Parameters and specifications
Number of channels: Bentley 3500/61 offers six temperature monitoring channels that accept temperature input from resistance temperature detectors (RTDS) and thermocouples (TCS).
Output: Compared to 3500/60, the 3500/61 offers an additional 4-20mA recorder output for each of its six channels.
Processor and memory: Although specific technical parameters are not given directly, similar DCS modules may have a high-performance processor and enough memory to support complex networking applications.
Configuration software: Measurement configuration using the 3500 Framework configuration software allows users to configure the RTD/TC non-isolated version to accept either TC or a mixture of TC and RTD inputs.
Size and weight
Dimensions: Specific physical dimensions (such as length, width, and height) are not explicitly given in search results. But the 3500 frame comes in two sizes: the full-size frame (19-inch EIA frame with 14 available module slots) and the mini frame
argument
Voltage: 24V
Current: 100-400A (This current range may refer to the power input or output current range supported by the device, which needs to be determined according to the actual use)
Power consumption: Typical power consumption is 3.2 watts
Signal range: Each keyer module accepts two sensor signals, with input signals ranging from + 0.8V to -21.0V (non-isolated I/O modules) or +5V to -11V (isolated I/O modules)
Signal conditioning: The processed signal has an accuracy of ±1 cpm at 0.017 to 60 Hz, ±8 cpm at 61 to 150 Hz, and ±1% at 151 to 20 kHz
specification
Type: Module 125792-01 in the BENTLY 3500/25 series, which may be a PLC/DCS card module for vibration monitoring or motion control
Function: As an enhanced keying module, it provides extended keying signal processing capabilities while remaining compatible with existing keying modules
Size and weight
Size: The exact size is not given directly, but depending on the conventional design of BENTLY products, the module may be a compact card-level or box-level unit
Weight: Approximately 2KG
argument
Input voltage range: Depending on the search results, there are different range descriptions. One says it’s 18 VDC to 60 VDC, another says it’s 12-48VDC.
Input current: 1 mA to 32 mA or specific values may vary.
Output voltage range: 1 VDC to 24 VDC or 5VDC, depending on configuration or version.
Output current: up to 100 mA or up to 10A, again this may vary by configuration.
Accuracy: ±0.5% of full scale.
Linearity: ±0.25% of full scale.
Response time: ≤500μs.
argument
Part number: 3500/92
Manufacturer: Bently Nevada
Product type: Communication gateway module
Power consumption:
Modbus RS232/RS422 I/O module: The typical value is 5 watts
Modbus RS485 I/O module: The typical value is 5.6 watts
specification
Series: 3500 series
Functional safety: SIL 2
Country of Manufacture: USA (USA)
Size and weight
Dimensions: 241mm x 24.4mm x 242mm (H x W x D)
Weight: 0.82 kg
argument
Model: 3500/15 133292-01
Manufacturer: Bently Nevada
Type: Power module or interface module (specific type may vary by application)
Output frequency: Because the specific value of the output frequency is not directly mentioned in the search results, the specific parameters cannot be given. As a general rule of thumb, however, such modules may support multiple output frequencies, depending on their design and application requirements.
specification
Series: 3500 series
Application: Widely used in large machinery vibration monitoring and protection, such as steam turbine, water turbine, blower, compressor and so on.
Compatibility: May be compatible with other Bently Nevada monitoring systems and sensors, such as the 330500-02-00 piezoelectric vibration velocity sensor.
The exact size and weight may vary by supplier or manufacturer, but in general, the module is a half-height, dual-channel module with dimensions (D x W x H) of roughly 25.65cm x 2.44cm x 11.99cm and a weight of 0.34kg.
Series:
The product is part of Bently Nevada’s 3500XL family.
Manufacturer: Bently Nevada (now part of Baker Hughes, owned by GE).
Series: 3500 series.
Features:
Multi-channel: A 4-channel monitor that can be programmed independently for each channel.
Modular design: Each channel provides an independent 4 to 20mA scale value.
Flexibility: Can accept and process a variety of sensor signals, including displacement, speed and acceleration.
Programmability: Each channel is programmed using 3500 frame configuration software to implement various functions such as radial vibration, axial displacement, differential expansion, eccentricity, etc.
Alarm and protection: Alarm and hazard setpoints can be set to provide mechanical protection.
