Processor: The 1.8GHz Pentium M processor provides powerful computing power.
Memory: Up to 64 MB of user memory and 64 MB of user flash memory are supported for fast data transfer and storage.
Communication interface: Provides three serial ports to connect to various external devices, and may support other communication methods such as Ethernet.
Power supply: 24 VDC12, there are also references to 12 VDC (maximum power consumption does not exceed 5W), the specific may vary by application.
Operating temperature: Depending on the data, the temperature range may vary, such as -40°C to +70°C5, or -40°C to +85°C.
Size: 8.38 inches x 6.69 inches x 2.17 inches (or 212.8 mm x 170 mm x 55 mm).
Weight: 2.0 LBS (or 0.91 kg)
Processor: Based on the PowerPC architecture, there are claims that the MPC7477 PowerPC processor with Freescale is used, and there are also claims that the PowerPC 750 processor runs at 1 GHz.
Memory: Up to 2 GB of DDR2 memory, also known as 1 GB DDR2 SDRAM.
Storage space: Contains 256 MB Flash and 16 GB SATA hard disk.
specification
I/O ports: 4 Gigabit Ethernet ports, 2 RS-232 ports, 1 USB 2.0 port, 1 PCI-X slot.
Input voltage range: 12-48VDC (for EMERSON brand products).
Output voltage range: 5VDC (for EMERSON brand products).
Output current: up to 10A (for EMERSON brand products).
Architecture: Based on the PowerPC750 architecture, this is a 32-bit RISC processor
Processing power: The MCP750 has a high-performance processor that is suitable for handling complex control algorithms and data processing tasks
Operating system support: Support a variety of embedded operating systems, such as VxWorks, Linux, etc
Communication interface: including Ethernet, serial port, CAN bus, etc., easy to communicate and integrate with other control systems, PLC, HMI and sensors and other devices
Processor: Uses MOTOROLA’s low-power, high-performance PowerPC 750 microprocessor
Cache: Has 32KB/32KB level 1 cache and 1MB back level 2 cache
Memory: Onboard ECC SDRAM ranges from 32MB to 512MB, while onboard firmware capacity up to 1MB or can be specified by the user
Interface: Dual PMC ports, support for front panel and P2 input/output (I/O), provide more connectivity and expansion options
Network communication: 10/100Mb/s Ethernet interface
Processor: Up to 1.3GHz system-on-chip Freescale MPC864xD with dual PowerPC e600 processor cores.
Memory: Up to 2GB DDR2 ECC memory, as well as 128MB NOR flash and 2GB NAND flash.
Network interface: Four Gigabit Ethernet ports.
Series:
MOTOROLA MVME7100-0171-2GF belongs to the MVME7100 series, which is a model of VMEbus single-board computer.
Processor: Typically based on the MPC7455 1GHz CPU or Freescale MPC8540 PowerQUICC III processor, providing the device with powerful computing power and processing speed.
Memory: Equipped with 512MB ECC SDRAM or up to 2GB DDR2 memory, ensuring high-speed data transmission and stability.
Ports: Provides Gigabit E-NET (ENET) connections, supports dual PCI and Peripheral Component Interconnect (PMC) interfaces, and other I/O interfaces, such as serial ports, USB 2.0 ports, and CAN ports.
specifications : MOTOROLA MVME162PA is a servo control system module, belongs to embedded VME controller
dimension : The specific dimension is 263337 (unit may be mm or determined according to the actual situation), the net depth/length of the product is 135mm
weight
Net weight : 2.3kg.
function
Core functions : As a servo control system module, MVME162PA plays a key role in the automatic control system, responsible for power control and other core tasks .
Application fields : widely used in PLC/DCS system and other industrial automation field, to provide strong support for the stable operation and efficient control of the system .
Processor: This model may be equipped with the MC68030 Enhanced 32-bit microprocessor or a similar microprocessor, which has an on-chip cache for instructions and data, increasing the efficiency of the processor.
Memory: The specific memory configuration may vary depending on the product version or configuration.
Bus: As a VMEbus single-board computer, it may support the VMEbus communication protocol.
Features:
High performance: With an efficient processor and memory configuration, the single-board computer is able to handle complex computation and control tasks.
Processor: The high-performance MPC7457 PowerPC® processor supports speeds up to 1.267GHz.
Memory: Up to 2GB of on-board DDR ECC memory and 128MB flash memory for demanding applications.
Interface: It has two 33/66/100 MHz PMC-X interfaces, as well as dual Gigabit Ethernet interfaces, which can connect various sensors, actuators and communication devices.
Communication interface: includes 2 RS-232 interfaces, 1 RS-485 interface and 1 Ethernet interface, as well as 32 digital input/output, 16 analog input and 8 analog output.
Processor: Uses MOTOROLA’s low-power, high-performance PowerPC 750 microprocessor.
Cache: Has 32KB/32KB level 1 cache and 1MB back level 2 cache.
Memory: Onboard ECC SDRAM ranges from 32MB to 512MB, while onboard firmware capacity up to 1MB or can be specified by the user.
Interface: Dual PMC ports, support for front panel and P2 input/output (I/O), provide more connectivity and expansion options.
Extensibility: On-board debug monitor diagnostics with self-test, two 32/64-bit PMC expansion slots with front panel and P2 I/O, and 64-bit PCI expansion sandwich connectors.
Network communication: 10/100Mb/s Ethernet interface.
CPU model: MOTOROLA CPU3680
Supported communication protocol: HDLC
Supported fieldbuses: FBI100 to 100 series FBM
Patented fault-tolerant operation provided: The use of two control modules greatly improves reliability compared to other process controllers
Control algorithm: Support general control algorithm and various FBM
External time synchronization: Support for using optional time synchronization from GPS satellites
Online image update: provides fault-tolerant FCP270 without shutting down the process
Configuration: It can be run on A handheld computer through the I/A Series® system Letterbug configuration program
Supported software versions: I/A series of self-hosted mode software versions 8.4-v8.8 or Foxboro Evo™ Control Core Services v9.0 or higher
