ABB PFEA111-20 3BSE050090R20

¥9,999.00

PFEA111-20 is an ABB compact DIN-rail tension amplifier for web tension systems. It receives signals from two PFTL series pressductor load cells, calculates total tension (A+B), differential value (A-B), and provides analog output for closed-loop tension control of drives or PLCs. This part number 3BSE050090R20 is the updated version, different from the older 3BSE028140R0020. It is analog-only version without fieldbus communication. Maintenance engineers replace this unit to restore tension feedback loops.

Category:

Description

Product Parameters

  • Brand: ABB
  • Model: PFEA111-20, PN: 3BSE050090R20
  • Load cell inputs: 2 channels (A, B)
  • Analog output: 4-20mA / 0-10V selectable SUM tension signal
  • Power supply: 24VDC (18~36VDC), power consumption approx 8W
  • Mounting: DIN rail, IP20 cabinet installation
  • Display: 2×16 LCD screen, show A, B, SUM, difference
  • Functions: Load cell excitation, zero & span calibration, sensor break detection, digital filtering
  • Operating temperature: -40℃ ~ +70℃
  • Status: Standard tension spare, new and refurbished available

Advantages and Features

Compact cabinet installation, easy calibration on front panel. Supports load cable resistance compensation. Built-in sensor fault alarm for load cell open/short circuit. Fast response analog output, suitable for high-speed unwinding/winding closed-loop control. Good anti-interference for paper, film, foil and textile lines.

Application Cases and Application Fields

Paper machines, film coating, printing, slitting, textile, metal foil, lithium battery coating lines. It is used for unwinder and winder tension control. When the amplifier fails, tension feedback is lost, which may cause web breakage, wrinkling and uneven winding. Replacement recovers tension measurement.

Comparisons with Competing Products

  • PFEA111: Analog only (this model)
  • PFEA112: Same hardware with PROFIBUS-DP
  • PFEA113: 4 load cell inputs
  • Distinguish PN: 3BSE050090R20 (newer) vs 3BSE028140R0020 (old revision), not fully interchangeable It is only a signal amplifier, not a tension controller; it needs to work together with load cells and drive/PLC.

Selection Suggestions and Precautions

Confirm full part number 3BSE050090R20. For refurbished units, test load cell excitation and analog output before installation. Lock the tension loop and stop the related section before replacement. After installation, perform zero and span calibration, verify tension reading and analog output, confirm that the ABB PFEA111-20 works reliably.

YOKOGAWA CP451-10
YOKOGAWA CP451-10 S2
YOKOGAWA CP451-10维修费
YOKOGAWA CP451-50
YOKOGAWA CP461-50

Reviews

There are no reviews yet.

Be the first to review “ABB PFEA111-20 3BSE050090R20”

Your email address will not be published. Required fields are marked *

Post comment