argument
Input voltage: 24V DC
Output voltage: inverter output voltage
Output power: 16kW
Frequency range: 0-400Hz
Maximum output current: 10A
Operating temperature range: -40℃ ~ +85℃
specification
Hardware components: including power supply, main processing module, bus interface module, communication module and I/O slot.
Processor specifications: Power PC dual-core processor, 800MHZ main frequency, with floating point coprocessor; 512MBytes memory, independent ECC memory.
Software composition: Configuration software Architect, compliant with IEC611131-2 standards, supports a variety of programming languages and protocols.
Size and weight
Size: 100mm x 50mm x 20mm
Weight: 0.3kg
Parameters and specifications
Manufacturer: Bently Nevada
Series: 3500 series
Input signal: -10 Vdc to +10 Vdc (some say 12-48VDC)
Power consumption: 7.7W (It is also said that the working current is ≤35mA, under the condition of 12V DC power supply)
Shaft and sensor power supplies: -24 Vdc
Product type: transient data interface module
Temperature: 25 °C (also said to be operating temperature -20°C to +50°C, storage temperature -40°C to +70°C)
Resolution: Temperature 0.1 ° C, humidity 0.1%RH (This parameter may be specific to specific application scenarios)
Measurement range: Humidity 0~100%RH, temperature -40~80℃ (This parameter may be specific to the application scenario)
Parameters and specifications
Input signal: Support -10 Vdc to +10 Vdc input signal.
Power consumption: 7.7 Watts.
Shaft power supply and sensor power supply: both -24 Vdc.
Operating temperature: Depending on the search results, the operating temperature may vary. One says it’s 25 degrees Celsius, another says it’s -20°C to +50°C, and still another says it’s 0°C to 55°C. The storage temperature range may be wider, such as -40°C to +70°C.
Resolution: In some specific applications, the resolution of temperature and humidity may be involved, such as temperature 0.1 ° C, humidity 0.1%RH.
Working current: ≤35mA (under 12V DC power supply condition).
Voltage range: The operating voltage may be 10V to 30V DC, or the input voltage range of 12-48VDC as mentioned in [3].
Size and weight
Size: According to the search results, there are two different size specifications. One is 9.50 x 4.50 x 1.00 inches (or similar) and the other is 263525mm. Note that these two sizes may work for different product versions or application scenarios.
Weight: There are also different accounts. One is 0.85 pounds, another is about 120 grams, and the other is 1.24kg.
trait
Data collection: Steady state and transient dynamic (waveform) data is continuously collected and transmitted to the host software over an Ethernet link.
Mode switching: Used to switch 3500 racks between “RUN” and “Programming” modes, RUN mode prevents configuration modifications while allowing the racks to operate normally.
Static data collection: has the traditional static data collection function.
High-resolution transient data logging: An optional channel-enabled disk can be used to record dynamic, high-resolution transient data.
Communication processing capabilities: The 3500 rack contains the communication processing capabilities of the TDI, and although the TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system.
1. Parameters
Part Number: 3500/05-01-02-00-00-01 (However, please note that the last digit of the part number in some search results is ‘0’, which may be a difference between batches or versions)
Manufacturer: Bently Nevada
Series: 3500/05
Power supply: The input voltage may be 24VDC or 48VDC, depending on the configuration and application scenario
Output voltage: 24VDC
Operating temperature range: -40℃ ~ +85℃
Storage temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 95%, non-condensing
argument
Input voltage:
High voltage AC: 175 to 264 Vac rms (247 to 373 Vac, pk), 47 to 63Hz
Low voltage AC: 85 to 132 Vac rms (120 to 188 Vac, pk), 47 to 63 Hz
HVDC: 88 to 140 Vdc
Low voltage DC: 20 to 30 Vdc
Operating frequency: 47 to 63 Hz
Out-of-limit protection: For all power supply types, low voltages will not damage the power supply or PIM, but out-of-range voltages will open fuses on the PIM
Power OK LED: When the power is working normally, the LED lights up
Operating temperature: -30℃ to +65℃ (-22 F to +150 F)
Storage temperature: -40℃ to +85℃ (-40 F to +185 F)
Product Type: Four-channel monitor with Prox/Seismic I/O module
Input: Receives input from proximity sensors and seismic sensors
Output: Provides vibration and position information and compares the adjusted signal with a user programmable alarm
Communication interface: May support a variety of communication interfaces, such as Ethernet, Modbus, etc
specification
Number of channels: four channels
Features: Vibration and position measurement, as well as user programmable alarms
Software support: Programming with 3500 framework configuration software
Parameters and specifications
Type: Relay modules, part of Bently Nevada’s product line of monitoring and control systems.
Monitoring function: The vibration level of mechanical equipment can be monitored by installing vibration sensors (such as acceleration sensors or speed sensors).
Alarm and protection: With alarm and protection functions, an alarm can be triggered when the vibration level exceeds a preset threshold or the device has an abnormal vibration mode.
Communication interface: There may be a communication interface, such as Modbus or Ethernet, for data exchange and communication with other devices or monitoring systems.
Programmability: Supports user-defined parameters and logic to adapt to different application scenarios and requirements.
Data logging: May have a data logging function to record the operating status and historical data of the device.
Size and weight
Size: The exact size may vary by model and configuration, but depending on some search results, similar products may be 138mm x 36mm x 145mm (length x width x height).
Weight: About 0.3kg. Note, however, that this is only an approximation and the weight of the actual product may vary.
argument
Display: 9 inch color LCD display
Resolution: 800 x 600
Input signal: Sensor data from the Bently Nevada 3500 monitoring system
Output signal: alarm, trend analysis data
Input voltage: 90 V to 265 V AC, input current 4.5A; Output voltage 24 V DC, output current 3.3A, power 79.2W
Efficiency: up to 85%
specification
Operating temperature: 0°C to +50°C, storage temperature: -20°C to +70°C
Manufacturing standard: Meets American Petroleum Institute Standard 670
