Grid view List view

Showing 361–372 of 472 results

NI CFP-1808

¥6,235.00
Parameters and specifications:
Series: A family of products belonging to National Instruments, which may be a model of their data acquisition or control cards.
Voltage: According to the search results [1], the voltage is 24V; The search result [2] mentions that the operating voltage is 220V. This may vary by app or product version.
Current: Some search results mention that the current range may be 100-400A, but this may also vary by application.
Output frequency: In some applications, the output frequency may be 50Hz or 350kHz.
Product certification: Search results [2] mention product certification as 12451.

NI SCXI-1104C

¥5,236.00

Parameters

  • Channels: 4 analog input channels
  • Input Ranges: Varies based on sensor/transducer
  • Resolution: Specified by the attached modules

Specifications

  • Brand: National Instruments (NI)
  • Model: SCXI-1104C
  • Compatibility: Designed to work with NI data acquisition hardware and software
  • Connector Type: SCXI-bus compatible

NI PCI-8517

¥5,206.00

Parameters and Specifications

  • Form Factor: PCI
  • Number of Channels: 32
  • Signal Type: Digital I/O
  • Input Voltage Range: TTL/CMOS Compatible
  • Max Sampling Rate: Dependent on application and programming
  • Operating Temperature: 0°C to 55°C (32°F to 131°F)

NI PCI-7813R

¥2,560.00

Parameters

  • Channel Count: 8 channels1
  • Resolution: 24-bit1
  • Maximum Sample Rate: 500k samples per second (SPS) per channel1
  • Input Voltage Range: ±10v1
  • Output Voltage Range: ±10v1

NI PXI-7852R

¥4,265.00

Parameters and specifications:

Analog input: 8-channel analog input, 750 kHz independent sampling rate, 16-bit resolution, ±10 V.
Analog output: 8-channel analog output, 1 MHz independent update rate, 16-bit resolution, ±10 V.
Digital lines: 96 digital lines that can be configured for input, output, timer or custom logic at rates up to 40 MHz.
FPGA: Equipped with a Virtex-5 LX50 FPGA, which can be programmed via the LabVIEW FPGA module.
DMA channel: 3 direct memory access (DMA) channels for high-speed hard disk data reading and writing.

NI CFP-1808

¥6,104.00

Parameters and Specifications:

  • Voltage: 220V (some sources mention 24V as well)12.
  • Current: Range may be 100-400A, but this may vary depending on the application15.
  • Output Frequency: In some applications, the output frequency could be 50Hz or 350kHz125.
  • Weight: 2KG (as mentioned in one source)1.

Dimensions:

  • Specific dimensions are not provided in the search results.

NI SBRIO-9607

¥6,032.00

Parameters and Specifications:

  • Processor: Xilinx Zynq-7020 SoC123
  • Memory: 512 MB DDR3 SDRAM (DRAM), 1512 MB Nonvolatile Memory13
  • Storage: 2 GB SLC NAND Flash2
  • Processor Speed: 667 MHz13
  • Operating System: NI Linux Real-Time (32 bit)3
  • Communication Interfaces: 2 Gigabit Ethernet ports, 1 USB port, 1 RS232 serial port2
  • I/O Interfaces: 40 FPGA general-purpose I/O pins, 2 FPGA high-speed serial interfaces, 4 FPGA differential ADC interfaces, 4 FPGA differential DAC interfaces2

Dimensions and Weight:

  • Size: 95 x 95 mm2
  • Weight: Not specifically mentioned in the search results.

NI SCXI-1104C

¥6,203.00
Parameters and specifications:
Number of differential input channels: 16
Maximum sampling rate: 100 kS/s
Resolution: 24 bits
Input voltage range: ±10 V
Input impedance: 1 MΩ || 5 pF
Signal type: Supports many different types of analog input signals such as voltage, current, resistance, etc., and may also include digital input channels
Measurement accuracy: A measurement of high accuracy, usually expressed in the form of digits or percentages
Sampling rate: Has an adjustable sampling rate, allowing users to select different sampling rates according to application requirements

NI PCI-8517

¥5,263.00

Parameters:

  • Sampling Rate: Up to 2 MS/s (Megasamples per second)
  • Resolution: 16-bit
  • Number of Channels: 16 Differential/32 Single-Ended

Specifications:

  • Input Voltage Range: ±10 V, ±5 V, ±2 V, ±1 V, 0-10 V (selectable)
  • Input Impedance: 1 MΩ || 15 pF (typical)
  • Common-Mode Voltage Range: ±16 V
  • Maximum Throughput: 32 MB/s sustained to host memory

NI PXIE-6368

¥6,035.00
Parameters and specifications:
Analog input channels: 16
Resolution: 24 bits
Maximum sampling rate: 250 kS/s per channel
Digital I/O lines: 48
Analog input range: ±10V
Input impedance: 10 MΩ || 10pf
Digital I/O voltage level: TTL/CMOS compatible
Maximum input voltage: ±20V
Maximum input current: ±10ma

NI PCI-7813R

¥5,622.00

Parameters and Specifications:

  • Channel Count: 8 (Analog input channels: 8 differential or 16 single-ended)1.
  • Resolution: 24 bits1.
  • Maximum Sample Rate: 500 ks/s per channel1.
  • Input Voltage Range: ±10V1.
  • Output Voltage Range: ±10V1.
  • Digital I/O Lines: 241.
  • Counter/Timers: 21.
  • Bus Interface: PCI1.

NI PXI-4472B

¥5,629.00

Parameters and Specifications:

  • Analog Inputs: 8 differential or 16 single-ended1.
  • Analog Outputs: 41.
  • Digital I/O: 48 lines1.
  • Update Rate: Up to 1.25 MS/s4.
  • Resolution: 16-bit1.
  • Voltage Range: ±10v, ±1v, ±100mv1.
  • Operating Temperature: -20°C to 55°C1.
  • Power Consumption: Maximum 14W2.
  • Size: 3U PXI module1.
  • Weight: Not specified.