Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200EPDMG1BAA |
| Communication Interfaces | 2× configurable ports (RS-485 / fieldbus) |
| Supported Protocols | Modbus RTU, DNP3, GE proprietary protocols (variant-specific) |
| Power Distribution Functions | Breaker monitoring, power quality, switchgear coordination |
| Motor Control Functions | Start/stop, status monitoring, protection coordination |
| Supported Equipment | Motor control centers, switchgear, breakers, power meters (specific families) |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 110,000 hours |
| Suffix Meaning | “BAA” = specific firmware/configuration for different equipment families |
Advantages and Key Features
Combined Power Distribution and Motor Gateway with Variant-Specific Firmware: The IS200EPDMG1BAA integrates both power distribution monitoring and motor control functions, with the “BAA” firmware optimized for specific switchgear or MCC equipment families.
Breaker and Switchgear Interface: Provides direct communication with specific breaker types and switchgear architectures.
Motor Control Integration: Enables start/stop and status monitoring of auxiliary motors with compatibility for specific MCC protocols.
Multi-Protocol Support: Supports Modbus RTU and DNP3 with variant-specific optimizations.
Pre-Configured Firmware: “BAA” firmware reduces commissioning time for specific equipment.
Application Fields and Case Studies
Used in combined-cycle plants with specific switchgear or MCC equipment requiring the “BAA” firmware variant. In a 500 MW plant with a particular MCC manufacturer, the IS200EPDMG1BAA was selected for its compatibility with the site’s specific breaker and motor control communication profiles, reducing integration time.
Comparison with Competing Products
| Dimension | IS200EPDMG1BAA | IS200EPDMG1AAA | IS200EMCSG1AAB |
|---|---|---|---|
| Primary Function | Power distribution + motor | Power distribution + motor | Motor gateway |
| Firmware Variant | BAA (specific equipment) | AAA (different equipment) | AAB (motor-specific) |
| Equipment Support | Specific families | Different families | Motor-only |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200EPDMG1BAA when your switchgear, breakers, or MCC equipment require the “BAA” firmware variant. Select over IS200EPDMG1AAA when compatibility with specific equipment families is required. Verify “BAA” firmware matches your equipment before commissioning. For standard applications, IS200EPDMG1AAA may be sufficient.
Precautions and Important Notes
Use ESD-safe handling. Verify communication wiring and settings. Confirm “BAA” firmware supports your specific switchgear and MCC equipment. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix IS200EPDMG1BAA with IS200EPDMG1AAA in redundant pairs without verifying identical firmware. Allow 30 seconds boot time. Test both power monitoring and motor control functions during commissioning. If replacing an IS200EPDMG1AAA with a IS200EPDMG1BAA, verify all equipment is compatible with the new firmware before installation.
A-B SK-G9-PB1-D156
NI SCXI-1125
MILLIPORE MDVX-018S01
A-B 1769-IF16C
Reviews
There are no reviews yet.