Description
Key Specifications
| Parameter | Specification |
|---|---|
| Analog Inputs | 8 differential analog input channels |
| Analog Input Range | 4–20 mA, 0–10 V, ±10 V, thermocouple (J, K, T, E, N, R, S, B), RTD (Pt100, 3-wire) — software-selectable |
| Analog Input Resolution | 24-bit ADC |
| Analog Input Accuracy | ±0.05% of full scale |
| Bridge Sensor Inputs | 4 dedicated bridge sensor inputs (strain gauges, load cells, pressure transducers) |
| Bridge Excitation | Programmable (0.5 V, 1 V, 2.5 V, 5 V, 10 V) |
| Bridge Sensor Resolution | 24-bit ADC |
| Bridge Sensor Accuracy | ±0.05% of full scale |
| Pulse/Frequency Inputs | 4 high-speed pulse/frequency input channels |
| Pulse Input Range | 0.5 Hz to 50 kHz (magnetic pickups, proximity probes, encoders) |
| Pulse Input Voltage | 100 mV to 100 V p-p (magnetic); 5–24 VDC (proximity/encoder) |
| Pulse Accuracy | ±0.01% of reading |
| Isolation | 1500 VDC (I/O-to-backplane) |
| Diagnostics | 500-event fault log with timestamps |
| Communication | I/O Net (dual Ethernet ports for redundancy) |
| Form Factor | 6U VME64x (160 × 233 mm), single-slot width |
| Indicators | Per-channel LED (signal OK/fault), module health, communication status |
| Operating Temp | 0 °C to +60 °C |
| Power Draw | 14 W (+5 V / +3.3 VDC) |
| Connectors | Front-panel 48-pin terminal block with gold-plated contacts and captive washer screws |
Advantages & Distinctive Features
-
Multi-Signal Acquisition: Combines analog, bridge, and pulse/frequency inputs in one module.
-
Versatile Analog Inputs: Accepts 4–20 mA, 0–10 V, ±10 V, thermocouples, and RTDs.
-
Dedicated Bridge Sensor Inputs: 4 bridge inputs with programmable excitation for strain gauges, load cells, and pressure transducers.
-
High-Speed Pulse Inputs: 4 pulse/frequency channels for speed sensors, flowmeters, and encoders.
-
Programmable Bridge Excitation: 0.5 V to 10 V for optimal sensor performance.
-
High Accuracy: ±0.05% (analog) and ±0.01% (pulse) for critical measurements.
-
Gold-Plated Captive Washer Terminals: Corrosion-resistant and vibration-proof.
-
Hot-Swappable: No rack power-down for replacement.
-
Direct Retrofit: Replaces older BAPA series boards.
Application Fields
-
Gas Turbines: Exhaust temperature (TC), bearing RTDs, pressure transducers (bridge), speed measurement (pulse)
-
Steam Turbines: Casing temperature, bearing RTDs, pressure monitoring, speed measurement
-
Compressors: Inlet/discharge monitoring, pressure transducers, speed monitoring
-
Generators: Stator temperature, bearing RTDs, speed measurement
-
Strain Gauge Applications: Load cells, pressure transducers, torque measurement
Comparison with Competitors
| Feature | GE IS210BAPAH1A | Competitor A | Competitor B |
|---|---|---|---|
| Analog Inputs | 8 (TC/RTD/4-20mA/Voltage) | 8 (4-20mA only) | 8 (TC/RTD only) |
| Bridge Inputs | 4 (with excitation) | None | None |
| Pulse Inputs | 4 (up to 50 kHz) | None | None |
| ADC Resolution | 24-bit | 16-bit | 16-bit |
| Hot-Swappable | Yes | No | Yes |
Selection Guidelines
-
When to choose: Applications requiring mixed-signal acquisition—analog, bridge, and pulse sensors in one module.
-
Bridge Configuration: Configure excitation voltage per manufacturer specifications.
-
Pulse Configuration: Set scaling (pulses per revolution or per unit flow).
-
Compatibility: Fits all Mark VIe VME64x racks. Requires ControlST v6.0 or higher.
Operational Precautions
-
Wiring: Follow GE wiring diagrams—correct polarity and shield grounding essential.
-
Bridge Excitation: Verify excitation voltage does not exceed sensor manufacturer specifications.
-
Pulse Input: Verify input voltage range matches sensor output.
-
Calibration: Factory calibrated—verify against known references during commissioning.
-
LED Diagnostics: Green = normal; Amber = fault/marginal; Red = module fault.
-
Fault Log: Access 500-event log via Toolbox ST.
-
Hot-Swap: Remove/insert slowly under power.
-
Spare Stock: Maintain 1 spare per 3–4 racks.
-
ESD: Handle by edges with grounded wrist strap.
A-B 1786-RPFM
SIMCO 4000636 F 267
FANUC A860-2000-T301
Reviews
There are no reviews yet.