Operating voltage: 220V (based on search results)
Output frequency: 350kHz
I/O point: 120 (mentioned in some descriptions)
Supported PLC types: PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Supported CIP services: 0x4C-CIP data table read, 0x4D-CIP data table write, etc
The software can configure communication parameters, including baud rate, parity check, data size, stop bit, and so on
specification
Type: Modbus TCP/IP controller gateway to PROFINET
Mounting method: Separate DIN rail mounting module
Port: Provides two Ethernet ports for communication, remote configuration, and diagnosis
Onboard SD card slot: Used to store configuration files, support recovery, transfer of configuration files to another gateway, or general configuration backup
Supported protocols: Modbus RTU/ASCII, Modbus TCP/IP, EtherNet/IP, etc.
Configuration capability: Each MVI56E port can be configured as a host or slave.
Storage capacity: User-definable modular data memory mapping of up to 10,000 16-bit registers.
Network configuration: 10/100 MB Ethernet port for network configuration and diagnostics with automatic cable cross detection.
specification
Operating temperature: Designed for standard process applications, the MVI56E-MCMXT is designed for the Logix-XT control platform, allowing operation in extreme environments.
Compatibility: Backward compatible with previous MVI56-MCM versions, replacement can be done without changing existing controller programs.
Display and diagnosis: 4-character, scrolling, alphanumeric LED display displays status and diagnostic data in plain English.
argument
Power Supply:
Some versions support 24VDC.
Some versions support AC 100-240V, 50/60Hz.
Output voltage: DC 12V/3.3V (specific version).
Power: 50W (specific version).
Communication interfaces: RS-232, RS-485, Modbus TCP/IP, and TCP/IP (specific version).
specification
Shell material: metal material.
Size:
120mm x 80mm x 30mm
220mm x 180mm x 50mm
100mm x 80mm x 30mm
1.Parameters and Specifications:
3.Series:
1.Parameters:
–Supported Modbus Clients: Up to 3012
–Supported Modbus Servers: Up to 2012
–Ethernet Port: 1 x 10/100 Mbps Ethernet port1
–Power Consumption: 800mA at 5VDC or 3mA at 24VDC1
–Software Requirements: ProSoft Configuration Builder (PCB) for configuration12
2.Specifications:
–Model: MVI56E-MNETC12
–Brand: ProSoft Technology12
–Compatibility: Specifically designed for ControlLogix platforms12
–Memory: 10,000 words, 16-bit integers
–Parameters:
–Operating Voltage: 24V DC1
–Current Rating: 100-400A (Note: This range may refer to the compatibility or capabilities of the devices it controls rather than the gateway itself)1
–Specifications:
–Type: EtherNet/IP™ to PROFINET Controller Gateway2
–Control Capability: Allows EtherNet/IP™-based controllers to control up to 36 PROFINET RT devices, including field I/O, drives, HMIs, and controllers32
–Installation: Independent DIN rail mounting32
–Dimensions & Weight:
–Weight: Approximately 2KG
–Parameters:
–Voltage: 24V1
–Current: 100-400A1
–Memory Card Slots: 2 (SD card optional)12
–Specifications:
–Type: EtherNet/IP™ to PROFINET Controller Gateway2
–Control Capacity: Enables control of up to 36 PROFINET RT devices, such as field I/O, drives, HMIs, and controllers2
–Installation: Independent DIN rail mountable2
–Dimensions & Weight:
–Weight: Approximately 2KG
–Parameters:
–Functionality: It is an analog input/output module designed for industrial automation and control systems1.
–Communication Protocols: Supports multiple communication protocols, enabling seamless integration with various control systems and devices1.
–Specifications:
–Accuracy & Resolution: High precision and high resolution, ensuring accurate measurement and conversion of analog signals1.
–Input/Output Channels: Multiple analog input and output channels, allowing it to receive and transmit a wide range of signals1.