Parameters and specifications
Measurement principle: Based on Faraday’s law of electromagnetic induction. When a liquid flows through a magnetic field perpendicular to the direction of flow, the flow of the conductive liquid induces a voltage proportional to the average velocity (that is, the volume flow).
Electrode materials: such as 316L (stainless steel), Hc (Hastelloy C), Ti (titanium), Ta (tantalum), etc.
Lining material: such as F4 (polytetrafluoroethylene), PUR (polyurethane rubber), etc.
Accuracy: 0.5 or 1.0 (depending on the caliber).
Repeatability: ±0.1% measurement value.
Operating voltage: 220VAC±10% or 24VDC±10%.
Output signal: Current (4… 20mA) and pulses (frequency 0-1KHZ).
Working pressure: DN10-DN65: ≤2.5Mpa, DN80-DN150: ≤1.6Mpa, DN200-DN1200: ≤1.0Mpa.
Medium temperature: Depending on the lining material, the range is roughly -20℃ to 180℃.
Ambient temperature: ≤85%RH (20℃).
Parameters and specifications
Product type: Analog input interface module.
Input type: General purpose (analog sensor signal).
Number of analog input channels: 8.
Input range:
FBM201:0 to 20 mA DC
FBM201b: 0 to 100 mV DC
FBM201c: 0 to 5 V DC
FBM201d: 0 to 10 V DC.
Power consumption: 7 W (Max).
Heat dissipation: 3 W (Max).
Operating temperature: -40 to +70°C (-40 to +158°F).
Relative humidity: 5 to 95% (non-condensing).
Altitude: -300 to +12,000 m (-1,000 to +40,000 ft).
Parameters and specifications
Brand: FOXBORO
Model: P0914XB
Functions: Support transparent data transmission and protocol conversion, virtual data private network APN, point-to-point/multipoint data transmission, short message data backup channel, etc
Working environment: suitable for low and high temperature working environment, EMC anti-interference design suitable for electromagnetic harsh environment applications
Size and weight
Weight: about 2KG
The FCM2F2 P0914YZ is FOXBORO’s device for extending fieldbus networks, increasing the number of nodes and coverage of the bus to accommodate the needs of more complex industrial automation systems.
It may support a variety of fieldbus protocols, such as PROFIBUS, Modbus, etc., and can be easily integrated into existing automation systems to achieve seamless communication with other devices.
High-speed communication technology ensures the speed and accuracy of data transmission on the bus, and meets the real-time requirements of industrial automation system.
Power module: If it is a power module, the FBM216B P0927AJ has high performance, high stability, supports hot swap, and usually has power status indication and overload protection. In addition, it can also realize the input and output of digital signals, and supports a variety of input/output types, including switching input, fixed voltage output, fixed current output, etc.
Controller module: If it is a controller module, the FBM216B P0927AJ may be used for signal acquisition, signal processing, data communication, fault diagnosis and alarm, and control logic.
Operating voltage: For power modules, the power supply voltage is 24VDC.
Input signal type: The FBM202 can accept various input signal types, such as analog signals, digital signals, etc.
Output signal type: The type of signal output by the device, which may vary by application.
Power requirements: The specific values of the power supply voltage and current required by the FBM202 are not directly given, but the power requirements of industrial automation equipment are usually detailed in the technical manual of the equipment.
Operating temperature range: The temperature range that the device can withstand under normal operating conditions, the specific value may vary by model and application.
Storage temperature range: Temperature range that the device can withstand when it is stored or not working. For details, see the technical manual.
Communication interfaces: The FBM202 supports communication interfaces, such as Ethernet. The specific communication protocols may vary depending on the model and application.
Control accuracy: The control accuracy or measurement accuracy of the FBM202 on the input signal may vary by model and application, but Foxboro products generally have high control accuracy and measurement accuracy.
Output: Eight output channels are available, each of which can output an analog signal from 4 to 20mA, or a digital HART® signal superimposed on a 4 to 20mA analog signal.
Communication: Supports HART generic commands for two-way digital communication with HART field equipment.
Power supply: 24V.
Current: In the range of 100-400A (but note that this may be different from the operating current of the module itself and may refer to the range of currents it can handle).
Memory: Up to 128MB of memory expansion capacity.
Operating ambient temperature: -40 to 100 degrees Celsius or -20 to +70 degrees Celsius
Number of channels: The FBM237 has eight 20mA dc analog output channels.
Output range (per channel) : 0-20.4mA dc.
Output load: Maximum 750Ω.
Power requirements: Input voltage range is 24V dc +5%, -10%.
Power consumption: 7W (Max).
Heat dissipation: 3.5W (Max).
Vibration: 0.75g (5 to 200Hz).
Communication: Communicates with the corresponding FCM via the component fieldbus. Fieldbus communication Communication with the control station is via an optional redundant 10Mbps Ethernet fieldbus.
