Grid view List view

Showing 385–396 of 472 results

NI PCI-8517

¥6,660.00

The NI PCI-8517 is a PCI bus CAN interface card produced by National Instruments. It is designed for communication between computers and CAN buses1. Here are the parameters, specifications, dimensions, weight, series, features, and functions of the NI PCI-8517 in English:

Parameters and Specifications:

  • Bus Interface: PCI bus.
  • Interface Type: CAN.
  • Compatibility: For use with computers to enable communication with CAN buses.

Dimensions and Weight:

  • There are slight variations in the reported dimensions and weight. One source indicates dimensions of 168.4 mm x 111.2 mm x 20 mm (or 20.3 mm) and a weight of 136 grams1. Another source lists dimensions as 167.64 mm x 111.15 mm and a weight of 0.18 kilograms2.

Series:

  • The NI PCI-8517 belongs to the series of National Instruments’ PCI bus interface cards.

NI PCI-7813R

¥4,122.00

The NI PCI-7813R is a high-performance data acquisition card from National Instruments. Below are its key parameters, specifications, dimensions, weight, series, features, and applications described in English:

Parameters and Specifications:

  • Channels: The card provides 8 analog input channels, capable of differential or single-ended input1.
  • Resolution: 24-bit resolution for analog inputs1.
  • Maximum Sampling Rate: Each channel can sample at up to 500 ks/s1.
  • Input/Output Voltage Range: ±10v for both input and output1.
  • Bus Interface: PCI1.
  • Digital I/O Lines: 60 lines, configurable as input, output, timers, or custom logic2.
  • FPGA: Features a Virtex-II 3 million-gate FPGA that can be programmed using LabVIEW FPGA modules23.

Dimensions and Weight:

  • Dimensions: Exact dimensions may vary slightly depending on the packaging and accessories. However, a general industrial card size can be expected.
  • Weight: Typically, a card like NI PCI-7813R would weigh several hundred grams, but the exact weight is not specified in the references.

NI PXIE-8861

¥4,521.00
The NI PXIE-8861 is a high-performance embedded controller specifically designed for PXI (PCIe Extensions for Instrumentation) systems. It offers a robust set of features and specifications that make it suitable for various applications in testing, measurement, and automation. Here is a summary of its key parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters & Specifications:
Processor: The NI PXIE-8861 is powered by a high-performance Intel Xeon E3-1515 processor, providing excellent computational capabilities for processor-intensive tasks.
Memory & Storage: It includes ample memory and integrated hard drive for storing and processing data efficiently.
I/O Connectivity: The controller boasts a comprehensive set of I/O ports, including Thunderbolt 3.0, Display, USB 3.0, USB 4, and Ethernet ports, as well as serial and GPIB interfaces. This ensures seamless connectivity and communication with external devices.

NI PXIE-6739

¥6,028.00
NI PXIE-6739 is a high-density analog output module designed for PXI systems. Here is a summary of its key parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters & Specifications:
Channels: NI PXIE-6739 offers 64 channels of analog output, making it suitable for applications requiring high sampling rates and large numbers of channels.
Resolution & Sample Rate: It provides 16-bit resolution and a maximum sample rate, allowing for precise and accurate analog output signals.
Voltage Output: The module supports static and software-timed voltage output applications, enabling it to generate a wide range of analog signals.
Dimensions & Weight:
Dimensions: The NI PXIE-6739 has a compact size, with dimensions of approximately 10.6 cm × 9.3 cm × 2.3 cm.
Weight: The exact weight may vary slightly, but it is generally lightweight and suitable for use in testing and measurement systems.
Series:
The NI PXIE-6739 belongs to the National Instruments’ (NI) series of high-performance PXI modules designed for various testing, measurement, and automation applications.

NI PXIE-8523

¥5,455.00
NI PXIE-8523 is a high-performance automotive Ethernet interface module designed for testing and measurement applications. Here is a summary of its key parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters & Specifications:
Processor: NI PXIE-8523 typically incorporates a powerful processor, providing fast data processing and analysis capabilities.
Memory: It offers ample memory to ensure efficient execution of complex testing and measurement tasks.
Storage: The module features built-in hard drives or solid-state drives for storing test results, configuration files, and application programs.
Features:
High-Speed Connectivity: The module supports automotive Ethernet standards, enabling high-speed data transmission between devices within the vehicle network.

NI SCXI-1104C

¥2,035.00
The NI SCXI-1104C is a high-performance data acquisition module from National Instruments (NI) that offers reliable and precise data collection for various scientific and industrial applications. Here is a detailed overview of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters & Specifications:
Channels: It has a differential input channel count of 16 (or 32, depending on the specific model).
Sampling Rate: The maximum sampling rate is 100 kS/s (for the 16-channel model).
Resolution: The module offers a resolution of 24 bits, ensuring high-precision data acquisition.
Input Voltage Range: ±10 V.
Input Impedance: 1 MΩ || 5 pF.
Dimensions & Weight:
Dimensions: 3.3 x 22.9 x 14.0 cm.
Weight: 0.36 kg.

NI SCXI-1349

¥5,480.00
The NI SCXI-1349 is a module from National Instruments that offers high-performance analog and digital I/O capabilities for various automation and control applications. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters:
Analog Input Channels: 32 channels.
Analog Output Channels: 4 channels.
Digital I/O Channels: 8 channels.
Maximum Sampling Rate: 1ms/s.
Resolution: 16 bits.
Specifications:
Communication Interface: USB.
Power Requirements: 5v DC, 500ma.
Operating Temperature: 0 ~ 40℃.
Dimensions: 9.5″ x 5.5″ x 2.0″ (approx.).
Weight: 1.5 pounds (approx.).

NI SCXI-1125

¥5,416.00
The NI SCXI-1125 is a data acquisition module produced by National Instruments (NI) that offers high-performance measurement capabilities for various industrial and research applications. Here’s a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters:
Measurement Type: Differential or single-ended thermocouple input.
Channel Count: 8 differential or 16 single-ended input channels.
Accuracy: ±0.5°C for J, K, T, E types, ±1.0°C for R, S, N, B types.
Specifications:
Isolation Voltage: 1000 Vrms for measurement safety and data integrity.
Cold Junction Compensation: Built-in circuit for accurate temperature measurements.
Dimensions & Weight:
Dimensions: 3.78 cm x 12.19 cm x 20.32 cm.
Weight: 454 grams. However, some sources also mention a weight of approximately 1.2 kg. This difference might be due to different configurations or measurement conditions.

NI SCXI-1125

¥6,412.00
The NI SCXI-1125 is a data acquisition module produced by National Instruments (NI) that is widely used in industrial automation and control systems. Below is a summary of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters:
Model Number: SCXI-1125
Manufacturer: National Instruments (NI)
Specifications:
Functionality: The NI SCXI-1125 is designed for measuring and recording temperature values from multiple temperature sensors. It supports 8 differential or 16 single-ended thermocouple input channels.
Isolation Voltage: Features a high isolation voltage of up to 1000 Vrms, ensuring measurement safety and data integrity.
Accuracy: ±0.5°C for types J, K, T, E, and ±1.0°C for types R, S, N, B.
Dimensions & Weight:
Dimensions: Approximate dimensions are 3.78 cm x 12.19 cm x 20.32 cm, while another source lists the dimensions as 115mm x 48mm x 150mm. Please note that dimensions may vary depending on the specific packaging and accessories included.
Weight: It has a weight of approximately 454 grams, while another source lists it as about 1.2kg. This difference could be due to packaging or variant differences.

NI PXI-6683

¥4,260.00
The NI PXI-6683 is a high-performance synchronization module designed for PXI and PXI Express systems. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Synchronization Sources: The NI PXI-6683 can synchronize with GPS, IEEE 1588 (also known as Precision Time Protocol or PTP), IRIG-B, and PPS (Pulse Per Second) signals.
Clock Source: It has a board-mounted Temperature-Compensated Crystal Oscillator (TCXO) that can be disciplined to any of the synchronization sources mentioned above for long-term stability.
Trigger Routing: The module can route clock signals and triggers with low skew within a PXI chassis or across multiple chassis.
Timing Accuracy: With its ability to synchronize to precision time sources, the PXI-6683 can significantly improve measurement accuracy and trigger precision.
Dimensions and Weight:
Dimensions: The NI PXI-6683 measures approximately 6.3 inches x 3.9 inches (length x width).
Weight: The weight of the module is not explicitly provided in the available references. However, it is likely to be within the standard weight range for a PXI module.

NI PXI-6052E

¥5,124.00
The NI PXI-6052E is a multifunctional data acquisition (DAQ) device that offers a wide range of capabilities for various industrial and research applications. Here is a breakdown of its parameters, specifications, dimensions, weight, series, features, and functions in English:
Parameters and Specifications:
Resolution: The NI PXI-6052E provides a 16-bit resolution, which ensures accurate data acquisition.
Sampling Rate: It offers a maximum sampling rate of up to 1.25 MS/s per channel. However, please note that depending on the configuration and the number of channels used, the sampling rate may vary.
Channels: This device has 16 analog inputs, 2 analog outputs, and 24 digital I/O lines. Some references also mention 8 analog inputs and 8 DIO channels, which might refer to different configurations or model variants.
Input Range: The analog input range is ±10v.
Input and Output Impedance: The input impedance is 1mohm with 25pf, and the output impedance is 50 ohms.
Counters and Timers: It is equipped with two counters/timers.
Compatibility: The NI PXI-6052E is compatible with various software development environments (ADE) such as LabVIEW, Visual Basic, C#, and C/C++.
Dimensions and Weight:
Exact dimensions and weight for the NI PXI-6052E are not provided in the available references. However, since it is a PXI module, it is likely to conform to the standard dimensions of a PXI card, which are typically defined by the PXI specification.
Series:
The NI PXI-6052E belongs to the National Instruments’ PXI series of modular instrumentation devices.

NI PXI-6052E

¥5,268.00
NI PXI-6052E Parameters, Specifications, Dimensions, Weight, Series, Features, and Applications in English
Parameters and Specifications:
The NI PXI-6052E is a multifunctional data acquisition (DAQ) device that offers high-performance data collection capabilities. Key specifications include:
Analog Inputs: 16 single-ended inputs or 8 differential inputs.
Analog Outputs: 2 outputs.
Digital I/O Lines: 24 digital I/O lines.
Counters/Timers: 2 counters/timers.
Resolution: 16 bits.
Maximum Sampling Rate: Up to 1.25 MS/s per channel.
Input Voltage Range: ±10v.
Output Voltage Range: ±10v.
Dimensions and Weight:
The exact dimensions and weight of the NI PXI-6052E may vary slightly depending on the manufacturer and any accessories included. However, it is typically designed to fit within standard PXI chassis dimensions. For precise measurements, it is recommended to consult the manufacturer’s official documentation.