Grid view List view

Showing 493–504 of 674 results

FBM216B

¥4,152.00
Parameters and specifications:
Support system: DCS (Distributed Control System).
Communication interface: Supports point-to-point, master/slave, asynchronous, half-duplex, and 1200baud communication with field devices.
Error checking: Parity check for each byte and CRC check for one byte.
Speed: Can request and receive two digital messages per second from field devices.
Signal support: Support for standard 4 to 20mA analog sensor signals and digital HART frequency shift keying (FSK) signals superposed on 4 to 20mA analog signals.
Supported HART meter types: HART meters that comply with version 5, 6 or 7 of the HART specification can be used.
Size and weight:
Size: Specific size information is not explicitly given in the search results, but similar Foxboro modules are likely to be around 140mm x 80mm x 60mm.
Weight: The exact weight information is not explicitly given in the search results, but a similar Foxboro module may weigh about 0.5kg or 0.21kg.

FBM233

¥6,025.00
Parameters and specifications:
Type: Digital input module.
Function: Used in industrial automation control system to receive and process digital input signals.
Number of channels: The FBM233 module usually has multiple input channels and can simultaneously monitor and process multiple digital input signals.
Input types: Multiple input types are supported, such as discrete inputs (switches, buttons, etc.) or digital signals (sensor outputs).
Communication protocol: The digital input signal is transmitted to the control system through some communication protocol (such as Modbus).
Programmability: Some modules may have programmable features that allow users to configure and customize to specific application needs.

FBM230

¥6,230.00
Parameters and specifications:
Type: FBM230 P0926GU is a digital input module that provides high-speed digital input signal acquisition and processing.
Input signal type: high speed digital input signal.
Input signal range: 0-32 VDC.
Input impedance: 1 MΩ.
Input signal update rate: 200μs.
Input channels: 8 channels.
Isolation: 250 Vrms, 60 Hz.
Module power supply: 5V DC.
Module power consumption: 1.5W.
Communication protocols: Modbus RTU (for serial devices), Modbus ASCII (for serial devices), Modbus/TCP (for Ethernet devices).
Port configuration: The FBM230 comes with four ports, each of which can be configured to use RS-232, RS-422, or RS-485 physical interface standards.

FBM232

¥4,152.00
Parameters and specifications:
Data transfer rate: The FBM232 supports Ethernet transfer rates of 10 Mbps/100 Mbps.
Communication capability: Can communicate with up to 64 field devices.
Data integration capability: Each card can provide data integration capability of up to 2000 DCI (Distributed Control Interface) modules.
Protocol support: FBM232 has standard data communication drivers (Modbus, ModbusTCP/IP, OPC, etc.), and can also be developed and loaded according to customer needs for specific communication protocols.
Environment adaptability: The FBM232 and its wiring terminals are suitable for installation in Class1Division2 and Zone2 environments and comply with G3 (harsh) environment standards.
Power and Signal: The FOXBORO FBM232 P0926GW controller (PWM and fault) signal is compatible with 5 V CMOS logic and can also be adjusted to 15 V level using an external resistor divider.

FBM201

¥4,150.00
Parameters and specifications:
Type: Analog input interface module.
Input channels: 8 isolated, independent channels.
Input range:
FBM201:0 to 20 mA dc
FBM201b: 0 to 100 mV dc
FBM201c: 0 to 5 V dc
FBM201d: 0 to 10 V dc
Power consumption: 7 W (Max).
Heat dissipation: 3 W (Max).

FBMSVH

¥5,210.00
Parameters:
Input range: 0 ~ 4000 psi.
Output range: 4 to 20 ma DC.
Power supply: 12v DC to 45v DC.
Accuracy: +/ -0.1% of the range.
Operating temperature: -40 to 85°C (-40 to 185°F).
Specifications:
Material: stainless steel.
Process connection: 1/2 inch NPT.
Electrical connection: 1/2 inch NPT catheter.

FBM204

¥5,628.00
Parameters and specifications:
Analog input/output channels: The FBM204 has four 20 mA DC analog input channels and four 20 mA DC analog output channels.
Communication: The FBM204 communicates with the main control station via an optional redundant 10Mbps Ethernet-based fieldbus. The fieldbus communication component FCM is used for the conversion between the 2Mbps communication protocol adopted by FBM and the 10Mbps communication protocol adopted by the Ethernet fieldbus.
Accuracy: The accuracy of the input channel is ±0.03 of the range, and the accuracy temperature coefficient is ±50 ppm/ºC.
Conversion time: High precision through Sigma-Delta data conversion, providing a new analog input reading every 25 milliseconds.
Fail-safe configuration: Provides configurable options for fail-safe configuration

P0926GH

¥4,152.00
Parameters:
Control type: Process control.
Input/output channel: Multi-channel design, support analog and digital input/output.
Control accuracy: high-precision control algorithm to ensure accurate control effect.
Working environment: adapt to harsh industrial environment, with good anti-interference ability.
Communication interface: supports a variety of industrial communication protocols to facilitate data exchange with other equipment.
Power requirements: Adapt to a wide range of power fluctuations to ensure stable operation.
Rated voltage: 230V.
Output frequency: 150.
Specifications:
Weight: 1.24kg.
Specification: 263525 (may refer to size).
Color: Black.
Features: Modules.
Bom number: 2451856.

FBM01

¥4,152.00
Parameters and specifications:
Input interface: Contains eight 20 mA DC analog input channels, each of which can accept 2-wire analog sensor inputs, such as 4 to 20 mA transmitters or self-powered 20 mA signal sources.
Accuracy: ±0.05 of the range.
Power requirements:
Input voltage range (redundant) : 26 to 42 volts DC.
Power consumption: 14 W (maximum), heat dissipation: 12 W (maximum).
Communication: via redundant fieldbus.
Size and weight:
Weight: Approximately 2KG

P0922YU

¥5,262.00
Parameters and specifications:
Power input:
Input voltage range: 85 to 265 volts AC or 108 to 145 volts DC, nominal 125 volts DC.
Input frequency range: 47 to 63 Hz.
Input current: 5.6A (RMS maximum) for 85 V AC input, 2.5A (RMS maximum) for 230 V AC input.
Power output:
Output voltage: 24.0 V DC, 0.2 V DC nominal factory Settings.
Voltage line adjustment rate: 2.0% of Vout.

FBM217

¥6,025.00
Parameters and specifications:
Input channels: 32 independent channels.
Input range (per channel) : open circuit voltage 15-30V dc, short circuit voltage 0-5V dc.
Input impedance: ON-state 1 kW (Max), at 15 V dc; OFF- Status 100 kW (min) at 30V dc.
Communication: Communicate with FCM and FCP through fieldbus.
Power requirements: 24 V dc +5%, -10%.
Power consumption (Max) : 3W (Max) 24V dc.
Heat dissipation (Max) : 5W (Max) at 24V dc.
Current: 4 mA (typical) at 5 to 60 V dc.
Vibration: 0.75g (5 to 200Hz).
Isolation: Channels are isolated from each other and from the ground.

FBM201

¥5,241.00
Parameters and specifications:
Input channels: The FBM201 provides eight isolated and independent analog input channels for receiving analog sensor signals.
Input range:
FBM201:0 to 20 mA DC
FBM201b: 0 to 100 mV DC
FBM201c: 0 to 5 V DC
FBM201d: 0 to 10 V DC
Power consumption: Maximum 7 W.
Heat dissipation: Maximum value is 3 W.
Communication interface: communicates with its associated FCM or FCP via a redundant 2 Mbps module fieldbus.
Working environment:
Temperature: -40 to +70°C (-40 to +158°F)
Relative humidity: 5 to 95% (non-condensing)
Altitude: -300 to +12,000 m (-1,000 to +40,000 ft)