Description
Technical Parameters & Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Series | Mark V Speedtronic |
| Full Model | DS200LRPAG1A |
| Board Type | Low Range / Precision Amplifier Gateway Board |
| Analog Inputs | 8 isolated low range analog inputs (±10mV to ±10V or 4-20mA) |
| Amplifier Outputs | 4 precision amplified outputs (0-10V or 4-20mA) |
| Digital Inputs | 8 optically isolated digital inputs (24-250V DC/AC) for status signals |
| Digital Outputs | 8 optically isolated digital outputs (24-250V DC/AC) for control signals |
| Communication Ports | 1 serial port (RS-232/RS-485) for device communication, 1 Ethernet port (10/100) |
| VME Interface | VME backplane (parallel data transfer) |
| Amplifier Gain | Programmable gain (1 to 20000, increased) |
| Accuracy | ±0.005% of reading (improved) |
| Resolution | 20-bit (analog inputs, increased) |
| Diagnostics | System status, signal integrity, communication health, fault detection, predictive maintenance alerts |
| Diagnostic LEDs | Board status, fault, signal active, communication active, signal quality |
| Operating Temp | -40°C to +70°C (extended range) |
| Protection | Enhanced conformal coating + gold-plated edge connectors (30µin) |
| Physical Dimensions | 6U VME format (233mm × 160mm) |
| MTBF | > 120,000 hours |
Core Advantages & Key Features
-
Low Range Precision Amplification – The DS200LRPAG1A provides high-precision amplification for low range analog signals used in turbine control applications.
-
Higher Accuracy – ±0.005% accuracy (improved from ±0.01%) ensures even more precise signal conditioning.
-
Higher Resolution – 20-bit resolution (increased from 18-bit) for more accurate low-level signal detection.
-
Extended Programmable Gain – Amplifier gain can be programmed from 1 to 20000 (increased from 10000) via software.
-
Wide Input Range – Supports inputs from ±10mV to ±10V or 4-20mA.
-
Integrated I/O – Combines analog inputs, amplifier outputs, and digital I/O on a single board.
-
Ethernet Connectivity – Integrated Ethernet port provides network connectivity for remote monitoring and configuration.
-
Enhanced Diagnostics – The Revision A adds predictive maintenance alerts for proactive signal health management.
-
Extended Temperature Range – Rated for -40°C to +70°C, suitable for extreme environmental conditions.
-
Electrical Isolation – 2500 VAC isolation between field signals and logic ensures operator and processor safety.
-
Robust Environmental Protection – Enhanced conformal coating and 30µin gold-plated edge connectors ensure reliable operation.
-
Plug-and-Play Compatibility – Integrates with DS200CPCAG1A processors and other Mark V boards.
Typical Applications
-
Thermocouple Signal Conditioning – Amplifies and conditions low-level thermocouple signals with higher precision.
-
RTD Signal Conditioning – Amplifies and conditions RTD signals with higher precision.
-
Pressure Transmitter Signals – Amplifies and conditions low range pressure signals.
-
Low-Level Sensor Signals – Amplifies and conditions other low-level sensor signals with higher accuracy.
-
Precision Measurement – Provides high-precision signal conditioning for critical measurements.
-
Extreme Environment Installations – Suitable for outdoor, desert, or Arctic installations.
Comparison: DS200LRPAG1A vs. Base Version
| Feature | DS200LRPAG1A | DS200LRPAG1 (Base) |
|---|---|---|
| Accuracy | ±0.005% | ±0.01% |
| Resolution | 20-bit | 18-bit |
| Programmable Gain Range | 1 to 20000 | 1 to 10000 |
| Predictive Maintenance Alerts | Yes | No |
| Operating Temp | -40°C to +70°C | -30°C to +65°C |
| MTBF | > 120,000 hours | > 100,000 hours |
Selection Guidelines & Precautions
-
Verify signal amplification and precision requirements.
-
Ensure sufficient gain range for your application (1 to 20000).
-
Proper shielding and grounding for low-level signals.
-
Compatible with DS200CPCAG1A.
-
The DS200LRPAG1A is the preferred replacement for the base DS200LRPAG1.
Summary
The DS200LRPAG1A is an enhanced low range/precision amplifier gateway board for GE Mark V systems, providing high-precision amplification (±0.005% accuracy), 20-bit resolution, programmable gain (1-20000), wide input range (±10mV to ±10V), integrated I/O, Ethernet connectivity, predictive maintenance alerts, extended temperature range (-40°C to +70°C), and 2500 VAC isolation. This revision is the recommended replacement for the base DS200LRPAG1. Selection requires evaluation of precision requirements, amplification needs, signal types, and environmental conditions.
NI SCXI-1163
REXROTH VT1516-S-11
PULNIX TM9701
Reviews
There are no reviews yet.