Description
Technical Parameters
| Parameter | Specification |
|---|---|
| Inputs | 32 digital, optically isolated |
| Input Voltage | 24V DC / 125V DC (selectable) |
| Input Current | 5mA typical per channel |
| Outputs | None (input‑only) |
| Response Time | <2ms |
| Isolation | 1500V RMS (field‑to‑backplane) |
| Diagnostics | Open/short detection, input status monitoring |
| Power | +5V @ 0.9A; +15V @ 0.3A (VME backplane) |
| Firmware | Factory‑programmed (not field‑upgradeable) |
| Conformal Coating | No |
| MTBF | >210,000 hours |
Advantages
-
High Density – 32 inputs in a single slot.
-
Dual Voltage Support – 24V or 125V DC field power.
-
Optical Isolation – 1500V isolation for noise immunity.
-
Fast Response – <2ms input scan time.
-
Hot‑Swap Capable – IEEE 1101.11 compliant.
-
Diagnostics – Open/short detection and input status monitoring.
-
Lower Power – Consumes less power than I/O combination modules.
Applications
| Industry | Use |
|---|---|
| Gas Turbines | Start/stop status, valve position feedback, flame detection |
| Steam Turbines | Emergency trip signal monitoring, contact status |
| Combined Cycle | HRSG damper status, pump run/stop monitoring |
| Oil & Gas | Compressor anti‑surge status, shutdown logic monitoring |
Comparison
| Feature | DS3800HPRA1G1D | DS3800HPRA | DS3800HPCA | DS3800HMPK |
|---|---|---|---|---|
| Inputs | 32 digital | 32 digital | 32 digital | 8 analog |
| Outputs | None | None | None | None |
| Voltage | 24/125V selectable | 24/125V selectable | 24/125V selectable | N/A |
| Type | Digital input | Digital input | Digital input | Analog input |
| Best For | High‑density monitoring | High‑density monitoring | High‑density monitoring | Temperature |
Note: The DS3800HPRA1G1D is functionally identical to the base DS3800HPRA in all key specifications. The suffix indicates a minor calibration or firmware variation.
Selection
| Scenario | Choice |
|---|---|
| High‑density input monitoring only | DS3800HPRA1G1D – 32 inputs, no outputs. |
| Inputs + outputs required | Use DS3800HPBC (16 in / 8 out) or DS3800HPBD (32 in / 16 out). |
| Digital control (24V only) | Use DS3800HP1B. |
| Temperature monitoring | Use DS3800HMPK series. |
| TMR | Three identical 1G1D modules. Do not mix revisions. |
| Non‑GE | Do not use – VME only. |
Critical Precautions
-
Authenticate – Check GE hologram, serial number.
-
ESD – Wear grounded wrist strap.
-
Backplane – Verify +5V, +15V, -15V before insertion.
-
Voltage Selection – Verify field voltage (24V or 125V) matches module configuration.
-
Wiring – Use shielded cable; maintain separation from AC power.
-
Torque – 0.5‑0.6 Nm.
-
Temp – Keep rack <70°C.
-
Firmware – Factory‑programmed; cannot be field‑updated.
-
Sourcing – Obsolete; source refurbished from certified GE repair centers.
Final Summary
The General Electric DS3800HPRA1G1D is a high‑density digital input module for GE Speedtronic systems, offering 32 optically isolated inputs with selectable 24V or 125V DC field power. It is ideal for large‑scale monitoring of limit switches, pushbuttons, and alarm contacts where outputs are not required. It is functionally identical to the DS3800HPRA. For applications requiring both inputs and outputs, use DS3800HPBC or DS3800HPBD. For temperature monitoring, choose DS3800HMPK. Source from certified repair centers.
п XP233
A-B 1756-IB16
A-B 1783-US8T
Reviews
There are no reviews yet.