Description
Key Specifications
| Parameter | Specification |
|---|---|
| Serial Ports | 4 configurable serial ports (RS-232, RS-422, RS-485) |
| Serial Data Rate | Up to 115.2 kbps (standard), 1 Mbps (high-speed mode) |
| Serial Protocols | Modbus RTU, DNP3, ASCII, GE Serial, Profibus DP (optional) |
| Ethernet Bridge | 2 Ethernet ports (10/100/1000Base-T) for I/O Net and plant network bridging |
| Protocol Conversion | Serial-to-Ethernet, Ethernet-to-Serial, Multi-protocol gateway |
| Data Buffering | 1 MB buffer for serial data queuing |
| Diagnostics | 500-event fault log with timestamps and communication statistics |
| Isolation | 1500 VDC (serial-to-backplane) |
| Communication | I/O Net (dual Ethernet ports for redundancy) |
| Form Factor | 6U VME64x (160 × 233 mm), single-slot width |
| Indicators | Per-port status, module health, communication status |
| Operating Temp | 0 °C to +60 °C |
| Power Draw | 10 W (+5 V / +3.3 VDC) |
| Connectors | Front-panel DB9 serial ports + RJ45 Ethernet ports |
Advantages & Distinctive Features
-
4 Serial Ports: Supports up to 4 legacy serial devices per module.
-
Flexible Serial Configuration: RS-232, RS-422, or RS-485 per port.
-
Multi-Protocol Support: Modbus RTU, DNP3, ASCII, GE Serial, Profibus DP.
-
Protocol Conversion: Converts between serial and Ethernet protocols.
-
High-Speed Mode: 1 Mbps for high-speed serial devices.
-
Redundant Ethernet Ports: Two ports for network redundancy.
-
Hot-Swappable: No rack power-down for replacement.
-
Direct Retrofit: Replaces older ISBB series boards.
Application Fields
-
Legacy Device Integration: Connecting serial devices to Mark VIe
-
Modbus RTU Networks: SCADA and DCS integration
-
DNP3 Networks: Utility substation communication
-
Profibus DP: Third-party device integration
-
Plant Communication: Serial-to-Ethernet bridging
Comparison with IGDHG1A and Competitors
| Feature | GE IS215ISBBH1A | GE IS205IGDHG1A | Competitor A | Competitor B |
|---|---|---|---|---|
| Serial Ports | 4 | 2 | 2 | 4 |
| Data Rate | 115.2 kbps (1 Mbps high-speed) | 115.2 kbps | 115.2 kbps | 115.2 kbps |
| Protocol Support | Modbus RTU, DNP3, ASCII, Profibus DP | Modbus RTU, DNP3 | Modbus RTU | Modbus RTU, DNP3 |
| Protocol Conversion | Yes | Yes | Yes | Yes |
| Ethernet Ports | 2 | 2 | 1 | 2 |
| Hot-Swappable | Yes | Yes | No | Yes |
Selection Guidelines
-
When to choose: Applications requiring integration of legacy serial devices into the Mark VIe system.
-
Serial Configuration: Configure port type, baud rate, parity, and protocol per port.
-
Protocol Conversion: Configure serial-to-Ethernet mapping in Toolbox ST.
-
High-Speed Mode: Enable for devices requiring >115.2 kbps.
-
Compatibility: Fits all Mark VIe VME64x racks. Requires ControlST v6.0 or higher.
Operational Precautions
-
Wiring: Follow GE wiring diagrams—correct polarity for RS-232/422/485.
-
Serial Configuration: Verify baud rate, parity, and stop bits match connected devices.
-
Protocol Testing: Test each serial port during commissioning.
-
Ethernet Configuration: Configure IP addresses before plant network connection.
-
LED Diagnostics: Green = normal; Amber = communication active; Red = fault.
-
Fault Log: Access 500-event log via Toolbox ST.
-
Hot-Swap: Remove/insert slowly under power.
-
Spare Stock: Maintain 1 spare per 3–4 racks.
-
Firmware Updates: Ensure the GE IS215ISBBH1A is in “standby” mode.
-
ESD: Handle by edges with grounded wrist strap.
A-B 1756-ENBT
˹ 1900071292
SCHNEIDER 140ARI03010
GE IC697MDL940F
Reviews
There are no reviews yet.