IS210HSLAH1A GE

¥999.00

The GE IS210HSLAH1A is a VMEbus terminal board manufactured by General Electric for the Mark VIe distributed control system (DCS). This board is a dedicated High-Speed Logic and Actuator Control module, designed to provide high-speed digital logic processing and actuator control for turbine and industrial control applications. The GE IS210HSLAH1A enables fast, deterministic control of actuators, solenoids, and high-speed digital devices with microsecond-level response times. The “H1A” designation indicates a first-generation high-speed logic and actuator control module with robust performance and diagnostic features.

Category:

Description

Key Specifications

Parameter Specification
Digital Inputs 16 high-speed digital inputs (optically isolated)
Input Response Time <5 µs
Digital Outputs 16 high-speed digital outputs (optically isolated)
Output Response Time <10 µs
Output Current 0.5 A per channel (continuous), 2 A inrush (100 ms)
Actuator Control Outputs 4 analog output channels (4–20 mA, 0–10 V, ±10 V)
Output Resolution 16-bit DAC
Output Accuracy ±0.05% of full scale
Output Response Time <1 ms
Logic Processing Programmable logic gates, timers, counters, sequence logic
High-Speed Counter 4 high-speed counters (up to 100 kHz)
Pulse Generation 4 pulse outputs (PWM, frequency, pulse train)
Isolation 1500 VDC (I/O-to-backplane)
Diagnostics 500-event fault log with timestamps
Communication I/O Net (dual Ethernet ports for redundancy)
Form Factor 6U VME64x (160 × 233 mm), single-slot width
Indicators Per-channel LED, module health, communication status
Operating Temp 0 °C to +60 °C
Power Draw 12 W (+5 V / +3.3 VDC) + external 24 VDC field power
Connectors Front-panel 48-pin terminal block with gold-plated contacts and captive washer screws

Advantages & Distinctive Features

  • High-Speed Digital I/O: 16 inputs (<5 µs) and 16 outputs (<10 µs) for fast deterministic control.

  • Integrated Actuator Control: 4 analog outputs for precise actuator and valve positioning.

  • On-Board Logic Processing: Programmable gates, timers, counters—reduces processor load.

  • High-Speed Counters: 4 counters up to 100 kHz for flowmeter and encoder inputs.

  • Pulse Generation: PWM, frequency, and pulse train outputs for stepper and servo control.

  • Fast Response: <5 µs input and <10 µs output response for critical control loops.

  • Hot-Swappable: No rack power-down for replacement.

  • Direct Retrofit: Replaces older HSLA series boards.

Application Fields

  • Gas Turbines: High-speed valve control, fuel metering, fast actuator positioning

  • Steam Turbines: Fast-acting valve control, emergency actuator positioning

  • Compressors: Surge control, fast-acting blow-off valves

  • Generators: Excitation control, fast synchronizing

  • Test Cells: High-speed data acquisition and actuator control

  • Pulse Measurement: Flowmeters, encoders, high-speed counters

Comparison with DSRGG1A and Competitors

Feature GE IS210HSLAH1A GE IS205DSRGG1A Competitor A Competitor B
Digital Inputs 16 (<5 µs) 16 (standard) 16 16
Digital Outputs 16 (<10 µs) 16 (standard) 16 16
Analog Outputs 4 None None None
Actuator Control Yes No No No
High-Speed Counters 4 (100 kHz) 4 (50 kHz) 2 4
Pulse Generation PWM/Frequency/Pulse PWM only No PWM
On-Board Logic Programmable gates/timers No No No
Hot-Swappable Yes Yes No Yes

Selection Guidelines

  • When to choose: Applications requiring high-speed digital I/O, actuator control, and on-board logic processing.

  • Input Configuration: Configure input response time and filtering per channel.

  • Output Configuration: Configure output type (digital or analog) per channel.

  • Counter Configuration: Set scaling and counting modes for flowmeters or encoders.

  • Pulse Generation: Configure PWM, frequency, or pulse train outputs for actuators.

  • Compatibility: Fits all Mark VIe VME64x racks. Requires ControlST v6.0 or higher.

Operational Precautions

  1. Wiring: Follow GE wiring diagrams—correct polarity and shield grounding essential.

  2. Field Power: Properly size external 24 VDC supply for output loads.

  3. Logic Configuration: Verify programmable logic during commissioning.

  4. Counter Testing: Verify counter accuracy with known pulse sources.

  5. Pulse Generation Testing: Verify PWM/frequency outputs with oscilloscope.

  6. LED Diagnostics: Green = normal; Amber = fault; Red = module fault.

  7. Fault Log: Access 500-event log via Toolbox ST.

  8. Hot-Swap: Remove/insert slowly under power.

  9. Spare Stock: Maintain 1 spare per 3–4 racks.

  10. Firmware Updates: Ensure the GE IS210HSLAH1A is in “standby” mode during updates.

  11. ESD: Handle by edges with grounded wrist strap.

SCHNEIDER TSX3722101
A-B 1746-NT4
A-B 1756-PA75
A-B 1761-L32BWA

Reviews

There are no reviews yet.

Be the first to review “IS210HSLAH1A GE”

Your email address will not be published. Required fields are marked *

Post comment

Related products