Description
Technical Parameters & Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric (GE) |
| Series | Mark V Speedtronic |
| Full Model | DS200LRPAG1 |
| Board Type | Low Range / Precision Amplifier Gateway Board |
| Analog Inputs | 8 isolated low range analog inputs (±10mV to ±10V or 4-20mA) |
| Amplifier Outputs | 4 precision amplified outputs (0-10V or 4-20mA) |
| Digital Inputs | 8 optically isolated digital inputs (24-250V DC/AC) for status signals |
| Digital Outputs | 8 optically isolated digital outputs (24-250V DC/AC) for control signals |
| Communication Ports | 1 serial port (RS-232/RS-485) for device communication, 1 Ethernet port (10/100) |
| VME Interface | VME backplane (parallel data transfer) |
| Amplifier Gain | Programmable gain (1 to 10000) |
| Accuracy | ±0.01% of reading (high precision) |
| Resolution | 18-bit (analog inputs) |
| Diagnostics | System status, signal integrity, communication health, fault detection |
| Diagnostic LEDs | Board status, fault, signal active, communication active |
| Operating Temp | -30°C to +65°C |
| Protection | Conformal coating + gold-plated edge connectors |
| Physical Dimensions | 6U VME format (233mm × 160mm) |
| MTBF | > 100,000 hours |
Core Advantages & Key Features
-
Low Range Precision Amplification – The DS200LRPAG1 provides high-precision amplification for low range analog signals used in turbine control applications.
-
High Accuracy – ±0.01% accuracy ensures precise signal conditioning for critical measurements.
-
High Resolution – 18-bit resolution for accurate low-level signal detection.
-
Wide Input Range – Supports inputs from ±10mV to ±10V or 4-20mA.
-
Programmable Gain – Amplifier gain can be programmed from 1 to 10000 via software.
-
Integrated I/O – Combines analog inputs, amplifier outputs, and digital I/O on a single board.
-
Ethernet Connectivity – Integrated Ethernet port provides network connectivity for remote monitoring and configuration.
-
Comprehensive Diagnostics – Built-in diagnostics for signal integrity monitoring and fault detection.
-
Electrical Isolation – 2500 VAC isolation between field signals and logic ensures operator and processor safety.
-
Robust Environmental Protection – Conformal coating and gold-plated edge connectors ensure reliable operation.
-
Plug-and-Play Compatibility – Integrates with DS200CPCAG1A processors and other Mark V boards.
Typical Applications
-
Thermocouple Signal Conditioning – Amplifies and conditions low-level thermocouple signals.
-
RTD Signal Conditioning – Amplifies and conditions RTD signals.
-
Pressure Transmitter Signals – Amplifies and conditions low range pressure signals.
-
Low-Level Sensor Signals – Amplifies and conditions other low-level sensor signals.
-
Precision Measurement – Provides high-precision signal conditioning for critical measurements.
Comparison: DS200LRPAG1 vs. Standard Amplifier Boards
| Feature | DS200LRPAG1 | Standard Amplifier Board |
|---|---|---|
| Primary Function | Low range/precision amplifier | General purpose amplifier |
| Input Range | ±10mV to ±10V | 0-10V only |
| Accuracy | ±0.01% | ±0.1% |
| Resolution | 18-bit | 14-16-bit |
| Programmable Gain | Yes (1-10000) | Limited |
| Ethernet Port | Yes | No |
| MTBF | > 100,000 hours | 80,000-90,000 hours |
Selection Guidelines & Precautions
-
Verify signal amplification and precision requirements.
-
Ensure sufficient gain range for your application (1 to 10000).
-
Proper shielding and grounding for low-level signals.
-
Compatible with DS200CPCAG1A.
-
Maintain spares for critical precision measurement applications.
Summary
The DS200LRPAG1 is a low range/precision amplifier gateway board for GE Mark V systems, providing high-precision amplification (±0.01% accuracy), 18-bit resolution, programmable gain (1-10000), wide input range (±10mV to ±10V), integrated I/O, Ethernet connectivity, and comprehensive diagnostics. It enables precise signal conditioning for thermocouple, RTD, pressure transmitter, and other low-level sensor signals. The board integrates with DS200CPCAG1A processors. Selection requires evaluation of precision requirements, amplification needs, and signal types.
ALLIED TELESIS AT-8000S/24POE
NI SCXI-1163
GE IC695CPU310-FT
SIEMENS 7ML5221-1BA17
Reviews
There are no reviews yet.