Parameters and specifications
Processor:
The Artesyn MVME7100 uses an MPC864xD processor with a dual-core e600 processor core at up to 1.3GHz.
Another claim is that it uses a 1.3GHz PowerPC 604e processor, but considering the latest information, the MPC864xD is more accurate.
Memory:
Up to 2GB DDR2 ECC memory.
Memory options ranging from 1GB to 4GB are sometimes available.
Storage:
128MB NOR flash, and optional 2GB, 4GB or 8GB NAND flash.
Communication interface:
Four Gigabit Ethernet ports.
VMEbus, RS-232, RS-485, Ethernet and other communication interfaces.
Other features:
Supports USB 2.0 port.
Dual 33/66/100 MHz PMC-X interface, extensible with industry standard modules.
Processor: Based on the MPC7455 or MPC7457 1GHz CPU, it provides powerful processing power.
Memory: Equipped with 512MB ECC SDRAM memory to ensure high-speed data transmission and stability.
Cache: May have 512 KB on-chip L2 cache and 2 MB level 3 cache (may vary depending on the model).
specification
Communication capability: Supports Gigabit E-NET connectivity, providing high-speed and stable network communication capability.
Interface: Dual Peripheral Component Interconnect (PCI) and PMC(Peripheral Component Interconnect) interfaces for easy connection and expansion with other devices.
Operating system and development tools: Support a variety of operating systems and development tools, easy for users to develop and maintain.
argument
Communication protocols: Support ModBus TCP/IP, ModBus RTU, OPC UA and other communication protocols.
Interface capabilities: With multi-channel analog input and output capabilities, you can receive analog input signals from different sensors or signal sources, and support a variety of output types.
Counting function: Usually with pulse counting and high-speed counting capabilities, you can accurately count the number of pulses received by the input channel to achieve the measurement and monitoring of parameters such as motion, speed, flow.
specification
Function: Mainly used to build a complete API 670 standard device protection monitoring system, capable of reading the parameters of all modules of the CSI A6500 ATG and output these parameters via ModBus TCP/IP or ModBus RTU.
Application: Widely used in turbine, gas turbine, compressor and hydraulic turbomachinery and other rotating equipment protection monitoring system.
Flow range: For some applications (such as ultrasonic flowmeters), the flow range may be 0-10 m/s.
Voltage: The voltage range may include 100-240VAC, 50/60Hz, and 24V DC voltage is also mentioned.
Outputs: Outputs may include 4-20mA, RS485 Modbus, relays, etc.
Sensor power supply: For mechanical health monitoring systems, the sensor power supply may be open/short circuit protected, nominal voltage -23.25V / -26.0V DC, available current nominal 20mA, maximum 35mA.
specification
Size: The A6500-UM may be a dual-channel, 3U, single-slot plug-in module, saving half of the cabinet space compared to the traditional four-channel, 6U card.
Display: For some models, a 2×16 LCD display may be available.
Parameters and specifications
Flow range: 0-10 m/s (in some contexts, this may refer to the A6500-UM as a parameter for ultrasonic flowmeters)
Pipe size: 1/2 “- 240” (again, this may be for flow measurement applications)
Accuracy: +/- 1% (accuracy of flow measurement)
Temperature range: -40°C to 150°C
Power Supply: 100-240VAC, 50/60Hz
Output: 4-20mA, RS485 Modbus, relay
Display: 2×16 LCD
Ultrasonic frequency: 1MHz or 500KHz (for flow measurement)
Measurement period: 1 second (default)
Protection Class: IP67 (sensor), IP65 (transmitter)
Communication protocols: Modbus RTU, M-Bus, BACnet, LonWorks, Profibus DP
Flow range: Although this is usually associated with flowmeters, it may refer here to a certain range or sensitivity for vibration monitoring, but the specific parameters are not directly given.
Accuracy: High precision shaft vibration measurement, possible to achieve ±1% accuracy.
Temperature range: -40°C to 150°C.
Power Supply: 100-240VAC, 50/60Hz.
Output: 4-20mA, RS485 Modbus, relay.
Display: 2×16 LCD.
Ultrasonic frequency: 1MHz or 500KHz (this may refer to a specific model of ultrasonic flowmeter, not a shaft vibration monitor).
Size: For shaft vibration monitors, the size may vary depending on the specific model, but a universal measuring card may have a specific size, such as 263337mm (possibly referring to module size).
