Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200JPDBG1ABB |
| Pulse Inputs | 4–8 pulse inputs (J-type, speed, flow, position sensors) |
| Bridge Functions | Pulse data bridging, data routing, network translation (specialized) |
| J-Type Gateway Functions | Data routing, protocol conversion, gateway communication |
| Supported Protocols | Modbus RTU, GE pulse protocols, J-type protocols (variant-specific) |
| Communication | J-type serial interfaces, highway integration |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 108,000 hours |
| Suffix Meaning | “ABB” = specific firmware/configuration for specialized bridging applications |
Advantages and Key Features
Specialized J-Gateway Pulse Data Bridge: The IS200JPDBG1ABB provides pulse data bridging with the “ABB” firmware configured for specialized bridging applications and specific J-type network architectures.
Specialized Bridging Features: Optimized for specific bridging requirements.
Enhanced Protocol Handling: Improved pulse data routing for specific applications.
J-Type Gateway Functions: The IS200JPDBG1ABB handles protocol conversion and data routing.
Pre-Configured Firmware: “ABB” firmware reduces commissioning time.
Application Fields and Case Studies
Used in pulse data bridging applications with specialized network requirements, J-type network integration with specific architectures, and gateway communication for pulse data. In a 600 MW plant with specialized bridging requirements, the IS200JPDBG1ABB was selected for its specialized features.
Comparison with Competing Products
| Dimension | IS200JPDBG1ABB | IS200JPDBG1ABA | IS200JPDBG1A |
|---|---|---|---|
| Primary Function | Pulse data bridge | Pulse data bridge | Pulse data bridge |
| Firmware Features | Specialized (ABB) | Enhanced (ABA) | Standard |
| Bridging Support | Specific applications | Expanded | Standard |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200JPDBG1ABB when your J-gateway pulse bridging application requires specialized support for specific network architectures. Verify “ABB” firmware matches your specific bridging and protocol requirements before commissioning.
Precautions and Important Notes
Use ESD-safe handling. Verify field wiring and pulse connections. Confirm “ABB” firmware supports your specific pulse sensors and bridging requirements. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix IS200JPDBG1ABB with other variants in redundant pairs without verifying identical firmware. Allow 30 seconds boot time. Test all bridging and gateway functions during commissioning. If replacing another variant with the IS200JPDBG1ABB, verify all network configurations are compatible with the new firmware before installation. Ensure proper shielding for pulse signals to avoid noise interference. Ensure communication cabling does not exceed maximum recommended length. The IS200JPDBG1ABB is critical for pulse data bridging – ensure all settings are verified before placing in service. Regular verification of pulse data quality and bridging performance is recommended.
GE IC200ALG262
GE IC200UAL005
ABB AFIN-01C 64693808
A-B 1756-PA75B
Reviews
There are no reviews yet.