Description
Product Parameters
| Parameter | Specification |
|---|---|
| Brand / Series | GE Mark VIe Speedtronic |
| Model | IS200STAIS2ACB |
| Input Channels | 32 isolated analog inputs |
| Input Types | 4–20 mA only (software-selectable: 0–20 mA, 4–20 mA) |
| ADC Resolution | 16-bit SAR with programmable sampling rate (10–500 SPS) |
| Accuracy | ±0.05% FS (25°C), ±0.1% over full temp range — upgraded from ±0.1% / ±0.2% |
| Loop Power | Externally supplied only (no internal loop power) |
| Input Impedance | 250 Ω |
| Filtering | Programmable 1–50 Hz with enhanced anti-aliasing |
| Isolation | 2000 VAC — upgraded from 1500 VAC |
| CMRR | >110 dB @ 50/60 Hz — upgraded from >100 dB |
| Diagnostics | Open-circuit, over/under-range, loop power fault, reference voltage self-validation |
| Status Indication | 32 green LEDs (channel active), 2 red LEDs (fault summary), 1 yellow LED (calibration status) |
| Operating Temperature | –30°C to +65°C |
| Storage Temperature | –55°C to +85°C |
| Mounting | VME rack-mount with front I/O connector |
| Backplane Interface | VME64x (A24/A32, D16/D32/D64) |
| EMC Compliance | IEC 61000-4 Level 4 |
Advantages & Key Features
-
Maximum Channel Density: 32 isolated inputs per board—double the density of IS200STAIH1A (16 channels) and four times that of competing 8-channel modules.
-
Superior Accuracy: ±0.05% FS accuracy provides highest precision for critical turbine control loops.
-
Enhanced Isolation & CMRR: 2000 VAC isolation and >110 dB CMRR for stable readings in high-EMI environments.
-
Current-Only Inputs: Dedicated 4–20 mA inputs simplify configuration and reduce setup errors.
-
Comprehensive Diagnostics: Open-circuit, over/under-range, loop power fault, and reference voltage self-validation per channel.
-
ToolboxST Integration: Full configuration, calibration, and diagnostics via GE ToolboxST.
-
Drop-In Replacement: Direct replacement for IS200STAIS2A and earlier analog input boards.
Application Fields
-
Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Bearing temperatures, lube oil pressure/temperature, fuel pressure/flow, steam pressure/temperature, cooling water, valve position.
-
Combined Cycle Plants: HRSG feedwater flow, steam drum pressure, superheater temperature, condensate flow.
-
Compressor Stations: Suction/discharge pressure, gas flow, vibration, intercooler temperature.
-
Nuclear & Offshore: Applications requiring high accuracy and enhanced EMC immunity.
Comparison with Competing Products
| Feature | GE IS200STAIS2ACB | GE IS200STAIS2A | Competitor A (Emerson) | Competitor B (Siemens) |
|---|---|---|---|---|
| Channels | 32 isolated | 32 isolated | 8 isolated | 8 non-isolated |
| Accuracy | ±0.05% FS | ±0.1% FS | ±0.2% FS | ±0.15% FS |
| Isolation | 2000 VAC | 1500 VAC | 1000 VAC | 500 VDC |
| CMRR | >110 dB | >100 dB | >80 dB | >85 dB |
| Reference Self-Validation | Yes | No | No | No |
| EMC Filtering | IEC Level 4 | IEC Level 4 | Level 2 | Level 1 |
Key Advantage: IS200STAIS2ACB delivers 32 inputs with ±0.05% accuracy, 2000 VAC isolation, and reference self-validation—the highest channel density and precision in the Mark VIe analog family.
Selection Guidelines & Recommendations
-
Sensor Type: 4–20 mA current-output sensors only. For voltage sensors, use IS200STAIH series.
-
Loop Power: External 24 VDC supplies required—plan cabinet power distribution accordingly.
-
Filtering: Use 1–10 Hz for temperature/pressure, 20–50 Hz for dynamic signals.
-
Controller Firmware: Requires Mark VIe processor firmware v8.0 or later.
-
Spare Strategy: Keep one spare per turbine; lead times 8–12 weeks.
-
Retrofit: Direct replacement—regenerate configuration in GE ToolboxST to access enhanced diagnostics.
Important Cautions
-
No Hot-Swap: De-energize rack before insertion/removal.
-
External Loop Power Required: No internal loop power—ensure 24 VDC supplies are connected.
-
Input Overload: Sustained input >50 mA may damage circuitry.
-
Grounding: Connect AGND to Mark VIe system ground at single star point.
-
Shield Termination: Ground shields only at cabinet end.
-
ESD Handling: Use grounded wrist straps; field repair not possible.
-
Filtering Trade-Off: Lower cutoff = better noise rejection but more signal delay.
-
Power Supply Sizing: 20–30 mA per channel × 32 channels = 0.64–0.96 A minimum.
-
Reference Validation: Yellow LED indicates calibration drift—schedule factory recalibration.
-
Channel Mapping: Verify field wiring correctly maps to ToolboxST channel assignments.
WESTINGHOUSE 1C31227G01
NI PCI-6602
SCHNEIDER 140CPU11302
NI SCXI-1125
Reviews
There are no reviews yet.