GE DS3820PSFC

Key Parameters

• Channels: 4 isolated analog inputs

• Sensor Type: Pt100 (2‑wire, 3‑wire, or 4‑wire – software‑configurable per channel)

• Resolution: 24‑bit ADC

• Accuracy: ±0.05°C (Pt100, 25°C); ±0.2°C over –40°C to +70°C

• Excitation Current: Software‑selectable 0.1 mA, 0.5 mA, 1 mA (per channel)

• Lead Resistance Compensation: Automatic for 3‑wire and 4‑wire configurations

• Measurement Range: –200°C to +850°C

• Sampling Rate: Up to 200 Hz per channel (high‑speed mode; filtering disabled)

• EMC/Noise Rejection: Enhanced CMRR > 120 dB, built‑in 50/60 Hz digital filtering (reduces speed when enabled)

• Diagnostics: Open‑circuit detection, short‑circuit detection, over‑range/under‑range, signal‑loss detection, per‑channel LED status

• Isolation: 1500 V RMS (field‑to‑backplane); 500 V RMS between channels (per‑channel isolation)

• Terminal Type: Screw‑type – per suffix “C”

• Power: 24 V DC backplane power, ≤4.5 W

• Operating Temperature: –40°C to +70°C

Advantages

• Fast sampling (200 Hz) – captures rapid temperature changes; ideal for dynamic processes, engine testing, and thermal transient analysis.

• Enhanced noise immunity – CMRR > 120 dB and advanced digital filtering; ideal for installations near VFDs, inverters, and high‑power switching equipment.

• Premium accuracy – ±0.05°C; high precision for demanding applications.

• 24‑bit resolution – provides superior measurement fidelity.

• Per‑channel isolation – 500 V between channels; prevents ground loops and cross‑channel interference.

• Automatic lead compensation – for 3‑wire/4‑wire RTDs, cancels lead resistance errors for accurate temperature readings.

• Software‑configurable per channel – wire configuration and excitation current independently settable.

• Built‑in linearization – provides direct temperature readout in °C or °F; no scaling required.

• Enhanced diagnostics – includes signal‑loss detection for proactive maintenance.

• Open/short detection – detects broken wires or sensor shorts instantly.

• Hot‑swappable – replace without rack power‑down.

• Wide measurement range – –200°C to +850°C covers most industrial applications.

Applications

• VFD‑controlled motor systems – bearing and winding temperature monitoring near variable frequency drives with fast response

• Engine testing – rapid exhaust and component temperature monitoring in automotive and aerospace

• Turbine monitoring – high‑speed temperature profiling in power generation near high‑EMI equipment

• Induction heating – fast‑response temperature monitoring for heat treatment

• Steel mills & foundries – dynamic temperature monitoring near high‑power equipment

• Rapid thermal processing (RTP) – semiconductor wafer temperature control with fast transients

• Research & development – dynamic thermal analysis in high‑EMI labs

• Packaging machinery – high‑speed sealing bar temperature monitoring

Competitor Comparison

The DS3820PSFC is the fast‑sampling, EMI‑hardened Pt100 input module with 200 Hz per channel and CMRR > 120 dB. Compared to the DS3820PSFA (also 200 Hz, standard noise rejection), it adds superior EMI immunity – critical for installations near VFDs and high‑power equipment. Against standard Pt100 modules (10 Hz, 16‑bit), it offers superior speed (20× faster), resolution (24‑bit), diagnostics, and noise immunity. For applications requiring fast temperature transient capture, high precision, and high noise immunity in high‑EMI environments, the DS3820PSFC delivers the best‑in‑class solution.

Selection Tips

• Choose DS3820PSFC when you need fast temperature measurement (up to 200 Hz) with high precision (±0.05°C) and superior EMI noise immunity.

• Ideal for VFD‑heavy installations, engine testing, turbine monitoring, induction heating, and RTP applications.

• For maximum speed (200 Hz), disable input filtering – enabling 50/60 Hz rejection reduces sampling rate.

• Verify the wire configuration (2‑wire, 3‑wire, or 4‑wire) – software‑configurable per channel.

• For 2‑wire sensors, lead resistance adds error – use 3‑wire or 4‑wire for accurate measurements.

• Not suitable for Pt1000, Ni RTDs, or thermocouples – use dedicated modules.

• Ensure your PLC/DCS can handle the data throughput from DS3820PSFC at 200 Hz.

Precautions

• Sampling rate vs. filtering: Maximum 200 Hz achieved with filtering disabled. Enable filtering only if noise rejection is required – it will reduce the sampling rate.

• Lead resistance: For 2‑wire sensors, lead resistance directly adds error – use 3‑wire or 4‑wire for accurate measurements. The DS3820PSFC compensates for 3‑wire/4‑wire automatically.

• Excitation current: Higher currents (1 mA) produce self‑heating errors in small Pt100 elements – use 0.1 mA or 0.5 mA for sensitive sensors.

• Wiring: Use shielded twisted‑pair cables; ground shield at module end only. Enhanced EMI protection requires proper grounding to achieve >120 dB CMRR.

• Data throughput: 200 Hz × 4 channels × 24‑bit data requires significant communication bandwidth – ensure your PLC/DCS can process the data rate.

• Signal‑loss detection: Requires minimum sensor impedance – very low‑impedance sensors may not trigger detection.

• Power sequencing: Apply backplane power before field power.

• Calibration: Perform periodic calibration using precision resistors to maintain accuracy – high‑speed operation may accelerate drift.

• Spare: Keep one spare DS3820PSFC for critical high‑speed loops – the EMI‑hardened fast‑sampling variant may have longer lead times.