Description
Key Specifications
| Parameter | Specification |
|---|---|
| Input Channels | 8 dual-sensor channels (16 total inputs) — each configurable as TC or RTD |
| Thermocouple Types Supported | J, K, T, E, N, R, S, B — software-selectable |
| Thermocouple Accuracy | ±0.08% of reading + ±0.4 °C |
| RTD Types Supported | Pt100 (α = 0.00385), Pt500, Pt1000, Ni120 |
| RTD Connection | 3-wire or 4-wire (software-selectable) |
| RTD Accuracy | ±0.08% of reading + ±0.3 °C |
| Cold Junction Compensation | Integrated CJC sensors (±0.2 °C accuracy) |
| Dual-Sensor Redundancy | Each channel supports two independent sensors (TC or RTD) |
| Redundancy Logic | On-board average, difference, maximum, and minimum calculation |
| Resolution | 0.05 °C |
| Sample Rate | 10 Hz (sequential scanning) |
| Burnout Detection | Open-circuit detection for TC and RTD faults |
| Lead-Wire Compensation | Automatic compensation for 3-wire and 4-wire RTDs |
| Excitation Current | Programmable (0.5 mA, 1 mA, 2 mA) for RTDs |
| Isolation | 1500 VDC (I/O-to-backplane) |
| Diagnostics | 750-event fault log with timestamps (expanded) |
| Operating Temp | –25 °C to +70 °C (extended range) |
| Humidity | 5–95% non-condensing (with conformal coating) |
| Coating | Conformal coating (standard) — UV-traceable |
| Manufacturing | 120-hour burn-in, 100% X-Ray/AOI, military-grade components |
| Form Factor | 6U VME64x (160 × 233 mm), single-slot width |
| Power | 12 W (+5 V / +3.3 VDC) |
| Connectors | 48-pin terminal block with gold-plated contacts and captive washer screws |
Advantages & Distinctive Features
-
Dual-Sensor Redundancy: Each channel supports two independent sensors (TC or RTD).
-
Versatile Input Support: Each channel configurable as TC or RTD—flexibility for mixed sensor types.
-
On-Board Redundancy Logic: Average, difference, maximum, and minimum calculations.
-
Integrated CJC: ±0.2 °C accuracy for TC measurements.
-
RTD Lead-Wire Compensation: Automatic for 3-wire and 4-wire RTDs.
-
Burnout Detection: Open-circuit detection for both TC and RTD faults.
-
Programmable RTD Excitation: 0.5 mA, 1 mA, 2 mA for optimal performance.
-
High Accuracy: ±0.08% TC + ±0.4 °C; ±0.08% RTD + ±0.3 °C.
-
Conformal Coating Standard: Protects against humidity, salt spray, and chemicals.
-
Extended Temperature Range: –25 °C to +70 °C.
-
Expanded Diagnostic Log: 750-event fault log.
-
Military-Grade Manufacturing: 120-hour burn-in, military-grade components.
-
Gold-Plated Captive Washer Terminals: Corrosion-resistant and vibration-proof.
-
Hot-Swappable: No rack power-down for replacement.
-
Direct Retrofit: Replaces older DTRT series boards.
Application Fields
-
Gas Turbines: Exhaust temperature (TC), bearing temperature (RTD), dual redundancy
-
Steam Turbines: Casing temperature (TC), bearing temperature (RTD)
-
Compressors: Inlet/discharge temperature (TC/RTD)
-
Generators: Stator winding temperature (RTD)
-
Offshore platforms: Salt-spray environments requiring conformal coating
-
Nuclear Power Plants: Redundant temperature monitoring for safety
Comparison with DTCIH1AA and Competitors
| Feature | GE IS210DTRTH1AA | GE IS210DTCIH1AA | Competitor A | Competitor B |
|---|---|---|---|---|
| Channels | 8 (dual) / 16 inputs | 8 (dual) / 16 inputs | 8 (single) | 8 (dual) |
| Sensor Types | TC or RTD (per channel) | TC only + 4–20 mA | TC only | TC or RTD |
| TC Accuracy | ±0.08% + ±0.4 °C | ±0.08% + ±0.4 °C | ±0.2% + ±1 °C | ±0.1% + ±0.5 °C |
| RTD Accuracy | ±0.08% + ±0.3 °C | N/A | N/A | ±0.1% + ±0.5 °C |
| Redundancy Logic | Average/Diff/Max/Min | Average/Diff/Max/Min | No | No |
| Coating | Standard | Standard | Optional | Optional |
| Temp Range | –25 to +70 °C | –25 to +70 °C | 0 to +55 °C | –10 to +55 °C |
Selection Guidelines
-
When to choose: Applications requiring redundant temperature monitoring with mixed TC and RTD sensors.
-
When to choose DTCIH1AA instead: Applications needing 4–20 mA inputs instead of RTD support.
-
Redundancy Logic: Configure average for normal operation; difference for fault detection.
-
Sensor Configuration: Configure per channel for TC or RTD type in Toolbox ST.
-
RTD Wiring: Use 4-wire for highest accuracy; 3-wire for standard applications.
-
Coating Verification: Inspect under UV (365 nm) upon receipt.
-
Compatibility: Fits all Mark VIe VME64x racks. Requires ControlST v6.0 or higher.
Operational Precautions
-
Wiring: Follow GE wiring diagrams—correct polarity and shield grounding essential.
-
Dual-Sensor Wiring: Ensure both sensors are correctly wired per channel.
-
Redundancy Logic Testing: Simulate one sensor failure to verify redundancy logic.
-
TC/RTD Configuration: Ensure correct sensor type is configured per channel.
-
RTD Lead-Wire Compensation: Verify 3-wire or 4-wire configuration matches wiring.
-
Calibration: Factory calibrated—verify against known references during commissioning.
-
LED Diagnostics: Green = normal; Amber = sensor fault/difference; Red = module fault.
-
Fault Log: Access 750-event log via Toolbox ST.
-
Coating Care: Use GE-approved cleaner; inspect annually under UV.
-
Hot-Swap: Remove/insert slowly under power.
-
Spare Stock: Maintain 1 spare per 3–4 racks.
-
ESD: Handle by edges with grounded wrist strap.
-
Storage: Anti-static bag with desiccant at –40 to +85 °C; rotate every 3 years.
A-B 1756-PA75/A
A-B 1756-PA72/C
GE IC660BBA021
HONEYWELL 51202329-606
Reviews
There are no reviews yet.