Description
Product Parameters
| Parameter | Specification |
|---|---|
| Brand / Series | GE Mark VIe Speedtronic |
| Model | IS200TSVCH2A |
| Servo Valve Channels | 8 independent channels — upgraded from 4 channels |
| Command Output | ±10 VDC (programmable per channel, 16-bit DAC) |
| Output Current | ±20 mA (short-circuit protected) |
| Position Feedback Inputs | 8 channels (0–10 V, ±10 V, or 4–20 mA selectable) |
| Feedback ADC Resolution | 16-bit SAR (10–500 SPS) |
| Feedback Accuracy | ±0.1% FS |
| Diagnostics | Command output open/short detection, feedback open-circuit detection, feedback over/under-range monitoring, reference validation |
| Status Indication | 8 green LEDs (command active), 8 red LEDs (fault per channel), 2 red summary fault LEDs, 1 yellow LED (reference/calibration status) |
| Isolation | 2000 VAC (field-to-system) — upgraded from 1500 VAC |
| Operating Temperature | –40°C to +70°C — upgraded from –30°C to +65°C |
| Storage Temperature | –55°C to +85°C |
| Mounting | VME rack-mount terminal board with front-panel I/O connectors |
| Backplane Interface | VME64x (A24/A32, D16/D32/D64) |
| EMC Compliance | IEC 61000-4 Level 4 |
Advantages & Key Features
-
High Channel Density: 8 independent servo valve channels in a single VME slot—double the density of IS200TSVCH1A (4 channels) and four times that of competing 2-channel modules. Ideal for large turbine systems with multiple servo valve actuators.
-
High-Resolution Command Output: 16-bit DAC provides precise servo valve control.
-
Integrated Position Feedback: Each channel includes dedicated feedback input for closed-loop position control.
-
Versatile Feedback Inputs: Supports 0–10 V, ±10 V, or 4–20 mA feedback signals.
-
Extended Temperature Range: –40°C to +70°C operation makes IS200TSVCH2A suitable for extreme environments.
-
Enhanced Isolation: 2000 VAC isolation provides superior protection for the Mark VIe backplane.
-
Comprehensive Diagnostics: Command output open/short, feedback open-circuit, feedback over/under-range, and reference validation per channel.
-
Short-Circuit Protection: Outputs protected against short circuits.
-
High-Density Status Indication: 8 green/red LEDs enable rapid on-site troubleshooting.
-
ToolboxST Integration: Full configuration, monitoring, and diagnostics via GE ToolboxST.
-
Drop-In Replacement: Direct replacement for IS200TSVCH1A and earlier servo valve terminal boards.
Application Fields
-
Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Fuel gas servo valve control, steam admission valve control, inlet guide vane (IGV) position control.
-
Combined Cycle Plants: Steam turbine valve position control.
-
Aeroderivative Turbines: Fuel control and IGV positioning.
-
Compressor Stations: Anti-surge valve control.
-
Arctic & Desert Installations: Extreme-environment servo valve control applications.
-
Large Turbine Systems: Multiple servo valve actuators requiring high channel density.
Comparison with Competing Products
| Feature | GE IS200TSVCH2A | GE IS200TSVCH1A (4-ch) | Competitor A (Servo Valve Module) | Competitor B (Analog Output Module) |
|---|---|---|---|---|
| Channels | 8 | 4 | 2 | 4 |
| Command Resolution | 16-bit | 16-bit | 14-bit | 16-bit |
| Feedback Inputs | Yes (8) | Yes (4) | No | No |
| Diagnostics | Command open/short, feedback open/over/under, reference | Command open/short, feedback open/over/under | Command only | Output only |
| Isolation | 2000 VAC | 1500 VAC | 1000 VAC | 500 VDC |
| Operating Temp | –40°C to +70°C | –30°C to +65°C | 0°C to 50°C | 0°C to 60°C |
| Reference Validation | Yes | No | No | No |
Key Advantage: IS200TSVCH2A provides 8 servo valve channels—double the density of IS200TSVCH1A and four times that of competing modules—with integrated position feedback, 16-bit command resolution, 2000 VAC isolation, extended –40°C to +70°C temperature range, and comprehensive diagnostics including reference validation, making it ideal for large turbine systems requiring high-density servo valve control in extreme environments.
Selection Guidelines & Recommendations
-
Channel Count: Up to 8 servo valves per board—ideal for large turbine systems.
-
Command Output: Configure ±10 VDC command output in GE ToolboxST.
-
Feedback Type: Select feedback input type (0–10 V, ±10 V, or 4–20 mA) per channel.
-
Diagnostic Configuration: Enable command output and feedback diagnostics for critical servo valve circuits.
-
Controller Firmware: Requires Mark VIe processor firmware v8.5 or later.
-
Wiring Guidelines: Use shielded twisted-pair cables for command and feedback signals.
-
Spare Strategy: Keep one spare per turbine; lead times 8–12 weeks.
-
Retrofit: Direct replacement for IS200TSVCH1A—regenerate configuration in GE ToolboxST for 8-channel mapping.
Important Cautions
-
No Hot-Swap: De-energize rack before insertion/removal.
-
Output Short: Command outputs are short-circuit protected but sustained shorts may cause thermal shutdown.
-
Feedback Polarity: Observe correct polarity for feedback connections.
-
Grounding: Connect AGND to Mark VIe system ground at single star point.
-
Shield Termination: Ground signal cable shields only at cabinet end.
-
ESD Handling: Use grounded wrist straps; field repair not possible.
-
Temperature Rating: Verify cabinet ambient does not exceed +70°C or fall below –40°C.
-
Reference Validation: Yellow LED indicates reference drift—schedule factory recalibration if illuminated.
-
Channel Mapping: With 8 channels, verify field wiring maps to correct ToolboxST channel numbers.
BENTLY 125840-01
FOXBORO FBM201
FOXBORO FBM03
Reviews
There are no reviews yet.