Grid view List view

Showing 337–348 of 472 results

PXI-5402

¥5,126.00
Parameters and specifications:
Type: PXI module
Features:
16-bit analog output module
Single channel arbitrary waveform generator, support orthodox wave, triangular wave, square wave and other custom waveform output
Number of channels:
2 channels (in some descriptions)
1 channel (in some descriptions)
Resolution:
16-bit (as analog output module)
14 bits (as waveform generator)
Output range: ±10V
Maximum update rate:
2MS/s

NI-9174

¥5,262.00
Parameters:
Analog inputs: up to 16 differential or 32 single-ended channels.
Analog output: up to 4 channels.
Digital I/O: 24 lines (8 inputs, 8 outputs, and 8 bidirectional lines).
Counters: Two 32-bit counters.
Resolution: 24-bit analog input and output.
Sampling rate: Analog input channels up to 250 kS/s.

PXI-8461

¥6,235.00
Parameters and specifications
Interface: Up to 8 different high-speed CAN bus interfaces are supported.
Protocol: Supports a variety of different CAN communication protocols.
Data transfer rate: Maximum 1 Mbps.
Operating temperature range: 0°C to 55°C.
Power supply requirements: +3.3 VDC, +5 VDC, +12 VDC, -12 VDC.
Input range: Voltage: -10 V to +10 V; Current: 4 to 20 mA.

CFP-AO-200

¥6,235.00
Parameters and specifications
Brand: National Instruments (NI)
Model: CFP-AO-200
Type: Analog current input module
Number of channels: 8 channels (8 analog current input channels may be available depending on the search results)
Resolution: 32-bit (resolution mentioned in specific search results)
Communication mode: Support EtherNet/IP communication, including a variety of embedded communication options, such as USB programming port, non-isolated serial port and Ethernet port
Driver software: ni-daq

SCXI-1313A

¥4,263.00

Parameters and specifications:

Communication capability: Each block has its own communication capability and microprocessor.
Circuit connections: 6 to 32 circuits are provided to connect input and output devices.
Voltage measurement range: Each SCXI-1313A channel features an accurate 100:1 resistive voltage divider that can be used to measure voltages up to 150 Vrms or ±150 VDC.

SCXI-1104C

¥6,250.00

Parameters and specifications:

Number of channels: Usually 16 differential input channels or 32 single-ended input channels, allowing multiple signals to be collected simultaneously.
Resolution: 24-bit analog-to-digital converter provides high precision data acquisition.
Sampling rate: The maximum sampling rate is 100 kS/s, but the specific rate may vary according to application requirements.
Input voltage range: ±10 V, suitable for a variety of common signal types and voltage standards.
Input impedance: 1 MΩ || 5 pF to ensure stable signal transmission.

SCXI-1104C

¥6,238.00
Parameters and specifications:
Number of channels: Multiple channels are supported, typically 32 single-ended or 16 differential input channels.
Resolution: A high-resolution ADC that provides highly accurate data acquisition.
Sampling rate: Depends on the specific model and application requirements.
Input voltage range: ±10 V, suitable for a variety of common signal types and voltage standards.
Input impedance: 1 MΩ || 5 pF to ensure stable signal transmission.
Interface: Support a variety of interface options, such as USB, PCI, PXI and Ethernet, easy to connect with the computer or control system.

PCI-6254

¥5,214.00
Parameters and specifications:
Input channels: The PCI-6254 has 32 single-ended or 16 differential analog input channels with a 16-bit resolution and a maximum sampling rate of 1.25 MS/s.
Digital I/O: Provides 48 digital I/ OS.
Counter/timer: Has 2 32-bit counter/timer I/O lines at 80 MHz.
Analog input maximum operating voltage: ±11 V, this range is suitable for signal mode and common mode.
Sampling rate: The maximum sampling rate per channel is 1.25 MS/s, and the maximum average sampling rate for multiple channels is 1 MS/s.
Size and weight:
Dimensions: 3.8 x 6.1 inches.
Weight: 5.3 ounces.

PCIE-6351

¥6,235.00
Parameters and specifications:
Number of analog input channels: 16 (16-bit, 1.25 MS/s)
Number of analog output channels: 2 (2.86MS /s)
Number of two-way digital channels: 24
Number of counters/timers: 4 32-bit
Analog input resolution: 16 bits
Analog input absolute accuracy: 1520μv
Maximum number of input channels for differential simulation: 8
Analog input fifo cache size: 2047 sample
Maximum number of single-end analog input channels: 16
Bus connector: PCI Express
Maximum update rate: 2.86ms /s
Analog output maximum sampling rate: 1.25 ms/s
Power input: bus power supply

NI SCXI-1162HV

¥5,623.00
Parameters and specifications:
Main function: Detect a variety of AC or DC signals, from digital logic level signals to 240VAC/VDC signals.
Technical specifications:
Applicable to SCXI system.
It has optical isolation to avoid ground loop problems and protect the host computer from excessive voltage damage.
It can detect a wide range, including digital logic level signals up to 240VAC/VDC signals.
Serial programming can be done on DAQ devices via the SCXI bus, making it easy to integrate into existing SCXI systems.
Supports work in parallel mode when directly connected to digital I/O devices.

NI NI-9505

¥3,651.00

Parameters and Specifications:

  • Type: Digital I/O Module
  • Channels: 32 Digital I/O Channels
  • Isolation: Channel-to-channel and channel-to-ground isolation
  • Voltage Rating: 30 VDC (Maximum)
  • Current Rating: 10 mA per channel (Maximum)

Dimensions and Weight:

  • Dimensions: Varies depending on mounting hardware. Typically compact for panel mounting.
  • Weight: Lightweight, suitable for panel mounting applications.

NI SCXI-1162HV

¥6,032.00
Parameters and specifications:
Function: Detect a variety of AC or DC signals, from digital logic level signals to 240VAC/VDC signals.
Technical specifications:
Applicable to SCXI system.
It has optical isolation to avoid ground loop problems and protect the host computer from excessive voltage damage.
It can detect a wide range, including digital logic level signals up to 240VAC/VDC signals.
Serial programming via SCXI bus.
Supports work in parallel mode when directly connected to digital I/O devices.
Size: Approximately 13.4 x 5.0 inches (as described in the search results [2], but please note that this may not be the exact size).
Resolution: 32 bits.