Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200HFPAG1A |
| Pulse Inputs | 4–8 high-frequency pulse inputs (speed sensors, encoders) |
| Pulse Outputs | 4–8 high-frequency pulse outputs (actuator control, synchronization) |
| Frequency Range | 0 Hz to 100 kHz (typical) |
| Signal Processing | Amplification, filtering, pulse shaping, frequency multiplication/division |
| Communication Interfaces | 2× configurable ports (RS-485 / fieldbus) |
| Supported Protocols | Modbus RTU, GE pulse protocols |
| Control Functions | Speed sensing, position feedback, pulse generation for actuators |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 108,000 hours |
| Revision Note | “A” suffix = specific hardware/firmware configuration |
Advantages and Key Features
Dedicated High-Frequency Pulse Amplifier/Generator: The IS200HFPAG1A provides high-speed pulse signal processing for demanding control applications.
Wide Frequency Range: Supports frequencies up to 100 kHz for high-speed sensing and control.
Multiple Input/Output Channels: Handles 4–8 pulse inputs and outputs.
Signal Conditioning: Built-in amplification, filtering, and pulse shaping.
Application Fields and Case Studies
Used in high-speed speed sensing and position feedback, pulse generation for actuator control, and synchronization applications. In a 600 MW plant, the IS200HFPAG1A provided high-frequency pulse signals for speed sensing and actuator control.
Comparison with Competing Products
| Dimension | IS200HFPAG1A | IS200EGPAG1ABD | IS200GGXIG1AED |
|---|---|---|---|
| Primary Function | Pulse amplifier/generator | Pulse amplifier | Transducer + gateway |
| Frequency Range | 0–100 kHz | 0–20 kHz | N/A |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200HFPAG1A for high-frequency pulse amplification and generation in speed sensing, position feedback, or actuator control applications. Verify compatibility with your specific sensors and actuators. Deploy for high-speed control requirements.
Precautions and Important Notes
Use ESD-safe handling. Verify field wiring and pulse connections. Confirm compatibility with your specific sensors and actuators. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix variants in redundant pairs. Allow 30 seconds boot time. Test all pulse generation and amplification functions during commissioning. The IS200HFPAG1A is valuable for high-speed applications – ensure all frequency and timing settings are correctly configured. Ensure proper shielding for high-frequency pulse signals to avoid noise interference. Verify that pulse cabling does not exceed maximum recommended length.
GE THED136100WL
Honeywell MC-PAIH03
PHOENIX IBS S7 400 DSC/I-T
EPSON SKP326-2
Reviews
There are no reviews yet.