GE IS200TPROH2C

Product Parameters

Advantages & Key Features

• Maximum Channel Density: Up to 6 independent speed inputs in a single VME slot—the highest channel count in the Mark VIe speed probe terminal family.

• Highest Accuracy: ±0.005% reading accuracy provides the highest precision for speed measurements.

• Extended Frequency Range: 0.5 Hz to 30 kHz covers the widest range from startup to overspeed conditions.

• Extended Temperature Range: –40°C to +70°C operation makes IS200TPROH2C suitable for extreme environments.

• Enhanced Isolation: 2000 VAC isolation provides superior protection for the Mark VIe backplane.

• Signal Integrity Monitoring: Per-channel amplitude/quality monitoring detects weak or degraded sensor signals.

• Sensor Drift Detection: Tracks sensor performance over time to predict failures before they occur.

• Versatile Signal Compatibility: Supports magnetic pickups, proximity probes, TTL, and logic-level signals.

• Programmable Trigger Levels: Per-channel programmable trigger voltage and hysteresis ensure reliable detection.

• Advanced Calibration: Onboard calibration memory with traceable records and software-triggered self-calibration.

• Comprehensive Diagnostics: Open-circuit, signal loss, frequency out-of-range, signal integrity, reference validation, and sensor drift detection.

• ToolboxST Integration: Full configuration, monitoring, diagnostics, and calibration management via GE ToolboxST.

• Drop-In Replacement: Direct replacement for IS200TPROH1C and earlier speed probe terminal boards.

Application Fields

• Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Shaft speed monitoring, overspeed detection, speed control, and multi-shaft monitoring.

• Aeroderivative Turbines: Speed monitoring and overspeed protection.

• Compressor Stations: Compressor speed monitoring for multiple stages.

• Generator Speed Monitoring: Turbine-generator speed measurement.

• Multi-Shaft Applications: Speed monitoring of multiple turbine sections.

• Arctic & Desert Installations: Extreme-environment turbine speed monitoring.

• Nuclear Power Plants: Applications requiring maximum precision and documented calibration.

Comparison with Competing Products

Key Advantage: IS200TPROH2C delivers up to 6 independent speed inputs—the highest channel density in the Mark VIe speed probe terminal family—with the widest frequency range (30 kHz), highest accuracy (±0.005%), signal integrity monitoring, sensor drift detection, 2000 VAC isolation, extended –40°C to +70°C temperature range, and comprehensive calibration management—making it the ultimate solution for complex turbine speed monitoring applications requiring maximum precision, reliability, and regulatory compliance.

Selection Guidelines & Recommendations

• Input Count: Determine the number of speed inputs required—up to 6 per board.

• Sensor Type: Verify speed sensor type and configure trigger levels in GE ToolboxST.

• Signal Integrity Monitoring: Enable for critical speed sensors to receive early warnings of signal degradation.

• Sensor Drift Detection: Enable to predict sensor failures and schedule preventive maintenance.

• Calibration Management: Use GE ToolboxST to perform software-triggered self-calibration during scheduled maintenance.

• Controller Firmware: Requires Mark VIe processor firmware v9.5 or later.

• Wiring Guidelines: Use shielded twisted-pair cables. Maintain shield grounding only at the Mark VIe cabinet end.

• Spare Strategy: Keep one spare per turbine; lead times 8–14 weeks.

• Retrofit: Direct replacement for IS200TPROH1C—regenerate configuration in GE ToolboxST.

Important Cautions

1. No Hot-Swap: De-energize rack before insertion/removal.

2. Signal Polarity: For magnetic pickups, observe correct polarity for reliable zero-crossing detection.

3. Trigger Level: Incorrect trigger level can cause missed pulses or false triggering—verify with sensor specifications.

4. Cable Length: For magnetic pickups, use low-capacitance cables for runs exceeding 50 meters.

5. Grounding: Connect AGND to Mark VIe system ground at single star point.

6. Shield Termination: Ground speed probe cable shields only at cabinet end.

7. ESD Handling: Use grounded wrist straps; field repair not possible.

8. Temperature Rating: Verify cabinet ambient does not exceed +70°C or fall below –40°C.

9. Reference Validation: Yellow LED indicates reference drift—schedule factory recalibration or perform software self-calibration if illuminated.

10. Self-Calibration: Perform only when board is de-energized and free from field wiring faults.

11. Calibration Records: Do not modify calibration memory via external tools—use only GE ToolboxST.

12. Signal Integrity Alerts: Investigate weak signal alerts promptly.

13. Sensor Drift Alerts: Investigate drift alerts to replace aging sensors before failure.

14. Frequency Out-of-Range: Monitor diagnostic alerts—investigate sensor or wiring faults.

15. Channel Mapping: With up to 6 channels, verify field wiring maps to correct ToolboxST channel numbers.