Measuring range: depends on the specific sensor.
Accuracy: ±0.1% full scale.
Resolution: Depends on the specific sensor.
Sampling frequency: up to 10Hz.
Input signal: can receive 4-20mA, 0-5V, 0-10V and other standard analog signals, as well as digital signals such as Modbus, Profibus and so on.
Output signal: Also support 4-20mA, 0-5V, 0-10V and other standard analog signals, as well as relay output (dry contact).
Power supply: Usually 100-240V AC, 50/60Hz, maximum power consumption of 25W.
Power supply voltage: 24 VDC
Operating temperature: -40℃ to 85℃
Signal output: Using 4-20 mA current output and Modbus communication protocol
Specifications:
Number of channels: There are 16 separate relay output channels, each of which can be programmed independently to perform the required voting logic
Relay contact rating: 25A at 250 VAC or 30A at 30 VDC
As transient data interface (TDI) for 3500 monitoring system.
Combine data collection and communication capabilities to transmit steady and transient dynamic data.
Key parameters :
Compatible software: System1 condition monitoring and diagnosis software, 3500 system configuration software.
Interface with M series monitors (such as 3500/40M, 3500/42M, etc.).
Data is transmitted over Ethernet links.
The Bently Nevada 330103-00-03-05-02-05 Sensor is designed to detect vibrations in machinery and equipment. It is typically used in industrial settings to monitor the health of machines and detect potential problems before they become serious. The sensor is highly sensitive and can detect even small vibrations, making it an essential tool for preventive maintenance.
Product Specifications
Model Number: 330103-00-03-05-02-05
Type: Vibration Sensor
Frequency Range: 10 Hz to 1 kHz
Sensitivity: 100 mV/g
Temperature Range: -50°C to +120°C
Connector Type: 2-pin Mil-C-5015
Input channels: 16
Frequency range: 10 Hz to 10 kHz
Signal range: ±10 V
Temperature range: -20°C to 70°C
Power supply: 24 VDC ±10%
Dimensions: 8.5 x 5.5 x 11 in.
Module type : The specific module type of 3500/33-01-02 is not specified, but is part of the 3500 system.
System features : highly modular design, support continuous, online monitoring.
compatibility : compatible with other 3500 system modules, together constitute a complete monitoring system.
function
Used in mechanical protection applications to provide important information for early identification of mechanical failures.
As part of the 3500 system, participate in the overall monitoring and data processing of the system.
Continuous monitoring and protection : specially designed for continuous monitoring and protection of important asset equipment and auxiliary equipment of the factory, suitable for oil and gas, power generation, water treatment and other industries.
Key parameters
input : provides four vibration inputs and four temperature inputs, accelerometers, speed sensors, etc.
output : six relay outputs, four 4-20mA recorder outputs.
communication : optional Modbus gateway, supports connection with DCS, PLC, SCADA and other systems.
Equipment monitoring and protection : specially designed for continuous monitoring and protection of important asset equipment and auxiliary equipment of the factory, suitable for oil and gas, power generation, water treatment and other industries
Key parameters :
Enter : a total of 8 (4 vibrations and 4 temperatures)
output : 6 discrete (individually programmable relays), 4 proportional (4-20mA)
Alarm level : The alarm level is classified into Alarm and Critical levels. Each measurement variable can be configured with a maximum of eight values per channel
Input signal : Processes signals from the resistance temperature detector (RTD) and thermocouple (TC).
Number of channels : six temperature monitoring channels.
Output function : no recorder output (different from 3500/61).
Specifications and dimensions :
External terminal : non-isolated version, bulkhead rack accuracy ±3°C(25°C).
Operating temperature : -30°C to +65°C.
Storage temperature : -40°C to +85°C.
Physical dimensions : 241.3mm x 24.4mm x 241.8mm (H x W x D).
Weight : 0.91 kg (2.0 lb).
overspeed inspection : Bently 3500/53 is an electronic overspeed inspection system specially designed for 3500 series mechanical inspection systems, which provides a tachometer system with high reliability and fast response, and is the ideal choice of overspeed protection system
Key parameters :
signal input : Accepts a signal from the proximity probe sensor or magnetic pickup in the range + 10.0V to -24.0V
input impedance : 20 kΩ; Typical power consumption is 8.0 Watts
sensor support : Supports a variety of Bently Nevada sensors, including 3300 series, 7200 series,
output impedance : 550Ω; Sensor power supply is 24V DC, maximum 40 MA
Input signal : can accept 1 to 4 displacement, speed or acceleration sensor signals.
Power consumption : typical value 7.7 watts.
Measuring range : 0-5g, resolution 0.01g.
Sampling rate : up to 10kHz.
output : analog signal output, BNC interface.
