Description
Key Specifications
| Parameter | Specification |
|---|---|
| Fiber Optic Ports | 2 independent transceivers (TX/RX) |
| Data Rate | 10/100 Mbps |
| Fiber Type | Multimode (62.5/125 µm or 50/125 µm) or Single-mode (configurable) |
| Connector Type | ST or SC (variant dependent) |
| Transmission Distance | Up to 2 km (MM) or 15 km (SM) |
| Protocol Support | I/O Net, Modbus TCP, EtherNet/IP |
| Isolation | Complete galvanic isolation (optical) |
| Diagnostics | 500-event fault log with optical link quality monitoring |
| Form Factor | 6U VME64x, single-slot |
| Indicators | Port status (link/activity), optical signal quality, module health |
| Operating Temp | 0 °C to +60 °C |
| Power Draw | 8 W (+5 V / +3.3 VDC) |
| Connectors | Front-panel ST/SC fiber optic ports |
Advantages & Features
-
Complete Electrical Isolation: Optical transmission provides immunity to EMI/RFI and eliminates ground loops.
-
Long-Distance Communication: Up to 2 km (multimode) or 15 km (single-mode)—ideal for remote I/O and field devices.
-
Noise Immunity: Ideal for environments near VFDs, high-voltage equipment, and welding gear.
-
High-Speed Data Exchange: 10/100 Mbps supports real-time turbine control data.
-
Dual Redundant Ports: Two independent transceivers for redundancy.
-
Optical Link Quality Monitoring: Monitors signal strength for predictive maintenance.
-
Hot-Swappable: No rack power-down for replacement.
Application Fields
-
Remote I/O Racks: Communication between main control and remote cabinets
-
Field Device Communication: Connecting devices in electrically noisy environments
-
Inter-Rack Communication: Data exchange between multiple Mark VIe racks
-
Offshore Platforms: EMI-free communication in marine environments
-
Compressor Stations: Communication near VFDs and high-power equipment
Comparison with FODAG1A and Competitors
| Feature | GE IS215GFOIH1A | GE IS205FODAG1A | Competitor A | Competitor B |
|---|---|---|---|---|
| Fiber Ports | 2 | 2 | 1 | 2 |
| Data Rate | 10/100 Mbps | 10/100 Mbps | 10 Mbps | 100 Mbps |
| Transmission Distance | 2 km (MM) / 15 km (SM) | 2 km / 15 km | 2 km | 2 km |
| Protocol Support | I/O Net, Modbus, EtherNet/IP | I/O Net, Modbus, EtherNet/IP | Profinet | EtherNet/IP |
| Link Quality Monitoring | Yes | Yes | No | No |
| Hot-Swappable | Yes | Yes | No | Yes |
Selection Guidelines
-
When to choose: Electrically noisy environments, long-distance communication, and remote I/O applications.
-
Fiber Type: Multimode for distances up to 2 km; single-mode for up to 15 km.
-
Connector Type: Verify ST or SC connectors match field cabling.
-
Distance Verification: Ensure cable length does not exceed optical budget.
-
Compatibility: Fits all Mark VIe VME64x racks. Requires ControlST v6.0 or higher.
Operational Precautions
-
Fiber Handling: Avoid bending cables beyond minimum bend radius.
-
Connector Cleaning: Clean connectors with approved tools before each connection.
-
Optical Power Measurement: Verify power levels during commissioning.
-
Link Quality Monitoring: Review signal trends in Toolbox ST.
-
LED Diagnostics: Green = link/active; Amber = marginal signal; Red = link fault.
-
Fault Log: Access 500-event log via Toolbox ST.
-
Hot-Swap: Remove/insert slowly under power.
-
Spare Stock: Maintain 1 spare per 3–4 racks.
-
ESD: Handle by edges with grounded wrist strap.
FISHER 67DFR/C4 ѹ
NI CDAQ 9174
GALIL DMC-9940
SCHNEIDER 140ARI03010
Reviews
There are no reviews yet.