Description
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | General Electric |
| Model | IS200ICBDH1A |
| I/O Controller Functions | I/O management, data acquisition, controller coordination |
| Bus Driver Functions | Highway bus communication, bus arbitration, data routing |
| Highway Interface | 2× bus highway ports (GE proprietary protocol) |
| Supported Protocols | GE bus highway, Modbus RTU |
| I/O Support | Digital I/O, analog I/O, data acquisition coordination |
| Power | +5V DC / 2.0A, ±15V DC / 0.4A |
| Temp Range | -30°C to +65°C |
| MTBF | > 108,000 hours |
| Revision Note | “A” suffix = specific hardware/firmware configuration |
Advantages and Key Features
Dedicated I/O Controller and Bus Driver Interface: The IS200ICBDH1A provides I/O management and bus driver functions for distributed I/O networks.
I/O Controller Functions: Handles data acquisition, I/O coordination, and controller management.
Bus Driver Support: Manages highway bus communication and data routing.
Highway Communication: The IS200ICBDH1A integrates with distributed I/O networks.
Application Fields and Case Studies
Used in I/O controller management, bus driver applications, and distributed I/O network coordination. In a 600 MW plant, the IS200ICBDH1A provided I/O management and bus driver functions for reliable data acquisition.
Comparison with Competing Products
| Dimension | IS200ICBDH1A | IS200HSLAH2ADE | IS200EISBH1AAC |
|---|---|---|---|
| Primary Function | I/O controller + bus driver | Logic + actuator + highway | I/O scanner |
| Bus Driver Support | Yes | No | No |
| I/O Management | Yes | Limited | Yes |
| VME Integration | Direct | Direct | Direct |
Selection Recommendations
Choose IS200ICBDH1A for I/O controller management and bus driver applications. Verify compatibility with your I/O and bus highway requirements. Deploy for distributed I/O coordination.
Precautions and Important Notes
Use ESD-safe handling. Verify field wiring and highway connections. Confirm compatibility with your specific I/O and bus requirements. Never interrupt firmware updates. Board draws 2.0A – verify rack power capacity. Document all configurations. Store spares in anti-static packaging. Do not mix variants in redundant pairs. Allow 30 seconds boot time. Test all I/O and bus driver functions during commissioning. The IS200ICBDH1A is critical for I/O management – ensure all controller and bus settings are verified before placing in service. Ensure highway cabling does not exceed maximum recommended length. Regular verification of bus communication and I/O performance is recommended.
A-B 1756-IF16
SCHNEIDER BMXP342020
SCHNEIDER 140ACO02000
GE IC693BEM331
Reviews
There are no reviews yet.