Description
Product Parameters
| Parameter | Specification |
|---|---|
| Brand / Series | GE Mark VIe Speedtronic |
| Model | IS200TRPAS1A |
| Transducer Power Channels | 32 isolated channels — upgraded from 16 channels |
| Output Voltage | 24 VDC (regulated, programmable per channel) |
| Output Current | 50 mA per channel (1.6 A total maximum) |
| Input Voltage Range | 24/48/125 VDC (auto-ranging, from Mark VIe rack) |
| Voltage Regulation | ±0.1% |
| Ripple/Noise | < 10 mV peak-to-peak |
| Isolation | 2000 VAC (channel-to-channel and field-to-system) — upgraded from 1500 VAC |
| Diagnostics | Overcurrent detection, short-circuit detection, under/over-voltage monitoring, open-circuit detection, reference validation |
| Status Indication | 32 green LEDs (channel active), 32 red LEDs (channel fault), 2 red summary fault LEDs, 1 yellow LED (reference/calibration status) |
| Operating Temperature | –40°C to +70°C — upgraded from –30°C to +65°C |
| Storage Temperature | –55°C to +85°C |
| Mounting | VME rack-mount terminal board with front-panel I/O connectors |
| Backplane Interface | VME64x (A24/A32, D16/D32/D64) |
| EMC Compliance | IEC 61000-4 Level 4 |
Advantages & Key Features
-
Maximum Channel Density: 32 isolated transducer power channels in a single VME slot—double the density of IS200TRPAH1AFB (16 channels) and four times that of competing modules. Ideal for large turbine systems with extensive transducer power requirements.
-
Programmable Output Voltage: Per-channel adjustable 24 VDC output via GE ToolboxST.
-
Extended Temperature Range: –40°C to +70°C operation makes IS200TRPAS1A suitable for extreme environments.
-
Enhanced Isolation: 2000 VAC isolation provides superior protection for the Mark VIe backplane.
-
Comprehensive Diagnostics: Overcurrent, short-circuit, under/over-voltage, open-circuit, and reference validation per channel.
-
High-Density Status Indication: 32 green/red LEDs enable rapid on-site troubleshooting.
-
ToolboxST Integration: Full configuration, monitoring, and diagnostics via GE ToolboxST.
-
Drop-In Replacement: Direct replacement for IS200TRPAH1AFB, IS200TRPAH1A, and earlier transducer power terminal boards.
Application Fields
-
Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Powering pressure transmitters for fuel gas, lube oil, cooling water; temperature transmitters; position transducers for control valves.
-
Combined Cycle Plants: Powering HRSG pressure and temperature transmitters.
-
Compressor Stations: Powering suction/discharge pressure transmitters and temperature transmitters.
-
Aeroderivative Turbines: Powering fuel flow, oil pressure, and temperature transmitters.
-
Arctic & Desert Installations: Extreme-environment transducer power applications with high channel count.
-
Offshore Platforms: Marine enclosures with salt-spray and wide temperature swings.
Comparison with Competing Products
| Feature | GE IS200TRPAS1A | GE IS200TRPAH1AFB (16-ch) | GE IS200TRPAH1A (16-ch) | Competitor A (Transducer Power) | Competitor B (Power Supply) |
|---|---|---|---|---|---|
| Power Channels | 32 isolated | 16 isolated | 16 isolated | 8 isolated | 8 non-isolated |
| Output Current | 50 mA/channel | 100 mA/channel | 50 mA/channel | 40 mA/channel | 50 mA/channel |
| Voltage Regulation | ±0.1% | ±0.05% | ±0.1% | ±1% | ±0.5% |
| Diagnostics | Overcurrent, short, under/over-voltage, open, reference | Overcurrent, short, under/over-voltage, open, reference | Overcurrent, short, under/over-voltage, open | Overcurrent only | Overcurrent only |
| Isolation | 2000 VAC | 2000 VAC | 1500 VAC | 1000 VAC | 500 VDC |
| Operating Temp | –40°C to +70°C | –40°C to +70°C | –30°C to +65°C | 0°C to 50°C | 0°C to 60°C |
| Reference Validation | Yes | Yes | No | No | No |
Key Advantage: IS200TRPAS1A delivers 32 isolated transducer power channels—double the density of IS200TRPAH1AFB and four times that of competing modules—with 2000 VAC isolation, extended –40°C to +70°C temperature range, and comprehensive diagnostics including reference validation, making it the premier solution for large turbine systems requiring high-density transducer power in extreme environments.
Selection Guidelines & Recommendations
-
Channel Count: Determine number of transducers requiring power—up to 32 per board.
-
Output Voltage: Configure per-channel output voltage (default 24 VDC) in GE ToolboxST.
-
Current Requirements: Verify each transducer’s current draw does not exceed 50 mA per channel.
-
Diagnostic Configuration: Enable overcurrent, short-circuit, and reference validation for critical transducers.
-
Controller Firmware: Requires Mark VIe processor firmware v9.0 or later.
-
Wiring Guidelines: Use shielded twisted-pair cables. Maintain shield grounding only at the Mark VIe cabinet end.
-
Spare Strategy: Keep one spare per turbine; lead times 8–12 weeks.
-
Retrofit: Direct replacement for IS200TRPAH1AFB and IS200TRPAH1A—regenerate configuration in GE ToolboxST for 32-channel mapping.
Important Cautions
-
No Hot-Swap: De-energize rack before insertion/removal.
-
Power Polarity: Observe correct polarity for transducer connections—reverse polarity may damage field devices.
-
Current Limit: Do not exceed 50 mA per channel—overcurrent protection will trip and latch.
-
Short-Circuit: If a short is detected, the channel will latch off. Clear the fault and reset via GE ToolboxST.
-
Grounding: Connect AGND to Mark VIe system ground at single star point.
-
Shield Termination: Ground transducer cable shields only at cabinet end.
-
ESD Handling: Use grounded wrist straps; field repair not possible.
-
Temperature Rating: Verify cabinet ambient does not exceed +70°C or fall below –40°C.
-
Reference Validation: Yellow LED indicates reference drift—schedule factory recalibration if illuminated.
-
Voltage Verification: Verify transducer voltage requirements before powering up.
-
Channel Mapping: With 32 channels, verify field wiring maps to correct ToolboxST channel numbers.
-
Wiring Density: With 32 transducer power connections, ensure adequate cabinet space and cable management to maintain proper airflow.
п OP032
A-B 1756-IF16
A-B 1746-NO4I
A-B 1746-NI8
Reviews
There are no reviews yet.