Parameters and specifications
Input signal: Support -10 Vdc to +10 Vdc input signal.
Power consumption: 7.7 Watts.
Shaft power supply and sensor power supply: both -24 Vdc.
Operating temperature: Depending on the search results, the operating temperature may vary. One says it’s 25 degrees Celsius, another says it’s -20°C to +50°C, and still another says it’s 0°C to 55°C. The storage temperature range may be wider, such as -40°C to +70°C.
Resolution: In some specific applications, the resolution of temperature and humidity may be involved, such as temperature 0.1 ° C, humidity 0.1%RH.
Working current: ≤35mA (under 12V DC power supply condition).
Voltage range: The operating voltage may be 10V to 30V DC, or the input voltage range of 12-48VDC as mentioned in [3].
Size and weight
Size: According to the search results, there are two different size specifications. One is 9.50 x 4.50 x 1.00 inches (or similar) and the other is 263525mm. Note that these two sizes may work for different product versions or application scenarios.
Weight: There are also different accounts. One is 0.85 pounds, another is about 120 grams, and the other is 1.24kg.
argument
Type: four-channel monitor.
Sensitivity:
Radial vibration: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil).
Axial displacement: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil).
Eccentricity: 3.94 mV/μm (100 mV/mil) or 7.87 mV/μm (200 mV/mil).
Differential expansion: 0.394 mV/μm (10 mV/mil) or 0.787 mV/μm (20 mV/mil).
Accuracy:
Pass frequency and gap: ±0.33% of full scale, up to ±1%.
1X & 2X: ±0.33% of full scale, up to ±1%.
specification
Brand: Bently Nevada.
Series: 3500 series.
Model: 3500/40M 176449-01.
Weight:
Product weight: 1.29 kg.
Shipping weight: 2.5 kg.
argument
Input voltage range: 12-48VDC.
Output voltage: 5VDC.
Output current: Max. 10A.
Operating temperature: -20°C to +50°C.
Storage temperature: -40°C to +70°C.
Ambient humidity: 5% to 95% relative humidity (no condensation).
specification
Brand: Bently Nevada.
Series: 3500 series.
Type: Electronic overspeed detection system, specifically the overspeed detection control module.
Specification Model: 3500/53M.
trait
Data collection: Steady state and transient dynamic (waveform) data is continuously collected and transmitted to the host software over an Ethernet link.
Mode switching: Used to switch 3500 racks between “RUN” and “Programming” modes, RUN mode prevents configuration modifications while allowing the racks to operate normally.
Static data collection: has the traditional static data collection function.
High-resolution transient data logging: An optional channel-enabled disk can be used to record dynamic, high-resolution transient data.
Communication processing capabilities: The 3500 rack contains the communication processing capabilities of the TDI, and although the TDI performs some tasks shared by the entire rack, it is not a critical component of the monitoring system.
1. Parameters
Part Number: 3500/05-01-02-00-00-01 (However, please note that the last digit of the part number in some search results is ‘0’, which may be a difference between batches or versions)
Manufacturer: Bently Nevada
Series: 3500/05
Power supply: The input voltage may be 24VDC or 48VDC, depending on the configuration and application scenario
Output voltage: 24VDC
Operating temperature range: -40℃ ~ +85℃
Storage temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 95%, non-condensing
argument
Input voltage:
High voltage AC: 175 to 264 Vac rms (247 to 373 Vac, pk), 47 to 63Hz
Low voltage AC: 85 to 132 Vac rms (120 to 188 Vac, pk), 47 to 63 Hz
HVDC: 88 to 140 Vdc
Low voltage DC: 20 to 30 Vdc
Operating frequency: 47 to 63 Hz
Out-of-limit protection: For all power supply types, low voltages will not damage the power supply or PIM, but out-of-range voltages will open fuses on the PIM
Power OK LED: When the power is working normally, the LED lights up
Operating temperature: -30℃ to +65℃ (-22 F to +150 F)
Storage temperature: -40℃ to +85℃ (-40 F to +185 F)
Product Type: Four-channel monitor with Prox/Seismic I/O module
Input: Receives input from proximity sensors and seismic sensors
Output: Provides vibration and position information and compares the adjusted signal with a user programmable alarm
Communication interface: May support a variety of communication interfaces, such as Ethernet, Modbus, etc
specification
Number of channels: four channels
Features: Vibration and position measurement, as well as user programmable alarms
Software support: Programming with 3500 framework configuration software
Parameters and specifications
Type: Relay modules, part of Bently Nevada’s product line of monitoring and control systems.
Monitoring function: The vibration level of mechanical equipment can be monitored by installing vibration sensors (such as acceleration sensors or speed sensors).
Alarm and protection: With alarm and protection functions, an alarm can be triggered when the vibration level exceeds a preset threshold or the device has an abnormal vibration mode.
Communication interface: There may be a communication interface, such as Modbus or Ethernet, for data exchange and communication with other devices or monitoring systems.
Programmability: Supports user-defined parameters and logic to adapt to different application scenarios and requirements.
Data logging: May have a data logging function to record the operating status and historical data of the device.
Size and weight
Size: The exact size may vary by model and configuration, but depending on some search results, similar products may be 138mm x 36mm x 145mm (length x width x height).
Weight: About 0.3kg. Note, however, that this is only an approximation and the weight of the actual product may vary.
argument
Display: 9 inch color LCD display
Resolution: 800 x 600
Input signal: Sensor data from the Bently Nevada 3500 monitoring system
Output signal: alarm, trend analysis data
Input voltage: 90 V to 265 V AC, input current 4.5A; Output voltage 24 V DC, output current 3.3A, power 79.2W
Efficiency: up to 85%
specification
Operating temperature: 0°C to +50°C, storage temperature: -20°C to +70°C
Manufacturing standard: Meets American Petroleum Institute Standard 670
argument
Input voltage: 24V DC
Operating temperature: -40℃~+85℃
Humidity range: 0% to 95%
Signal range: 0~10V
Sampling frequency: 10kHz
Output mode: RS485
Measurement range (for some application scenarios) : 0-5mm
Measurement accuracy: ±0.01mm
specification
Dimensions: 94mm x 30mm x 120mm (or another description as 241mm x 24.4mm x 99.1mm, which may refer to different products or parts)
Protection Level: IP65 (IP67 in some descriptions)
argument
Input signal: can receive 1 to 4 proximity sensor, speed sensor or acceleration sensor signals
Power consumption: Typical value is 7.7 watts
Input/output standard: 10kΩ (proximity sensor and acceleration input)
Output impedance: 550Ω
Sensor power supply: -24 volts DC
Direct filter: 3 dB at 15.6 Hz
Gap filter: 3 dB at 0.41 Hz
Frequency response: offset -3 dB, 0.01Hz (speed II only); Indeterminate filter -3 dB at 40 Hz (Velocity II only)
specification
Series: 3500/42M series
Type: four-channel monitor