Port configuration: Usually equipped with 8 optical fiber ports (SFP) and 8 copper cable ports (RJ45).
Stack capability: Support for up to eight A4 switches to interconnect in a single stack to create a virtual switch that delivers up to 140.8 Gbps of capacity.
Switch capacity: The capacity of a single switch can reach 17.6 Gbps.
Uplink port: can be configured as multiple Gigabit Ethernet uplink ports.
MAC Address support: Up to 16,000 MAC addresses are supported.
Quality of Service (QoS) : Provides multi-layer packet classification and priority queuing, supporting integrated multimedia networks, including voice over IP (VoIP) and IP video.
Voltage: The specific voltage may vary from application to application, but generally supports a stable voltage output, which can be a direct current (DC) or alternating current (AC) power supply.
Communication rate: Supports Ethernet network transmission rates of 10 Mbps or 100 Mbps.
Power distribution: Multiple power output channels can supply power to multiple devices at the same time.
Protection function: including over voltage protection, over current protection and short circuit protection, to ensure the safe operation of the connected device.
Power monitoring: The ability to monitor the status of the power supply, including voltage and current, in order to monitor the health of the power supply in real time.
specification
Application: Widely used in industrial control system, PLC system, DCS system, instrument equipment, electronic manufacturing and other fields.
Interfaces: Equipped with communication interfaces for data communication and integration with other devices and systems.
Programmable: Allows users to configure output voltage and current parameters.
Power supply: Support direct current (DC) or AC (AC) power supply, such as 200VDC or 24VDC
Frequency: such as 1020Hz
Number of channels: There may be multiple channels, such as 1*8 channels
Communication interface: Supports a variety of communication interfaces, such as Modbus, Ethernet, RS-232, RS-485 and so on
specification
Function: The FOXBORO FBM233 P0926GX is described as a power module and a control pulse module, so it may have both power and control functions.
Compatibility: Compatible with FOXBORO series devices and systems and supports Modbus Master drivers
Size and weight
Dimensions: Dimensions may vary by manufacturer and product model, there are references to dimensions 5.1 cm x 12.7 cm x 11.4 cm, and there are references to specifications 36*42mm
Type: Field control processor, ARM system-on-chip (SOC) with stored programs, using high-speed communication capabilities.
Memory: 128MB SDRAM and 128MB flash, memory allocation is 15.75MB.
Voltage: 24V (Note that the voltage may vary depending on the application scenario and configuration).
Current: 100-400A (This current range may indicate the range of input/output currents that the device can handle, rather than the power consumption current of the device itself).
Processor performance: Three times the performance of older controllers, delivering outstanding performance even in the most demanding applications.
Size and weight
Size: 14.7cm x 5.18cm x 11.6cm.
Weight: 0.8 kg (product itself), shipping weight is 2 kg.
Processing power: The FCP280 RH924YA has an ARM system-on-chip (SOC) with stored programs, using high-speed communication capabilities.
Memory: Equipped with 128 megabytes of SDRAM and 128 megabytes of flash memory, the block’s memory allocation is 15.75 MB.
Communication capability: Supports up to 128 compact or standard 200 series FBMS, or up to 128 combination of 100 series FBMS and 200 series FBMS (no more than 64 100 series FBMS in this configuration) without the need for a fieldbus communication module.
Network connection: Connect to the Mesh control network system via standard fiber or copper 100 Mbps Ethernet cable.
Size and weight
Dimensions: The FCP280 RH924YA measures approximately 14.7 cm x 5.18 cm x 11.6 cm.
Weight: Its weight is 0.8 kg and its shipping weight is 2 kg.
Power consumption: Maximum 8.5W per non-fault-tolerant module
Operating temperature: 0 to +60 degrees Celsius (+32 to +140 degrees Fahrenheit)
Configuration: Single-processor module, fault-tolerant by two processor modules, the substrate integrated into an interconnect fault-tolerant connector
Processor: Possible Microprocessor based AMD Elan 520 100MHz, I/O processor CommControl™ ASIC
Size and weight
Dimensions: Length 14.7cm x width 5.15cm x height 11.4cm
Weight: 0.6 kg (product itself), shipping weight 1.5 kg
argument
Power supply: DC24V, optional AC/DC85-265V, DC-48V, DC12V.
Internal power consumption: ≤5W.
Operating temperature: -10℃ to +70℃ (wide temperature -40℃ to +75℃); Storage temperature: -45℃ to +85℃; Humidity: 10% to 95% no condensation.
Transfer rate: Supports transfer rates up to 10 Mbps or 100 Mbps.
specification
Dimensions (width × height × depth) : 50mm×136mm×118mm.
Network interface: RJ45 port supports 10Base-T/100Base-TX adaptive, transmission distance <100 meters; The optical port supports 100Base-FX and SC/ST ports. The optical port supports single-mode (20/40/60/80Km) and multi-mode (2/5Km), and the wavelength is 1310nm.
Protocol support: Support Modbus TCP/IP, EtherNet/IP and other industrial Ethernet protocols.
