ABB NAMU-01C 64702475D

¥9,999.00

NAMU-01C is the auxiliary measurement unit for ABB ACS800 multi-drive system, working with RDCU control board via DDCS optical fiber. It is used for high-precision collection of drive-side voltage, current and additional sensor signals, supplements the measurement capacity of the main control unit, provides data for drive protection, monitoring and calculation. Drive maintenance engineers replace this module to restore auxiliary measurement and DDCS fiber communication of the multi-drive group

Category:

Description

Product Parameters

  • Brand: ABB
  • Model: NAMU-01C, Part No. 64702475D
  • Type: Auxiliary Measuring Unit
  • Compatible system: ACS800 multi-drive
  • Communication: DDCS fiber (two optical channels, 10MBd / 5MBd)
  • Power supply: 24 VDC
  • Installation: DIN rail
  • Measurement: AC voltage, AC current, external sensor signals
  • Configuration: DIP switch for voltage range (207V / 500V / 690V) and measurement mode
  • Operating temperature: 0 ~ 60°C
  • Status: Legacy ACS800 spare, discontinued, mainly refurbished/surplus stock

Advantages and Features

Fiber DDCS transmission, excellent isolation and anti-interference for high-power drive cabinets. It expands extra electrical quantity measurement points beyond the main control board. It supports multiple voltage grade settings to match different drive units. Built-in fault diagnosis, fiber link status and measurement error can be viewed on the RDCU panel. It is matched with APBU-44C optical branching unit in the PPCS/DDCS network.

Application Cases and Application Fields

Used in ABB ACS800 multi-drive high-power transmission: metallurgical main drives, paper machine drives, port hoists, large test benches. When the auxiliary measurement is lost or DDCS fiber communication fails, replacing NAMU-01C restores electrical quantity monitoring and related protection functions.

Comparisons with Competing Products

NAMU-01C is only for ACS800 multi-drive DDCS measurement; it is not a control board (different from RMIO-01C, SMIO-01C). It cannot be used on ACS880 single drives. It works together with RDCU and APBU-44C, not interchangeable with APBU series optical branching modules.

Selection Suggestions and Precautions

Confirm full part number 64702475D. For refurbished units, test two DDCS fiber ports and each measurement channel before installation. Cut off the drive power before replacement, pay attention to the fiber bending radius. After installation, check DDCS link status and measured values on RDCU, verify drive protection functions, confirm that the ABB NAMU-01C works reliably.

Reviews

There are no reviews yet.

Be the first to review “ABB NAMU-01C 64702475D”

Your email address will not be published. Required fields are marked *

Post comment