Type: Module 125792-01 in the BENTLY 3500/25 series, which may be a PLC/DCS card module for vibration monitoring or motion control
Function: As an enhanced keying module, it provides extended keying signal processing capabilities while remaining compatible with existing keying modules
Size and weight
Size: The exact size is not given directly, but depending on the conventional design of BENTLY products, the module may be a compact card-level or box-level unit
Weight: Approximately 2KG
Input voltage range: Depending on the search results, there are different range descriptions. One says it’s 18 VDC to 60 VDC, another says it’s 12-48VDC.
Input current: 1 mA to 32 mA or specific values may vary.
Output voltage range: 1 VDC to 24 VDC or 5VDC, depending on configuration or version.
Output current: up to 100 mA or up to 10A, again this may vary by configuration.
Accuracy: ±0.5% of full scale.
Linearity: ±0.25% of full scale.
Response time: ≤500μs.
It serves as a crucial module providing low-voltage DC power for the Bently Nevada 3500 series vibration monitoring system, ensuring stable power supply to various monitoring components such as sensors, acquisition cards, and control modules
Weight and Dimensions:
Weight: Approximately 1.39 kilograms (3.06 pounds), though variations may exist
Dimensions: Specific dimensions are not provided, but it is a half-height module designed to fit within the specially designed slot on the left side of the 3500 framework
Input voltage: 24V DC
Output voltage: inverter output voltage
Output power: 16kW
Frequency range: 0-400Hz
Maximum output current: 10A
Operating temperature range: -40℃ ~ +85℃
specification
Hardware components: including power supply, main processing module, bus interface module, communication module and I/O slot.
Processor specifications: Power PC dual-core processor, 800MHZ main frequency, with floating point coprocessor; 512MBytes memory, independent ECC memory.
Software composition: Configuration software Architect, compliant with IEC611131-2 standards, supports a variety of programming languages and protocols.
Size and weight
Size: 100mm x 50mm x 20mm
Type: Vibration monitor
Input voltage range: 12-48VDC
Output voltage range: 5VDC
Output current: Max. 10A
Efficiency: greater than 90%
CPU: 32-bit RISC processor
Size and weight
Dimensions: 170mm x 105mm x 32mm
Weight: About 120g
Input signal: Support -10 Vdc to +10 Vdc input signal.
Power consumption: 7.7 Watts.
Shaft power supply and sensor power supply: both -24 Vdc.
Operating temperature: Depending on the search results, the operating temperature may vary. One says it’s 25 degrees Celsius, another says it’s -20°C to +50°C, and still another says it’s 0°C to 55°C. The storage temperature range may be wider, such as -40°C to +70°C.
Resolution: In some specific applications, the resolution of temperature and humidity may be involved, such as temperature 0.1 ° C, humidity 0.1%RH.
Working current: ≤35mA (under 12V DC power supply condition).
Voltage range: The operating voltage may be 10V to 30V DC, or the input voltage range of 12-48VDC as mentioned in [3].
Size and weight
Size: According to the search results, there are two different size specifications. One is 9.50 x 4.50 x 1.00 inches (or similar) and the other is 263525mm. Note that these two sizes may work for different product versions or application scenarios.
Model: Bently 330130-040-00-00.
Input Voltage: 24VDC, 48VDC (may vary).
Output Voltage: 24VDC.
Input/Output: 20-90ACdc.
Operating Temperature Range: -40℃ ~ +85℃1 or -35°C to +85°C (for related products).
Frequency Response: 0-10kHz.
Function: It serves as an extension cable for industrial systems or mechanical protection systems, enabling data transmission between sensors and monitoring devices.
Weight and Dimensions:
Weight: Approximately 1.2kg1 or 1kg (may vary depending on sources).
Dimensions: 100mm x 50mm x 20mm.
Model: BENTLY 3500/92-01-01-00
Brand: BENTLY (also known as Bently Nevada)
Frequency Range: 100Hz
Frequency Stabilization: 90%
Input Voltage Range: 12-48VDC (as per similar modules in the series)
Output Voltage: 24V
Output Current: 1000A (note: this may vary depending on specific configuration)
Output Power: 1000W
It serves as a mechanical monitoring sensor, specifically a DC-LVDT (Linear Variable Differential Transformer) shell expansion sensor
Weight and Dimensions:
Specific weight and dimensions are not provided in the sources consulted. However, as a precision instrumentation component, it is likely to be compact and of manageable weight for installation and maintenance purposes.
Processor Type: PowerPC (some versions may feature a 32-bit RISC processor)
Processor Frequency: 266 MHz (specific values may vary with product updates; some versions may reach 1.2 GHz)
Memory: 128 MB RAM (some versions may have 4 MB RAM); 8 MB Flash memory
Dimensions and Weight:
Dimensions: Approximately 130mm × 80mm × 60mm (some versions may have dimensions of 190mm × 143mm × 33mm)
Weight: Approximately 0.5 kg (some versions may weigh around 800 grams or 7.85 kg, but 0.5 kg is more commonly reported)
Series:
Belongs to the Schneider Electric Quantum series or Modicon M340 series (depending on sources, but both point to Schneider Electric’s high-performance PLC series)
Features:
High Performance: Capable of handling large volumes of data and complex control tasks due to its fast processing speed and ample memory
– house in burgas: 500m
– part number: 176449-02
– compatibility: compatible with the bently 3500 series of systems
– input channels: 16 differential channels
– measuring range: -100 – +1000 mv
– sampling rate: 10 KHZ
– communication interface: Ethernet
Technical requirements:.
– power supply: 24 v dc
– operating temperature: -40 c to +70 c
– dimensions: 150mm x 100mm x 50mm
– weight: 500 g
