V to 15 V.
Input voltage range: 12-48VDC.
Output voltage range: 5VDC.
Output current: Max. 10A.
Dimensions: 170mm x 105mm x 32mm.
Weight: About 120g.
Number of channels:
Analog input: 16 channels
Analog output: 2 channels
Digital I/O lines: 24 (8 of which are 1 MHz hardware timing lines)
Counter/timer: 4-channel 32-bit
Sample rate:
Analog input: 250 kS/s
Analog output: 900 kS/s
Because the specific uses and application scenarios of CFP-180 may be different, its characteristics will also be different. In general, products related to hydraulic pumping may have the following characteristics:
High pressure output: Used to generate enough pressure to drive equipment or tools in a hydraulic system.
Portability: May be designed to be easy to carry and move around to suit different workplaces.
Durability: Since hydraulic tools are often used in heavy industry and construction, they need to be durable enough to withstand harsh working environments and heavy loads.
Manufacturer: National Instruments (NI)
Function: Mainly used for analog signal acquisition. It can receive signals from sensors, instruments, or other analog sources, digitize them, and pass the data to a computer for analysis and recording
Applications: Commonly used in scientific research, engineering testing, laboratory measurement and other applications requiring high-precision data acquisition
Input channels: Usually equipped with multiple analog input channels, can receive a variety of different types of analog signals, such as voltage, current, temperature, etc
Voltage: Depending on some search results, the operating voltage may be 24V or 220V, but please note that this depends on the specific application and configuration
Current: Some search results mention that the current range may be 100-400A, but this may also vary by application
Output frequency: In some applications, the output frequency may be 50Hz or 350kHz
Brand: National Instruments (NI)
Communication mode: The CFP-1808 controller communicates via EtherNet/IP and includes a variety of embedded communication options such as a USB programming port, a non-isolated serial port, and an Ethernet port
Maximum transfer rate: 1.5 MB/s
GPIB address: 0-30
Power requirements: 100-240 VAC, 50/60 Hz
Power supply voltage: 24V
Power supply current: 240mA
Processor speed: 6
Size: There are two different size information. One is 22.2cm x 14.5cm x 5.1cm, and the other is 12x16x19 (units are unclear, may be cm or inches).
Weight: There are two different types of weight information. One is 1.2kg, the other is 0.89kg4 and 2KG
Processor: Xilinx Zynq-7020 SoC (some sources indicate that it may also be Zynq-9607 reconfigurable FPGA), with high processing power.
Memory: DDR3 SDRAM with 512 MB serves as volatile memory, as well as non-volatile memory, providing ample storage space for a variety of applications.
Communication ports: including two Gigabit Ethernet ports, one USB port, and one RS232 serial port.
I/O interface: Provides 40 FPGA universal I/O pins, 2 FPGA high-speed serial interfaces, 4 FPGA differential ADC interfaces and 4 FPGA differential DAC interfaces.
Number of channels: 32 channels.
Switch type: SPST (single pole single throw).
Frequency range: DC to 3GHz or possibly up to 500MHz.
Maximum switching speed: 100 times/SEC.
Rated current: 1A.
Maximum power: 15W.
Operating temperature: recommended from 0°C to 50°C, storage from -20°C to 70°C, non-condensing humidity from 5% to 85%.
Dimensions: 1.2 x 6.8 x 7.8 inches (30 x 173 x 198 mm).
Number of channels: Usually 16 differential input channels are used to measure various signal types. There are also specific models such as the SCXI-1104C voltage input module with 32 differential channels.
Resolution: Provides a 24-bit analog-to-digital converter to ensure high precision data acquisition.
Sampling rate: The maximum sampling rate is 100 kS/s, but the specific rate may vary according to application requirements. The module usually has an adjustable sampling rate to meet the needs of different applications.
Input voltage range: ±10 V, suitable for a variety of common signal types and voltage standards.
Input impedance: 1 MΩ || 5 pF to ensure stable signal transmission.
The processor core. It uses a 2.6GHz or 2.7GHz dual-core or 2.6GHz quad-core Intel Core i7 5700EQ processor.
Memory. The standard configuration is 4GB single-channel 1600 MHz DDR3L RAM, expandable up to 8GB.
Save. Integrated hard drive provides stable storage space.
Interface. Features two 10/100/1000BASE-TX (gigabit) Ethernet ports, two USB 3.0 ports, and four USB 2.0 ports.
Control function. The controller has powerful control functions and is suitable for a variety of applications.
The operating system. Supports Windows 7 64-bit operating system.
Bandwidth. The maximum bandwidth is 8GB/s and the minimum bandwidth is 132MB/s.
Product Description: The device is a high-performance and reliable data acquisition device, which is suitable for various application scenarios requiring high-precision and high-speed data acquisition.
Parameters: Has 16 analog inputs, 2 analog outputs, 8 digital I/O (DIO) lines, and two 24-bit counters/timers. It has a sampling rate of up to 333 kS/s and a resolution of 16 bits.
Size: 6.3 x 3.9 inches, weight 7.2 ounces.
Features: no switch, no jumper design, easy to use. It can be configured and programmed using the NI-DAQ 6052 driver software.
Functions and uses: To achieve accurate and reliable data acquisition, suitable for applications requiring high-speed and high-precision data acquisition, such as industrial automation, test and measurement, scientific research experiments, etc.