Description
Technical Parameters
| Parameter | Specification |
|---|---|
| Inputs | 16 digital, optically isolated |
| Input Voltage | 24V DC (nominal), 18-30V DC range |
| Input Current | 5mA typical per channel |
| Outputs | 8 digital, solid-state (MOSFET) |
| Output Voltage | 24V DC (nominal), up to 60V DC |
| Output Current | 0.5A per channel (continuous), 1.0A peak |
| Response Time | <2ms (inputs), <5ms (outputs) |
| Isolation | 1500V RMS (field-to-backplane) |
| Diagnostics | Open/short detection, overcurrent protection, watchdog |
| Power | +5V @ 0.8A; +15V @ 0.3A (VME backplane) |
| Firmware | Factory-programmed (not field-upgradeable) |
| Conformal Coating | No |
| MTBF | >200,000 hours |
Advantages
-
High Density – 16 inputs + 8 outputs in a single VME slot.
-
Optical Isolation – 1500V isolation for noise immunity.
-
Fast Response – <2ms input scan time.
-
Diagnostics – Open/short detection, overcurrent protection.
-
Hot-Swap Capable – IEEE 1101.11 compliant.
-
Versatile Power – 24V DC field power with wide tolerance (18-30V).
Applications
| Industry | Use |
|---|---|
| Gas Turbines | Start/stop sequencing, valve position status, flame detection |
| Steam Turbines | Emergency trip signals, solenoid control, status monitoring |
| Combined Cycle | HRSG damper control, pump run/stop status |
| Oil & Gas | Compressor anti-surge status, shutdown logic |
Comparison
| Feature | DS3800HP1B | DS3800HMAC1H1F (Universal) | DS3800HMPK (TC-only) |
|---|---|---|---|
| Type | Digital I/O | Analog I/O | Analog input (TC) |
| Inputs | 16 digital | 8 analog | 8 analog |
| Outputs | 8 digital | 4 analog | None |
| Isolation | 1500V | 2500V | 2500V |
| Best For | On/off control | General-purpose analog | Temperature monitoring |
Selection
| Scenario | Choice |
|---|---|
| Digital control (start/stop, alarms) | DS3800HP1B – discrete I/O. |
| Temperature monitoring (EGT) | Use DS3800HMPK series. |
| General-purpose analog with outputs | Use DS3800HMAC1H1F. |
| TMR | Three identical HP1B modules. |
| Non-GE | Do not use – VME only. |
Critical Precautions
-
Authenticate – Check GE hologram, serial number.
-
ESD – Wear grounded wrist strap.
-
Backplane – Verify +5V, +15V, -15V before insertion.
-
Wiring – Use 18-22 AWG shielded cable; maintain separation from AC power.
-
Load Check – Outputs are rated 0.5A continuous; do not exceed.
-
Field Power – 24V DC field power required for outputs; verify polarity.
-
Torque – 0.5-0.6 Nm.
-
Temp – Keep rack <70°C.
-
Firmware – Factory-programmed; cannot be field-updated.
-
Sourcing – Obsolete; source refurbished from certified GE repair centers.
Final Summary
The General Electric DS3800HP1B is a high-density digital I/O module for GE Speedtronic systems, offering 16 inputs and 8 outputs in a single VME slot. It is ideal for start/stop sequencing, valve control, and alarm monitoring with fast response (<2ms) and optical isolation (1500V). For analog temperature monitoring, choose DS3800HMPK. For general-purpose analog with outputs, choose DS3800HMAC1H1F. Source from certified repair centers.
YASKAWA SGMPH-08AAA41
A-B 1761-NET-AIC
A-B 1756-IB32
Reviews
There are no reviews yet.