Description
Product Parameters
| Parameter | Specification |
|---|---|
| Brand / Series | GE Mark VIe Speedtronic |
| Model | IS200VAOCH1B |
| Analog Outputs | 16 isolated channels |
| Output Types | 4–20 mA or 0–10 V (software-selectable per channel) |
| Output Range | 0–20 mA, 4–20 mA, 0–5 V, 0–10 V |
| DAC Resolution | 16-bit with programmable update rate (1–1000 SPS) |
| Accuracy | ±0.05% FS (25°C), ±0.1% over full temperature range — upgraded from ±0.1% / ±0.2% |
| Load Impedance | 0–750 Ω (current mode), > 2 kΩ (voltage mode) |
| Current Limit | 25 mA per channel (short-circuit protected) |
| Filtering | Programmable low-pass filter (1–50 Hz) |
| Isolation | 2000 VAC (field-to-system) — upgraded from 1500 VAC |
| Diagnostics | Open-circuit detection, short-circuit detection, over/under-range monitoring, reference validation |
| Status Indication | 16 green LEDs (channel active), 2 red LEDs (diagnostic fault summary), 1 yellow LED (reference/calibration status) |
| Operating Temperature | –40°C to +70°C — upgraded from –30°C to +65°C |
| Storage Temperature | –55°C to +85°C |
| Mounting | VME rack-mount terminal board with front-panel I/O connectors |
| Backplane Interface | VME64x (A24/A32, D16/D32/D64) |
| EMC Compliance | IEC 61000-4 Level 4 |
Advantages & Key Features
-
High Channel Density: 16 isolated analog outputs in a single VME slot—double the density of competing 8-channel modules.
-
Enhanced Accuracy: ±0.05% FS accuracy provides higher precision for critical actuator control.
-
Flexible Output Configuration: Each channel supports 4–20 mA or 0–10 V outputs via GE ToolboxST.
-
High Resolution: 16-bit DAC provides precise control for critical turbine parameters.
-
Extended Temperature Range: –40°C to +70°C operation makes IS200VAOCH1B suitable for extreme environments.
-
Enhanced Isolation: 2000 VAC isolation provides superior protection for the Mark VIe backplane.
-
Programmable Filtering: Onboard low-pass filter (1–50 Hz) smooths output signals.
-
Comprehensive Diagnostics: Open-circuit, short-circuit, over/under-range monitoring, and reference validation per channel.
-
Short-Circuit Protection: Each output is protected against short circuits and overcurrent conditions.
-
ToolboxST Integration: Full configuration, calibration, and diagnostics via GE ToolboxST.
-
Drop-In Replacement: Direct replacement for IS200VAOCH1A and earlier analog output terminal boards.
Application Fields
-
Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Fuel gas control valves, steam admission valves, inlet guide vane positioners, bypass valves, actuator position control.
-
Combined Cycle Plants: HRSG feedwater control valves, bypass valve positioning, steam temperature control actuators.
-
Compressor Stations: Anti-surge valve control, recycle valve positioning.
-
Aeroderivative Turbines: Fuel control actuators, variable inlet guide vanes.
-
Arctic & Desert Installations: Extreme-environment analog output applications.
Comparison with Competing Products
| Feature | GE IS200VAOCH1B | GE IS200VAOCH1A | Competitor A (Analog Output) | Competitor B (Analog Output) |
|---|---|---|---|---|
| Analog Outputs | 16 isolated | 16 isolated | 8 isolated | 8 isolated |
| Accuracy | ±0.05% FS | ±0.1% FS | ±0.2% FS | ±0.15% FS |
| Isolation | 2000 VAC | 1500 VAC | 1000 VAC | 500 VDC |
| Operating Temp | –40°C to +70°C | –30°C to +65°C | 0°C to 50°C | 0°C to 60°C |
| Reference Validation | Yes | No | No | No |
Key Advantage: IS200VAOCH1B provides 16 isolated analog outputs with enhanced accuracy (±0.05% FS), 2000 VAC isolation, extended –40°C to +70°C temperature range, and comprehensive diagnostics including reference validation—making it ideal for high-precision analog output control in extreme environments.
Selection Guidelines & Recommendations
-
Output Type: Configure 4–20 mA or 0–10 V per channel in GE ToolboxST.
-
Load Verification: Ensure connected actuators do not exceed load impedance capability.
-
Filtering: Use 1–10 Hz for smooth actuator response, 20–50 Hz for faster dynamic control.
-
Diagnostic Configuration: Enable reference validation for critical analog output circuits.
-
Controller Firmware: Requires Mark VIe processor firmware v8.5 or later.
-
Spare Strategy: Keep one spare per turbine; lead times 8–12 weeks.
-
Retrofit: Direct replacement for IS200VAOCH1A—regenerate configuration in GE ToolboxST to access enhanced features.
Important Cautions
-
No Hot-Swap: De-energize rack before insertion/removal.
-
Output Polarity: Observe correct polarity for current loops.
-
Short-Circuit Protection: While protected, sustained short circuits may cause thermal shutdown.
-
Grounding: Connect AGND to Mark VIe system ground at single star point.
-
Shield Termination: Ground output cable shields only at cabinet end.
-
ESD Handling: Use grounded wrist straps; field repair not possible.
-
Temperature Rating: Verify cabinet ambient does not exceed +70°C or fall below –40°C.
-
Reference Validation: Yellow LED indicates reference drift—schedule factory recalibration if illuminated.
-
Filtering Trade-Off: Higher filtering provides smoother output but introduces signal delay.
-
Channel Mapping: With 16 channels, verify field wiring maps to correct ToolboxST channel numbers.
WESTINGHOUSE 1C31116G04
ABB ACS355-03E-15A6-4
BENTLY 330850-50-05
Reviews
There are no reviews yet.