TRICONEX 2201 Product Parameters, Specifications, and Application Areas
Product Parameters:
Brand: TRICONEX
Model: 2201
Product Type: Safety Relay Module
Specifications:
Number of Relays: The total number of relays integrated into the module.
Relay Types: The types of relays used, such as normally open, normally closed, or form C (changeover).
Operating Voltage: The voltage range required for the normal operation of the relay module.
Switching Capacity: The maximum current and voltage that the relays can switch safely.
Operating Temperature: The range of temperatures within which the relay module can operate reliably.
Certifications: Safety certifications or standards that the module has been tested and approved to meet.
Product Parameters, Specifications, and Application Areas:
1. Overview:
The TRICONEX 3503 is a safety instrumented system (SIS) module from the TRICONEX family of products. It is designed for use in safety-critical applications in the process industries, where fail-safe behavior is essential. The module provides high-integrity protection against potential hazards, ensuring the safety of personnel and equipment.
Product Parameters, Specifications, and Application Areas:
1. Overview:
The TRICONEX 3721 is a safety instrumented system (SIS) controller from the TRICONEX family of products. It is specifically designed for use in safety-critical applications where high reliability and fail-safe behavior are paramount. The 3721 controller provides a redundant architecture, ensuring continuous operation and protection in the event of a failure.
TRICONEX 4351B: Product Parameters, Specifications, and Application Areas
1. Overview:
The TRICONEX 4351B is a safety instrumented system (SIS) module from the TRICONEX family of products. It’s designed to monitor and protect against unsafe process conditions in critical applications within the process industries. The 4351B module provides high reliability and fail-safe behavior, ensuring the safety of personnel and equipment.
Powerful. The module has an analog input function, which can convert the analog signal generated by the external sensor into a digital signal, and pass the data to the control system for processing through the communication interface
Widely used. It is suitable for industrial automation, process control, energy management, building automation and transportation systems
Processor: 32-bit RISC processor.
Memory: 256MB SDRAM, 32MB Flash.
I/O count: up to 2048 points.
Communication: Modbus, PROFIBUS, Ethernet /IP, etc.
Operating temperature: -40℃~70℃.
Power supply voltage: 24VDC.
Number of I/ OS supported: up to 480 digital inputs/outputs or analog inputs/outputs.
Maximum number of control panels supported: 2.
Maximum number of analog inputs/outputs supported: 192.
Maximum number of digital inputs/outputs supported: 480.
Product size: 483×133×406mm.
Type: processor module
Use: Used in industrial mastery systems, especially in situations requiring highly reliable safety mastery, such as chemical, kerosene and natural gas, electricity and other important fundamental steps
Safety control: It is used to monitor and grasp the safety chaos and emergency situations in the industrial process, and can implement the safety logic of the crux to ensure the safety of the process operation.
The parameters of the TRICONEX 2481 are as follows:
Number of ports: 8
Addressing mode: The eight ports can be addressed on 8-bit, 16-bit, or 32-bit boundaries. A CSR can be addressed on an 8-bit boundary. 13 jumpers provide infinitely short data input/output address mapping options
Differential signal input characteristics: common-mode input voltage ranges from -30 to +66V. The input sensitivity is ±100mV in a common model range of -7 to +12V. The high input impedance is 33 kω
Single-ended signal input characteristics: High input impedance is 33kΩ
Threshold accuracy: The threshold accuracy of the entire system is 1%
Triconex 3511 is a high-performance I/o module designed for use in critical security applications. It is specifically designed to provide reliable and accurate data and monitoring capabilities.
** product parameters :**
– input voltage: 24v dc
– output voltage: 24v dc
– operating temperature: -20 c to 70 c
– communication protocol: modbus TCP/IP
– number of inputs: 16
– number of exits: 16
Input voltage: 24v dc (prosoft plx31-eip-ascii4) or 100-240v ac (abb sper 1c1).
Output voltage: 24v dc.
Maximum output current: 2a (prosoft plx31-eip-ascii4) or 5a (abb sper 1c1).
Temperature range: -40 c to 85 c (prosoft plx31-eip-ascii4) il-20 c 60 c (obb will go sper 1c1).
Dimensions: 110 mm x 80mm x 30mm (prosoft plx31-eip-ascii4) or 120mm width 74mm x and 100mm height (abb sper 1c1).
Triconex 3481 provides seamless integration with different systems and devices, allowing for effective control and control. It is equipped with robust functions and functionality to ensure safe and secure operation in challenging environments.
Product parameters (s)
– model: triconex 3481
– power supply: 24v dc
– connection: Ethernet, modbus
– input/output: digital, analog
– operating temperature: -40 c to 85 c
