Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200JPDMG1A |
| Pulse Inputs | 4–8 pulse inputs (J-type, speed, flow, position sensors) |
| Data Management | Pulse data routing, storage, and analysis |
| J-Type Gateway Functions | Data routing, protocol conversion, gateway communication |
| Supported Protocols | Modbus RTU, GE pulse protocols, J-type protocols |
| Communication | J-type serial interfaces, highway integration |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 108,000 hours |
| Revision Note | “A” suffix = specific hardware/firmware configuration |
Advantages and Key Features
Dedicated J-Gateway Pulse Data Management: The IS200JPDMG1A provides comprehensive pulse data management and J-type gateway communication.
Data Management Functions: The IS200JPDMG1A handles routing, storage, and analysis.
J-Type Gateway Functions: Enables data routing and protocol conversion.
Application Fields and Case Studies
Used in pulse data management applications, J-type network integration, and gateway communication for pulse data. In a 600 MW plant, the IS200JPDMG1A provided reliable J-gateway pulse data management.
Comparison with Competing Products
| Dimension | IS200JPDMG1A | IS200JPDLG1ABC | IS200JPDAG1A |
|---|---|---|---|
| Primary Function | Pulse data management | Pulse data logger | Pulse data acquisition |
| Data Management | Yes | No | No |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200JPDMG1A for pulse data management and J-type gateway applications. Verify compatibility with your specific pulse sensors and data management requirements. Deploy for comprehensive pulse data handling.
Precautions and Important Notes
Use ESD-safe handling. Verify field wiring and pulse connections. Confirm compatibility with your specific pulse sensors and data management requirements. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix variants in redundant pairs. Allow 30 seconds boot time. Test all data management and gateway functions during commissioning. The IS200JPDMG1A is critical for pulse data management – ensure all settings are verified before placing in service. Ensure proper shielding for pulse signals to avoid noise interference. Regular verification of pulse data quality and data management performance is recommended. Ensure communication cabling does not exceed maximum recommended length.
NI 9203
E+H FMU30-10A1/0
Honeywell FC-DCCOM-232/485
Reviews
There are no reviews yet.