Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200EISBH1AAB |
| Series | Mark VI / Speedtronic™ |
| Board Type | Enhanced I/O Scanner / Bus Highway Interface |
| I/O Scanning Channels | Supports up to 1024 digital I/O points and 256 analog I/O points (depending on configuration) |
| Communication Interfaces | 2× bus highway ports (GE proprietary bus protocol) |
| Supported Protocols | GE proprietary bus highway protocol (variant-specific), Modbus RTU |
| Data Transfer Rate | Up to 10 Mbps (depending on configuration) |
| Scanning Rate | Configurable scan rates (10 ms to 500 ms typical, variant-dependent) |
| Onboard Processing | Standard processor with I/O scanning and bus interface firmware (AAB variant) |
| I/O Support | Digital inputs/outputs, analog inputs/outputs, thermocouple inputs, RTD inputs |
| Communication Modes | Master/Slave, Scanner/Remote I/O |
| Distributed I/O Support | Remote I/O racks, distributed terminal boards, expansion chassis |
| Backplane Interface | VME bus (P1/P2 connectors) |
| Power Requirements | +5V DC / 2.5A, ±15V DC / 0.5A |
| Operating Temperature | -30°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| MTBF | > 110,000 hours |
| Suffix Meaning | “AAB” = specific firmware/application configuration for different I/O module families or scanning priorities |
Advantages and Key Features
Dedicated I/O Scanning with Variant-Specific Firmware: The IS200EISBH1AAB provides dedicated, high-speed scanning and data acquisition from distributed I/O systems, with the “AAB” firmware variant specifically configured for compatibility with certain I/O module families, scanning priorities, or bus highway architectures.
Configurable Scanning with Priority Optimization: The “AAB” firmware on the IS200EISBH1AAB includes pre-configured scanning priorities, optimizing for faster critical analog loop scanning or digital event capture, reducing commissioning time.
High I/O Capacity: Supports up to 1024 digital and 256 analog I/O points, making it suitable for complex turbine installations with extensive I/O requirements.
Flexible I/O Module Support: The IS200EISBH1AAB supports different I/O module families than the IS200EISBH1AAA, allowing system designers to select the correct scanner for their specific I/O hardware.
Comprehensive Diagnostics: Onboard diagnostics include bus communication status, I/O point health monitoring, scanning error counting, and fault reporting.
Application Fields and Case Studies
The IS200EISBH1AAB is used in GE gas and steam turbine installations with specific I/O module families requiring variant-specific scanning, combined-cycle plants requiring optimized scanning priorities for critical control loops, and facilities with specific bus highway architectures. In a 500 MW combined-cycle plant, the IS200EISBH1AAB was deployed to scan and manage over 600 I/O points with specific module types that required the “AAB” firmware for correct communication timing and priority. The board’s optimized scanning priorities ensured that critical analog loops were scanned at 10 ms intervals while slower monitoring points were scanned at 100 ms intervals, optimizing system performance. The “AAB” firmware on the IS200EISBH1AAB was pre-configured for the site’s specific I/O module families, reducing commissioning time by 2 days.
Comparison with Competing Products
| Dimension | IS200EISBH1AAB | IS200EISBH1AAA | IS200EBRGH2ABA | Generic I/O Scanner |
|---|---|---|---|---|
| Primary Function | I/O scanner/bus highway | I/O scanner/bus highway | Remote I/O gateway | Non-native |
| Firmware Variant | AAB (specific modules) | AAA (different modules) | GE remote I/O | Various |
| I/O Module Support | Specific module families | Different module families | Limited | Varies |
| Scanning Priorities | Optimized (specific) | Standard | Fixed | Varies |
| VME Integration | Direct (Mark VI native) | Direct (Mark VI native) | Direct (Mark VI native) | External |
| Diagnostics | Comprehensive + variant-specific | Comprehensive + variant-specific | Comprehensive + node-specific | Basic |
The IS200EISBH1AAB offers the same hardware capabilities as the IS200EISBH1AAA but with different firmware optimization for specific I/O module families or scanning priorities. The “AAB” variant is preferred when your I/O hardware requires that specific firmware version.
Selection Recommendations
Choose the IS200EISBH1AAB when your Mark VI installation requires I/O scanning with specific I/O module families that require the “AAB” firmware variant. Select it over the IS200EISBH1AAA when compatibility with specific I/O hardware or optimized scanning priorities is required. Deploy redundant IS200EISBH1AAB boards for critical I/O scanning paths. Verify that your I/O modules are compatible with the “AAB” firmware before commissioning. Consult GE documentation to confirm which suffix variant is recommended for your specific I/O equipment.
Precautions and Important Notes
Always use ESD-safe handling procedures when installing the IS200EISBH1AAB. Verify bus highway cable quality and termination. Configure with correct scanning rates, addressing, and I/O configurations. Verify that the preloaded “AAB” firmware supports your specific I/O modules before commissioning. Never interrupt firmware updates. The IS200EISBH1AAB draws 2.5A (+5V) – verify rack power supply capacity. Document all I/O configurations and scanning settings before board replacement. Store spare boards in anti-static packaging and rotate inventory every 24 months. Do not mix IS200EISBH1AAB with IS200EISBH1AAA in redundant pairs without verifying identical firmware. Consult GE engineering when integrating the IS200EISBH1AAB with non-standard I/O architectures. Allow the IS200EISBH1AAB to complete its boot sequence (approximately 30 seconds) before relying on I/O data. Verify that bus highway cabling does not exceed maximum recommended length. Ensure all remote I/O racks are properly terminated and addressed. If replacing an IS200EISBH1AAA with an IS200EISBH1AAB, verify that all I/O modules are compatible with the new firmware before installation. Thoroughly test all I/O points after replacement to ensure correct scanning and data integrity.
WESTINGHOUSE 1B30035H01
GE 12HFA51A42H
GE IC200ALG326
WESTINGHOUSE 1C31224G01
Reviews
There are no reviews yet.