Description
Product Parameters
| Parameter | Specification |
|---|---|
| Brand / Series | GE Mark VIe Speedtronic |
| Model | IS200TICIH1A |
| Discrete Inputs | 32 isolated channels (dry contact / volt-free) |
| Input Voltage Range | 24/48/125 VDC (auto-ranging, opto-isolated) |
| Input Current | 3–6 mA typical |
| Debounce Time | Programmable 0–100 ms (default 6 ms) |
| Event Time-Stamp Resolution | 1 ms (hardware-based) |
| Isolation | 1500 VAC (channel-to-channel and field-to-system) |
| Diagnostics | Open-wire detection, short-circuit detection, stuck-contact monitoring |
| Status Indication | 32 green LEDs (input active), 2 red LEDs (diagnostic fault summary) |
| Operating Temperature | –30°C to +65°C |
| Storage Temperature | –55°C to +85°C |
| Mounting | VME rack-mount terminal board with front-panel I/O connectors |
| Backplane Interface | VME64x (A24/A32, D16/D32/D64) |
| EMC Compliance | IEC 61000-4 Level 4 |
Advantages & Key Features
-
High Channel Density: 32 isolated discrete inputs in a single VME slot—double the density of IS200STCIH1A (24 channels) and four times that of competing 8-channel modules. Ideal for turbines with extensive switch monitoring requirements.
-
Wide Voltage Compatibility: Auto-ranging 24/48/125 VDC input allows direct connection to legacy plant battery systems.
-
Programmable Debouncing: Onboard per-channel debounce logic (0–100 ms) eliminates false trips from contact bounce in vibration-heavy environments.
-
1 ms Hardware Time-Stamping: Enables sequence-of-events (SOE) recording for post-trip forensic analysis.
-
Comprehensive Diagnostics: Open-wire, short-circuit, and stuck-contact monitoring per channel enable predictive maintenance.
-
Opto-Isolation: 1500 VAC optical isolation protects the Mark VIe main chassis from field wiring faults.
-
High-Density Status Indication: 32 green LEDs enable rapid on-site channel status identification.
-
ToolboxST Integration: Full configuration, monitoring, and diagnostics via GE ToolboxST.
-
Drop-In Replacement: Direct replacement for earlier GE discrete input terminal boards.
Application Fields
-
Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Emergency stop pushbuttons, bearing vibration trip contacts, exhaust temperature switch alarms, fuel gas valve limit switches, flame detector relay contacts, lube oil pressure switches, cooling water flow switches, generator status contacts.
-
Combined Cycle Plants: HRSG drum level switches, steam pressure switches, condensate pump status, bypass valve position switches.
-
Compressor Stations: Suction/discharge pressure switches, surge control permissives, filter differential pressure switches.
-
Hydropower Plants: Gate position switches, brake status contacts, cooling water flow switches.
Comparison with Competing Products
| Feature | GE IS200TICIH1A | GE IS200TBCIH1A (32-ch) | Competitor A (Emerson) | Competitor B (Siemens) |
|---|---|---|---|---|
| Discrete Inputs | 32 isolated | 32 isolated | 8 isolated | 8 isolated |
| Voltage Range | 24/48/125 VDC | 24/48/125 VDC | 24 VDC only | 24 VDC only |
| Debounce | 0–100 ms (per-channel) | 0–100 ms (per-channel) | Fixed 10 ms | Programmable (global) |
| Time-Stamping | 1 ms hardware | 1 ms hardware | 5 ms software | 2 ms software |
| Isolation | 1500 VAC | 1500 VAC | 1000 VAC | 500 VDC |
| Operating Temp | –30°C to +65°C | –30°C to +65°C | 0°C to 50°C | 0°C to 60°C |
Key Advantage: IS200TICIH1A provides 32 isolated discrete inputs with wide voltage compatibility, per-channel debouncing, and 1 ms hardware time-stamping—making it a high-density solution for turbine monitoring applications.
Selection Guidelines & Recommendations
-
Channel Count: 32 channels per board—sufficient for most turbine systems.
-
Voltage Verification: Confirm plant battery voltage—the board auto-ranges for 24/48/125 VDC.
-
Debounce Configuration: For vibration-prone switches, set 10–20 ms. For safety circuits (ESD), use 0–6 ms.
-
Event Time-Stamping: Enable SOE recording via GE ToolboxST—requires controller firmware v7.0 or later.
-
Controller Firmware: Requires Mark VIe processor firmware v7.0 or later.
-
Spare Strategy: Keep one spare per turbine; lead times 6–8 weeks.
-
Retrofit: Direct replacement—regenerate configuration in GE ToolboxST for 32-channel mapping.
Important Cautions
-
No Hot-Swap: De-energize rack before insertion/removal.
-
Wiring Polarity: Observe correct polarity for DC inputs—reverse polarity triggers fault LED.
-
Grounding: Connect ISO_GND to chassis ground at single star point.
-
Shield Termination: Ground shields only at cabinet end.
-
ESD Handling: Use grounded wrist straps; field repair not possible.
-
Debounce Trade-Off: Higher debounce rejects bounce but introduces delay—set as low as possible for safety circuits.
-
Channel Mapping: With 32 channels, verify field wiring maps to correct ToolboxST channel numbers.
-
Input Current: Ensure plant battery supply provides sufficient current for all 32 channels (3–6 mA per channel = 96–192 mA total plus margin).
SCHNEIDER 140CPS12420
A-B 1756-IF16
Schneider 140CRA93200
A-B 1756-IF8
Reviews
There are no reviews yet.