Model: MVI56-PDPMV1
Brand: ProSoft Technology
Type: PROFIBUS DP-V1 main network interface module
Compatible platform: ControlLogix
Communication mode: PROFIBUS DP-V1
Data transfer rate: 9600 bps to 12 Mbps
Number of nodes: Up to 31 (or up to 125 slave devices, depending on the description)
Connection type: 9-pin D connector
Communication protocol: Support for MODBUS serial /ASCII communication protocol, which is a widely used industrial automation communication standard.
Serial port:
Dual RS232 serial application port with support for RS232/RS485 and RS422 electrical standards.
The baud rate can be configured from 110 baud to 115.2 kbps.
Acceptable serial Settings include none, odd or even parity, data bits 5, 6, 7 and 8, stop bits 1 or 2, and RTS on/off delay of 0-65535 ms.
Ethernet Port: A debugging/configuration port in the form of an RJ45 Ethernet port, supporting 10/100 base-T transfer speeds, with link and active LED indicators and automatic cross-cable detection.
Installation: The MVI56E-MCMR is a single slot module that can be installed directly into any 1756 chassis.
Configuration tools: Use ProSoft Configuration Builder(PCB) and Product Discovery Service (PDS) to configure module operations and parameters.
Power requirements: 800 mA of available power from the Allen-Bradley ControlLogix processor and a 5-volt DC backplane power supply are required, along with an additional 3 mA of current from a 24-volt DC power supply.
Supports Modbus master/slave connections.
Provides flexible configuration options, including baud rate, data format, and addressing.
Offers high-speed communication capabilities for efficient data transmission between ControlLogix PLC and Modbus devices.
Supports redundancy to enhance system reliability.
Features diagnostics and status monitoring for real-time communication checks.
Compatible with 1756 ControlLogix® backplane.
Includes a 10/100 MB Ethernet port for network configuration and diagnostics.
User-definable module data memory mapping for up to 10,000 16-bit registers.
Weight: Approximately 2KG.
Dimensions: Specific dimensions are not mentioned in the provided information.
MODBUS Communication: Supports MODBUS serial/ASCII communication protocols.
Dual RS232 Ports: Equipped with dual RS232 serial ports that support RS232/RS485 and RS422 electrical standards.
Configurable Baud Rate: Baud rate can be configured from 110 to 115.2 kbps.
Flexible Serial Settings: Supports various serial settings such as parity check, data bits, and stop bits.
Ethernet Port: Features an RJ45 Ethernet port for network configuration and diagnostics.
Compatibility: Designed for use with Rockwell Automation ControlLogix Programmable Automation Controllers (PACs).
Ethernet Capability: Supports up to 20 Siemens S7 series PLCs (S7-200, S7-300, S7-400, S7-1200, and S7-1500) as Ethernet servers.
Data Transfer: Utilizes scheduled I/O data for faster updates and enhanced performance.
Port Speed: 10/100 Mbps auto-crossover detection for Ethernet configuration and application ports.
Communication Bridge: Acts as a communication bridge between ControlLogix PACs and Siemens S7 series PLCs.
Configuration Management: Uses ProSoft Configuration Builder (PCB) for graphical configuration and management of module profiles.
Weight: Specific weight is not detailed, but it is designed for industrial use and is likely to be lightweight for easy installation.
– model: miv08a-1-b5
– input voltage: 24v dc
– number of inputs: 8
– number of outputs: 8
– communication interface: Ethernet, rs-232
– operating temperature: -10 c to +55 c
– storage temperature: -20 c to +70 c
– dimensions: 100 mm x 80 mm x 35 mm
– weight: 50g
– input voltage: 5v dc
– current consumption: 500 ma
– operating temperature: -40 c to 85 c
– communication protocols: modbus TCP/IP
– network compatibility: Ethernet
– compact and durable design
– easy to install and configure
– supports up to 64 connections
– model: mvi69 – afc
– compatibility: compatible with allen-bradley compactlogix and controllogix PLCS
– communication protocols: modbus TCP/IP, Ethernet /IP
– input voltage: 24v dc
– operating temperature: -40 c to 70 c
– dimensions: 4.88″ x 3.54″ x 2.17″
– weight: 0.55 LBS
Dimensions: Length 5.2mm, Width 7.5mm, Height 1.9mm (Note: These dimensions may refer to a specific component or packaging, and may not represent the overall size of the gateway. For accurate gateway dimensions, please refer to official documentation.)
Weight: Approximately 2KG
Belongs to ProSoft Technology’s series of communication gateways designed for industrial automation.
Four Serial Ports: Supports connection to up to 400 Modbus devices, reducing the number of gateways required for an application.
SD Card Slot: For storing configuration files, facilitating disaster recovery and easy transfer of settings to another gateway if needed.
Specific dimensions and weight information may vary, but typically, the MVI56E-MCM module is compact and lightweight, suitable for installation in various industrial environments. Detailed dimensions and weight are recommended to be obtained from the manufacturer’s official documentation or product catalog.
Backward compatible with earlier MVI56 modules, allowing for direct replacement without altering existing controller programs.
Supports a wide range of Modbus function codes for data read/write and control operations.
Offers flexible data mapping and DP port operations for user convenience.
** product description **: prosoft 6105-wa-pdpsmodule – high performance module for industrial applications. It provides enhanced functionality and reliable performance for seamless integration into your industrial systems.
** product parameters **:
– model: 6105-wa-pdpsmodule
– compatibility: compatible with a wide range of industrial systems
– communication interface: Ethernet
– power supply: 24v dc
** specifications **:
– dimensions: 10 cm x 6 cm x 2 cm
– operating temperature: -40 c to 85 c
– certification: ce, rohs
