argument
Communication protocols: Modbus TCP/IP, Allen-Bradley CSPv4, Ethernet/IP
Communication rate: 10/100 Mbps
Operating voltage: 10 ~ 30VDC
Operating temperature: -40°C ~ 85°C
specification
Product type: Network communication module
Type of application: Industrial automation and communications
System capability: Normal
Program capacity: 100K steps
Firmware version: V2.2.0 (may vary with product updates)
Size and weight
Dimensions: 11.2 x 9.1 x 2.5cm
Weight: 0.3kg
series
Flex I/O 1794 series
Input/output channels: There may be multiple digital or analog input/output channels, such as four digital input channels and four digital output channels.
Electrical parameters: such as input voltage range, output voltage, current, power, etc., the specific values of these parameters will vary according to the product model and application requirements.
specification
Hardware specifications: PTQ-PDPMV1 is usually equipped with a high-performance processor and large memory capacity for processing complex control algorithms and data. It may also be equipped with multiple communication interfaces, such as Ethernet, serial communication, etc.
Software specifications: The module is programmable, users can use the corresponding programming tools and languages to program and configure it to achieve customized control logic and functions.
Size and weight
Size: The exact size may vary from manufacturer to manufacturer, but there will usually be a certain standard size, such as the case size may be 120mm x 80mm x 30mm.
Power supply: 24 VDC, support PLC power supply or external power supply.
Power consumption: The maximum power is 3.5W, and it is also said that the power consumption is 2 watts.
Operating temperature: usually -40°C to +70°C, it is also said to be -20°C to 70°C.
Storage temperature: -40°C to 85°C.
Humidity: 5% to 95%RH, non-condensing.
specification
Interface type: Supports the Profibus DP protocol and provides RS-485 interfaces.
Configuration software: Equipped with ProSoft Configuration Builder software, to achieve convenient parameter configuration and diagnosis functions.
Size: 44mm × 118mm × 139mm
Weight: About 0.18kg
Communication protocol: Support PROFIBUS DPV1 protocol, compatible with IEC 61158 standard.
Baud rate: All standard baud rates are supported up to 12 Mbits/s.
Slave device support: Up to 125 slave devices are supported.
Data type: Supports quantum data types 3x and 4x.
Diagnostic capabilities: Support extended diagnostic data, alert indication and acknowledgement processing, multicast and broadcast messages (DPV1).
specification
Compatible programming software: Compatible with all common quantum programming packages, including Concept (2.6 or later), Unity Pro (2.2 or later), ProWORX (2.20 or later).
Configuration software: Includes ProSoft Configuration Builder (PCB) software for designing, configuring and monitoring the PROFIBUS network.
Module identification: It is identified as an option module and can access PLC memory.
Hot backup support: Each rack supports up to 6 PTQ-PDPMV1 modules (hot backup supports up to 4 modules).
argument
Voltage: Usually 24V, but may vary depending on the application environment and configuration
Current: The support range may be between 100-400A, but the specific current parameters need to be determined according to the actual configuration and application
specification
Type: MNETXT model in the MVI56E family, designed for Rockwell Automation’s ControlLogix processors
Protocol support: Support Modbus TCP/IP, EtherNet/IP and other network communication protocols
Environmental adaptability: Can operate in extreme temperature ranges (-25°C to 70°C) and has a coating that provides protection under harsh or corrosive conditions
Size and weight
Weight: Approximately 1.6kg to 2kg
argument
Communication protocols: Support Modbus TCP/IP, Allen-Bradley CSPv4, and Ethernet/IP.
Communication rate: 10/100 Mbps.
Operating voltage: 10 ~ 30VDC.
Operating temperature: -40°C ~ 85°C.
Voltage: It is said that the voltage is 24V, but the more specific parameters indicate that it is 10 ~ 30VDC.
Current: It is said that the current is 100-400A, but this information may not be accurate, as this current range seems too high for network interface modules. It is more likely to refer to the current load that the module can handle or a specific parameter associated with it.
specification
Series: Flex I/O 1794 series.
Weight: 0.3kg,
Dimensions: 11.2 x 9.1 x 2.5cm.
Communication protocol: Support for MODBUS serial /ASCII communication protocol, which is a widely used industrial automation communication standard.
Serial port:
Dual RS232 serial application port with support for RS232/RS485 and RS422 electrical standards.
The baud rate can be configured from 110 baud to 115.2 kbps.
Acceptable serial Settings include none, odd or even parity, data bits 5, 6, 7 and 8, stop bits 1 or 2, and RTS on/off delay of 0-65535 ms.
Ethernet Port: A debugging/configuration port in the form of an RJ45 Ethernet port, supporting 10/100 base-T transfer speeds, with link and active LED indicators and automatic cross-cable detection.
Installation: The MVI56E-MCMR is a single slot module that can be installed directly into any 1756 chassis.
Configuration tools: Use ProSoft Configuration Builder(PCB) and Product Discovery Service (PDS) to configure module operations and parameters.
Product type: Digital input module or master network interface module, depending on its application scenario and configuration.
Input/output: For digital input modules, multiple digital input channels are provided for receiving external digital signals. For network interface modules, a variety of communication protocols and interfaces may be supported, such as PROFIBUS, Ethernet, etc.
Operating temperature: Usually between -40°C and +85°C.
Storage temperature: Ranges from -40°C to +85°C are also supported.
Electrical parameters: May include input voltage range, current load, etc., depending on the configuration and purpose of the module.
Communication protocols: Support a variety of industrial communication protocols, such as PROFIBUS, Ethernet, etc., to facilitate integration with other devices and systems.
specification
Type: Communication module.
Brand: ProSoft Technology.
Manufacturer Software technology: Specifically designed for communication between Rockwell Automation ControlLogix processors and Modbus master/slave devices.
Size and weight
Size: Net length 1920mm, net height 920mm, net width 69mm
Weight: Net weight 1.6kg
