Description
Product Parameters
| Parameter | Specification |
|---|---|
| Brand / Series | GE Mark VIe Speedtronic |
| Model | IS200TBAIH1BAA |
| Analog Inputs | 24 channels (4–20 mA, 0–10 V, ±10 V selectable) |
| ADC Resolution | 16-bit SAR with programmable sampling rate (10–500 SPS) |
| Accuracy | ±0.05% of full scale (25°C), ±0.1% over full temperature range — upgraded from ±0.1% / ±0.2% |
| Loop Power | 24 VDC (externally supplied only) |
| Input Impedance | 250 Ω (current mode), > 1 MΩ (voltage mode) |
| Filtering | Programmable low-pass filter (1–50 Hz) with enhanced anti-aliasing |
| Isolation | 2000 VAC (field-to-system) — upgraded from 1500 VAC |
| CMRR | >110 dB @ 50/60 Hz — upgraded from >100 dB |
| Diagnostics | Open-circuit detection, over-range/under-range detection, loop power fault monitoring, reference voltage self-validation |
| Status Indication | 24 green LEDs (channel active), 2 red LEDs (diagnostic fault summary), 1 yellow LED (reference status) |
| Operating Temperature | –40°C to +70°C — upgraded from –30°C to +65°C |
| Storage Temperature | –55°C to +85°C |
| Mounting | VME rack-mount terminal board with front-panel I/O connector |
| Backplane Interface | VME64x (A24/A32, D16/D32/D64) |
| EMC Compliance | IEC 61000-4 Level 4 |
Advantages & Key Features
-
High Channel Density: 24 analog inputs in a single VME slot—triple the density of competing 8-channel modules.
-
Superior Accuracy: ±0.05% full-scale accuracy provides higher measurement precision for critical turbine control parameters.
-
Extended Temperature Range: –40°C to +70°C operation makes IS200TBAIH1BAA suitable for arctic, desert, and unheated turbine enclosures.
-
Enhanced Isolation: 2000 VAC isolation and >110 dB CMRR provide superior protection in high-EMI environments.
-
Flexible Input Configuration: Each channel supports 4–20 mA, 0–10 V, or ±10 V inputs via GE ToolboxST.
-
Programmable Filtering: Onboard low-pass filter (1–50 Hz) optimizes noise rejection vs. response speed.
-
Comprehensive Diagnostics: Open-circuit, over-range/under-range, loop power fault, and reference self-validation per channel.
-
ToolboxST Integration: Full configuration, calibration, and diagnostics via GE ToolboxST.
-
Drop-In Replacement: Direct replacement for IS200TBAIH1B and earlier analog input terminal boards.
Application Fields
-
Gas & Steam Turbines (GE Frame 6B/7EA/9E/HA): Fuel gas pressure/flow, steam pressure/temperature, bearing vibration, lube oil pressure/temperature, cooling water pressure, valve position feedback, generator hydrogen pressure.
-
Combined Cycle Plants: HRSG feedwater flow, steam drum pressure, superheater temperature, condensate flow, extraction pressure.
-
Compressor Stations: Suction/discharge pressure, gas flow, vibration transducers, intercooler temperature.
-
Arctic & Desert Installations: Extreme-environment turbine control cabinets.
-
Offshore Platforms: Marine enclosures with salt-spray and wide temperature swings.
Comparison with Competing Products
| Feature | GE IS200TBAIH1BAA | GE IS200TBAIH1B | Competitor A (Emerson) | Competitor B (Siemens) |
|---|---|---|---|---|
| Analog Inputs | 24 | 24 | 8 | 8 |
| Accuracy | ±0.05% FS | ±0.1% FS | ±0.2% FS | ±0.15% FS |
| Isolation | 2000 VAC | 1500 VAC | 1000 VAC | 500 VDC |
| CMRR | >110 dB | >100 dB | >80 dB | >85 dB |
| Operating Temp | –40°C to +70°C | –30°C to +65°C | 0°C to 50°C | 0°C to 60°C |
| Reference Self-Validation | Yes | No | No | No |
| EMC Filtering | IEC Level 4 | Level 2 | Level 2 | Level 1 |
Key Advantage: IS200TBAIH1BAA delivers 24 analog inputs with ±0.05% accuracy, extended –40°C to +70°C temperature range, 2000 VAC isolation, and reference self-validation—making it the premier analog input terminal board for extreme-environment turbine applications.
Selection Guidelines & Recommendations
-
Input Type: Configure 4–20 mA, 0–10 V, or ±10 V per channel in GE ToolboxST.
-
Loop Power: External 24 VDC supplies required—plan cabinet power distribution accordingly.
-
Filtering: Use 1–10 Hz for temperature/pressure, 20–50 Hz for dynamic signals.
-
Controller Firmware: Requires Mark VIe processor firmware v8.0 or later.
-
Spare Strategy: Keep one spare per turbine; lead times 8–12 weeks.
-
Retrofit: Direct replacement for IS200TBAIH1B—regenerate configuration in GE ToolboxST to access enhanced features.
Important Cautions
-
No Hot-Swap: De-energize rack before insertion/removal.
-
External Loop Power Required: No internal loop power—ensure 24 VDC supplies are connected.
-
Input Overload: Sustained input >30 V or >50 mA may damage input circuitry.
-
Grounding: Connect AGND to Mark VIe system ground at single star point.
-
Shield Termination: Ground shields only at cabinet end.
-
ESD Handling: Use grounded wrist straps; field repair not possible.
-
Filtering Trade-Off: Lower cutoff = better noise rejection but more signal delay.
-
Channel Mapping: With 24 channels, verify wiring maps to correct ToolboxST channel assignments.
-
Power Supply Sizing: Ensure external 24 VDC supplies are sized for all connected transmitters (20–30 mA per channel × 24 channels = 0.48–0.72 A minimum).
-
Temperature Rating: Verify cabinet ambient does not exceed +70°C or fall below –40°C.
-
Reference Validation: Yellow LED indicates reference drift—schedule factory recalibration if illuminated.
WESTINGHOUSE 1C31224G01
A-B 1756-PA75
AB 1794-IT8
BERNECKER 3IF260.60-1
Reviews
There are no reviews yet.