Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200JPDBG1ABA |
| Pulse Inputs | 4–8 pulse inputs (J-type, speed, flow, position sensors) |
| Bridge Functions | Pulse data bridging, data routing, network translation (enhanced) |
| J-Type Gateway Functions | Data routing, protocol conversion, gateway communication |
| Supported Protocols | Modbus RTU, GE pulse protocols, DNP3, J-type protocols |
| Communication | J-type serial interfaces, highway integration |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 108,000 hours |
| Suffix Meaning | “ABA” = specific firmware/configuration for enhanced bridging and protocol support |
Advantages and Key Features
Enhanced J-Gateway Pulse Data Bridge: The IS200JPDBG1ABA provides pulse data bridging with the “ABA” firmware configured for enhanced bridging features and expanded protocol support.
Expanded Protocol Support: Includes DNP3 for enhanced network integration.
Enhanced Bridging Features: Improved pulse data routing and network translation.
J-Type Gateway Functions: The IS200JPDBG1ABA handles protocol conversion and data routing.
Pre-Configured Firmware: “ABA” firmware reduces commissioning time.
Application Fields and Case Studies
Used in pulse data bridging applications with expanded protocol requirements, J-type network integration with DNP3 support, and gateway communication for pulse data. In a 600 MW plant with DNP3 bridging requirements, the IS200JPDBG1ABA provided enhanced bridging features and reliable gateway communication.
Comparison with Competing Products
| Dimension | IS200JPDBG1ABA | IS200JPDBG1A | IS200JPDAG1A |
|---|---|---|---|
| Primary Function | Pulse data bridge | Pulse data bridge | Pulse data acquisition |
| Protocol Support | + DNP3 | Standard | Standard |
| Bridging Features | Enhanced | Standard | No |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200JPDBG1ABA when your J-gateway pulse bridging application requires expanded protocol support (DNP3) or enhanced bridging features. Verify “ABA” firmware matches your specific bridging and protocol requirements before commissioning.
Precautions and Important Notes
Use ESD-safe handling. Verify field wiring and pulse connections. Confirm “ABA” firmware supports your specific pulse sensors and bridging requirements. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix IS200JPDBG1ABA with IS200JPDBG1A in redundant pairs without verifying identical firmware. Allow 30 seconds boot time. Test all bridging and gateway functions during commissioning. If replacing an IS200JPDBG1A with an IS200JPDBG1ABA, verify all network configurations are compatible with the new firmware before installation. Ensure proper shielding for pulse signals to avoid noise interference. Ensure communication cabling does not exceed maximum recommended length. The IS200JPDBG1ABA is critical for pulse data bridging – ensure all settings are verified before placing in service. Regular verification of pulse data quality and bridging performance is recommended.
SLIMPAK G448-0002
GE IC200ALG263
GE IC200ALG263
Reviews
There are no reviews yet.