1. Parameters
Power consumption: Power consumption of 800VDC is 5mA, and power consumption of 3VDC is 24mA. There is also information that the 5VDC power consumption is 800mA, and the 24VDC power consumption is 3mA, which may vary depending on the specific configuration or version.
Version compatibility: Version 16 or later is required when used with additional directives (AOI/AOC); To use with the provided example ladder diagram program, version 15 or later is required.
Configuration tool: The ProSoft Configuration Builder (PCB) is required to input the configuration of the module.
Number of Modbus connections: Supports up to 30 Modbus clients and 20 Modbus servers.
Network port: Equipped with a single Ethernet communication port that supports 10/100 Mbps transmission rates and is able to detect the use of automatic crossover cables.
Server architecture: Demonstrates greater responsiveness in multi-server architectures, minimizing the impact on other servers when a server suddenly goes offline.
1. Parameters and specifications
Operating voltage: Depending on the application scenario, AN-X2-AB-DHRIO may support a variety of voltage inputs, such as 24VDC, 48VDC, etc.
Operating temperature: Generally supports a wide temperature range, such as -40°C to +85°C or 0°C to 50°C.
Communication interface: Supports a variety of communication interfaces, such as Ethernet and DH+.
Supported protocols: EtherNet/IP, Modbus TCP, DF1, DH485, ASCII, etc.
Data transfer rate: up to 10/100 Mbps.
Maximum number of nodes: Up to 64 DH+ nodes are supported in some configurations.
Power input: 24VDC, 48VDC, 220VAC/DC, etc., depending on the model and configuration.
argument
Operating power supply: Usually 24VDC, but other voltage ranges may be supported.
Input voltage: An input voltage range of 110-240V May be supported in some applications.
Output voltage: There may be multiple output channels, each with different output voltage and current capabilities, for example, the output current can reach 0-5A and the output voltage can reach 100V in some applications
Output power: 40W is mentioned in some applications.
Frequency range: 47-63 Hz.
argument
Voltage: 24V
Current: 100-400A
Memory card slots: 2 (SD card optional)
Panel protection level: 3
Number of server connections: Type 3
PLC type support: PLC2, PLC5, SLC, CLX, CMPLX, MICROLX
Number of client connections: Two type 3 clients are connected and one is not connected
Number of I/O connections: The number of Class 1 I/O connections is 2
Size and weight
Size: Depending on the search results, there are two different size data. One is 117mm x 43mm x 129mm and the other is 4.89 inches x 3.53 inches x 1.75 inches (i.e. 12.4cm x 9.0cm x 4.4cm).
Weight: 0.91kg, but please note that the exact weight may vary depending on the production batch and configuration.
argument
Data transmission rate: up to 10Mbps, ensuring efficient data transmission.
Operating temperature range: from -40℃ to +85℃, suitable for various harsh environments.
Operating voltage range: 9V to 36V DC.
Communication protocols: Support Modbus RTU protocol, and other possible communication protocols such as Modbus ASCII.
Baud rate: Set to 9600 (in the example), but can be adjusted as needed.
Data bit: 8 bits.
Stop bit: 1 bit.
Check method: even check (as the primary station) or no check (as the secondary station).
specification
Interface: RS-485 communication interface for data communication with other devices.
Data block size: Supports three different sizes of data blocks, which can be flexibly configured based on application requirements.
Size and weight
Size: Package/specification is 200mmx40mmx140mm
Number of clients: Up to 30 Modbus clients are supported
Number of Modbus servers: Up to 20 Modbus servers are supported
Communication rate: 10/100 Mbps transmission rate is supported
Power requirements:
The available 5VDC power consumption is 800mA
The power consumption of available 24VDC power supply is 3mA
specification
Compatibility: Especially compatible with Rockwell Automation’s ControlLogix platform
Occupied slot: Occupies a single slot in the ControlLogix chassis
Configuration tool: ProSoft Configuration Builder (PCB) is required to input the configuration of the module
Version requirements: Version 16 or later if used with additional instructions (AOI/AOC); To use with the provided example ladder diagram program, version 15 or later is required
argument
Protocol support: Modbus RTU/ASCII, DF1, ASCII, DH485, Modbus TCP/IP, EtherNet/IP, AB CSP, etc.
Communication mode: Support Modbus serial /ASCII communication, equipped with dual RS232 serial application port, support RS232/RS485 and RS422 electrical standards, baud rate can be configured from 110 baud to 115.2 kbps.
Debugging/Configuration port: With an RJ45 Ethernet port supporting 10/100 base-T transfer speeds, link and active LED indicators, and automatic cross cable detection.
specification
Type: Communication module, produced by ProSoft Technologies, one of Allen-Bradley’s partners.
Installation: Single-slot module that can be installed directly into any 1756 chassis.
Power requirements: Users must have an Allen-Bradley ControlLogix processor, a free slot in the rack for Modbus modules, and have 800 mA of available power and a 5-volt DC backplane power supply.
Size and weight
Size: Specific size information is not provided directly, but it can be inferred from the description of its installation as a single-slot module into the 1756 chassis that it is moderately sized.
Weight: approximately 2KG (based on the information provided [5], but please note that this may not be the exact value as the data source and context of [5] may vary).
Parameters and specifications
Communication protocol: Profibus DP, DP-V1.
Communication rate: Supports a variety of communication rates, including 9.6kBit/s, 19.2 kBit/s, 45.45kBit/s, 93.75kBit/s, 187.5kBit/s, 500kBit/s, 1.5MBit/s, 6MBit/s, and 12MBit/s.
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function. It is also said that the power supply is 5V DC, but this information may be related to the specific model or application environment.
Lightning protection, overcurrent and surge protection: with 4000V lightning protection and 1.5A overcurrent protection and 600W surge protection.
argument
Operating temperature range: The storage temperature range is -40°C to 85°C, and the operating temperature range is -40°C to 70°C in some documents, which should be based on the actual use environment and product manual.
Input voltage: 10-30 VDC.
Communication speed: 5 Mbps, in addition, the module also supports MODBUS serial /ASCII communication, the baud rate can be configured from 110 baud to 115.2 kbps.
Communication distance: 100 meters.
Communication protocol: CIP, but also support MODBUS communication protocol.
Function: As an input/output module that accesses processor memory to transfer data between the processor and the module
Size and weight
Size: The exact size may vary depending on product version or manufacturer update, but is usually close to the standard size of industrial automation modules.
Weight: Again, the specific weight is not provided directly, but considering that it is an industrial automation module, the weight should be moderate for easy installation and integration.
argument
Communication protocol: Profibus DPV1 protocol is supported, and data transmission can be carried out through Class 1 or Class 2 DPV1 services.
Data processing capability: Using high-performance processor and memory, fast data calculation and processing, to meet the needs of complex control algorithms and data processing.
Maximum number of slaves: Up to 125 slave devices can be connected.
Maximum data: up to 1536 bytes of input and 1536 bytes of output data.
specification
Type: Single slot module with one RS485 optical isolation Profibus interface.
Backplane compatibility: Compatible with 1756 backplane.
