Grid view List view

Showing 289–300 of 419 results

MVME162-213

¥6,419.00
argument
Processor:
Equipped with the MC68040 or MC68LC040 microprocessor, with a choice of 25 MHz or 32 MHz (33 MHz is also mentioned).
It has 8KB cache and MMU (memory management unit) and FPU (floating point arithmetic unit).
Memory:
Shared DRAM: 4MB, 8MB, 16MB or 32MB with optional parity or ECC (error checking and correction), up to 64MB with an extended sandwich.
SRAM: 128KB with spare battery.
Flash: Onboard monitor/debugger, user specified requirements (1MB-2xx/3xx models on MVME162, 2MB on 7xx/8xx models).
NVRAM: 8K x 8, with clock backup battery.
specification
I/O interface:
Four serial communication ports, configured as EIA-232 2D DTE.
Two industrial packaging ports.
Optional SCSI Bus interface (DMA).
Optional 32-bit Ethernet transceiver interface (local bus DMA).
Four 32-pin JEDEC sockets for EPROM and Flash (four for models MVME162-2xx/3xx and only two for 7xx/8xx).
Timers: Six 32-bit timers (four without VMEbus) and watchdog timers.
Power supply: 5V DC.
Power consumption: 10W.

MVME162-213

¥4,158.00
argument
Processor: MC68040, optional frequency 25 MHz or 32 MHz, enhanced 32-bit, microprocessor and FPU with 8KB cache and MMU.
Memory: 2 MB to 32 MB expandable RAM, expandable up to 64MB via expansion sandwich.
Memory: IDE hard disk or flash memory, random access memory (RAM) for user programs.
specification
I/O ports: Two RS-232 serial ports, one SCSI port, one parallel port, and one Ethernet port (optional).
Power supply: Power supply voltage 5V DC, power consumption 10W.
Operating temperature range: -40°C to +85°C.
Size and weight
Size: 146 mm x 100 mm x 30 mm.
Weight: 500 g.

MVME2305-900

¥5,248.00
argument
Power range: Its supporting servo drivers (such as MVME2305-900 series pulse type servo drivers) power range covers 50W ~ 2.5KW.
Control mode: Support dual pulse (CW/CCW) mode and pulse direction (P/D) mode control.
specification
Specifications: MVME2305-900 series may have a variety of specifications, such as CD120, CD412, CD422, CD432, CD622, CD420, 430, 620, etc.
Usage: Usually used in embedded computing or control systems, such as industrial automation, data processing, etc.
Size and weight
Weight: About 3kg

VME162PA-344SE-2G

¥6,350.00
argument
Driving voltage: AC 110V-220V
Adaptive current: below 7.0A
Outer diameter: Suitable for various types of three-phase hybrid stepper motors with outer diameter of 86-130mm
specification
Internal circuit: The circuit similar to the servo control principle makes the motor run smoothly at low speed, almost no vibration and noise, and the torque of the motor is much higher than that of the two-phase and five-phase hybrid stepper motor at high speed
Volume: 200x156x90(mm³)
Net weight: 1.6kg
Phase memory function: The driver automatically remembers after the input pulse stops for more than 5 seconds
Size and weight
Size: 200x156x90(mm³)
Weight: 1.6kg

MVME162-213

¥6,235.00
Parameters and specifications
Processor: MC68040, 33 MHz (there are also references to 25 MHz or 32 MHz MC68040 and MC68LC040 microprocessors).
Memory: RAM is scalable, from 2 MB to 32 MB (shared DRAM, with parity or ECC).
Memory: IDE hard disk or flash memory.
I/O interface:
Serial communication ports: four, configured as EIA-232 2D DTE; There is also information mentioning 2 RS-232 serial ports.
SCSI interface: Optional and supports DMA.
Parallel port: at least one port.
Ethernet interface: Optional and supports DMA.
Industrial packaging ports: two.
NVRAM and Clock Backup battery: 8K x 8 NVRAM.

MVME2100

¥6,235.00
Communication interface:
Including VMEbus, RS-232, RS-485, Ethernet and so on.
Extension interface:
Supports expansion interfaces such as PCI and PCI-X.
specification
The MVME2100 is a highly modular VME application single board computer with powerful computing power and rich I/O interfaces.
Suitable for industrial automation, communications, military and aerospace applications.
dimension
The dimensions are 233mm x 167mm x 30mm.
weight
The weight is approximately 500 grams, but the exact weight may vary depending on the configuration or manufacturer.
series
The MVME2100 belongs to MOTOROLA’s MVME family of VMEbus industrial computer modules.

MVME162PA-344SE

¥6,238.00
argument
Power supply: Dual power supply redundant input, DC(9-36)V, typical DC24V, power consumption less than 4W, with DC1500V voltage isolation and reverse protection function.
Power fault alarm output: Fiber link fault and power fault alarm output, contact capacity: DC48V/1A.
Operating temperature: -10-70 °C (otherwise known as -10 ~ 60 °C), storage temperature range of -40 ~ 85 °C.
Relative humidity: ≤90% (no condensation).
Output current: Digital output and alarm output current up to 200 mA/ channel.
specification
Communication interfaces and protocols: Support a variety of communication interfaces and protocols for data exchange and communication with other devices or control systems.
Programmability: Some modules may be programmable, allowing users to customize the logic and functionality of the input and output as needed.

MVME2400-0351-MPC750

¥6,235.00
argument
Processor: MPC750 (also known as PowerPC 750), the main frequency may reach 500 MHz.
Memory: Supports up to 256MB or 512MB SDRAM, expandable up to 2GB.
Storage: 4MB flash and 512KB SRAM, support IDE hard drive, CF card, etc.
Interface: Ethernet, serial port, parallel port and other interfaces, as well as VMEbus, PCI, RS-232, RS-485 and so on.
Operating system: Supports VxWorks, Linux, etc.
specification
Size: 6U VME board.
Operating temperature: -40℃ ~ 85℃.

MVME162-213

¥4,106.00
argument
Processor:
MOTOROLA’s 680×0 series processors, such as the MC68040, are available in 33 MHz or optional 25 MHz, 32 MHz and other versions.
It is equipped with FPU (floating point processor) and MMU (memory management unit).
Memory:
ECC (Error Checking and Correction) SDRAM is supported, and the capacity is scalable from 2 MB to 32 MB, up to 64MB through the expansion sandwich.
128KB SRAM with spare battery.
User specified flash requirements, such as 1MB-2xx/3xx models on MVME162 and 2MB on 7xx/8xx models.
I/O interface:
Four serial communication ports, configured as EIA-232 2D DTE.
Two industrial packaging ports.
Optional SCSI Bus interface (DMA).
Optional 32-bit Ethernet transceiver interface (local bus DMA).
Other possible interfaces include parallel ports, USB, etc., but it depends on the model and configuration.
specification
Size: 146 mm x 100 mm x 30 mm.

MVME-147A

¥5,069.00

argument
Processor: Equipped with the MC68030 enhanced 32-bit microprocessor, which may be 16, 25, or 33.33 MHz variants.
Floating-point coprocessor: 16, 25, or 33.33 MHz MC68882 floating-point coprocessor.
Memory: 4, 8, 16 or 32MB shared DRAM, programmable peer.
Storage: 4K x 8 SRAM and clock with battery; Four 28/32-pin ROM/PROM/EPROM/EEPROM 16-bit wide sockets.
System interface: A32/D32 VMEbus master/slave system interface Controller function.
specification
Size: 6U x 160mm x 233mm.
Weight: 1.36kg.
Operating temperature: 0°C ~ 60°C.

MVME162-212

¥6,520.00
Parameters and specifications
Processor:
Some configurations may feature an Intel Pentium M low power processor.
Other configurations may come with a 25 MHz XC68040 microprocessor.
Memory:
Supports a maximum of 1 GB DDR memory.
Some configurations provide specific memory sizes, such as 256 MB or 512 MB.
Storage:
Supports storage devices such as Type II CF card, DOM, and 2.5″ notebook hard disk.
Display:
It is equipped with a 17″ SXGA TFT LCD display with a resolution of 1280×1024 and a brightness of 300cd/m2.
Interface:
Provides six USB2.0 ports, four serial ports, one parallel port, and optional dual network ports.
Supports one PCI expansion slot.

MVME133SA

¥5,628.00

argument
Clock speed: 16 MHz.
RAM: 4 MB.
Digital output module: 24 V DC current with 16 channels.
Power supply: Voltage 24V, current 100-400A.
specification
Series: MVME series.
Type: Intelligent board processor module.
Size and weight
Size: The specification size is 302022
Weight: about 2KG.