Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200HFPAG1AEC |
| Pulse Inputs | 4–8 high-frequency pulse inputs (speed sensors, encoders) |
| Pulse Outputs | 4–8 high-frequency pulse outputs (actuator control, synchronization) |
| Frequency Range | 0 Hz to 150 kHz (typical, variant-dependent) |
| Signal Processing | Amplification, filtering, pulse shaping, frequency multiplication/division (advanced) |
| Communication Interfaces | 2× configurable ports (RS-485 / fieldbus) |
| Supported Protocols | Modbus RTU, DNP3, IEC 61850, GE pulse protocols (variant-specific) |
| Control Functions | Speed sensing, position feedback, pulse generation for actuators |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 108,000 hours |
| Suffix Meaning | “AEC” = specific firmware/configuration for expanded protocol support and grid compliance |
Advantages and Key Features
Advanced High-Frequency Pulse Amplifier/Generator with Expanded Protocol Support: The IS200HFPAG1AEC provides high-speed pulse processing with the “AEC” firmware configured for expanded protocol support including IEC 61850 and DNP3.
Grid Compliance Features: Enhanced capabilities for grid synchronization and frequency matching.
Advanced Protocol Support: Supports Modbus RTU, DNP3, and IEC 61850.
Multiple Input/Output Channels: Handles 4–8 pulse inputs and outputs.
Pre-Configured Firmware: “AEC” firmware reduces commissioning time for advanced applications.
Application Fields and Case Studies
Used in high-frequency pulse applications requiring expanded protocol support, grid compliance, and demanding control applications. In a 600 MW plant with grid compliance requirements, the IS200HFPAG1AEC provided advanced protocol support and grid synchronization features.
Comparison with Competing Products
| Dimension | IS200HFPAG1AEC | IS200HFPAG1ADC | IS200HFPAG1ACB |
|---|---|---|---|
| Primary Function | Pulse amplifier/generator | Pulse amplifier/generator | Pulse amplifier/generator |
| Protocol Support | + IEC 61850, DNP3 | Standard | Advanced |
| Grid Compliance | Enhanced | Enhanced | Standard |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200HFPAG1AEC when your high-frequency pulse application requires expanded protocol support (IEC 61850, DNP3) or grid compliance features. Verify “AEC” firmware matches your specific requirements before commissioning.
Precautions and Important Notes
Use ESD-safe handling. Verify field wiring and pulse connections. Confirm “AEC” firmware supports your specific sensors, actuators, and protocol requirements. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix IS200HFPAG1AEC with other variants in redundant pairs without verifying identical firmware. Allow 30 seconds boot time. Test all pulse generation, amplification, and communication functions during commissioning. If replacing another variant with the IS200HFPAG1AEC, verify all sensors and protocol requirements are compatible with the new firmware before installation. Ensure proper shielding for high-frequency pulse signals. The IS200HFPAG1AEC is critical for grid compliance applications – ensure all timing, synchronization, and protocol settings are correctly configured before placing in service. Regular verification of communication and synchronization performance is recommended.
GE IC693BEM331D
A-B 1756-IF16
A-B 1785-LT2
GE IC670ALG310
Reviews
There are no reviews yet.